Dual mining question.
When i do Eth + Drc, i get :
29.5mhs on ETH
and
870 on Dcr
But dual on ETH + Sia, i get
23 mhs on ETH
And
500+ on Sia.
Question.
1. Is this normal?
2. Can i set to higher ETH?
Yes, put -dcri 30 for start ... more is this number more will be the second coin and decrease the eth megahash... Try with 30-40 or 50 see when you lose not much mh and you will gain more second coin |
|
|
|
|
Can i make work nicehash only with claymore?
Because nicehash like to use another miner with my 1060 while with rx 480 it does work with claymore always mining eth
|
|
|
|
Please help ETH+ SIA (NICEHASH) DUAL What is the error? EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal adres -epsw x -eworker Miner6 -epool eth.f2pool.com:8008 -ewal adres -epsw x -eworker Miner6 -dpool stratum+tcp://sia.eu.nicehash.com:3360 -dwal adres.Miner6 -dpsw x -dcoin sia -allpools 1 -allcoins -1 -tstop 95 -ftime 10 -mport -3333 -dcri 17 Pictures - http://www.imgup.cz/image/LgJWUse latest version of the miner. Version 9.4 and the same problem :-( Nicehash? You can mine dual with nicehash? Doesn't it do when it want? |
|
|
|
Hi!
I have rx470 strix 8g oc micron, 1750 straps copied.
Is it normal that my setting (-60mV +50% power 1110 clock 2000mem) works fine with single ETH mining with claymore 9.4, but when I do dual ETH+DCR it crashes after 5-20 mins?
Can it be that different -dcri values causes different uptime? Like -dcri 31 works fine, but -dcri 28 crashes?
my start.bat:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -epool eu2.ethermine.org:4444 -ewal 0xb108bfda0a62097d63e6b623fdde27ecb7b8ab61.EMA01 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal mathison.EMAdec01 -dpsw x -dcri 28 -allpools 1 -allcoins 1
Dual mining uses more power, so you can't lower clocks as much. Zcash is the same. You need tested stable settings for each situation. Thanks! Now its running 2.5 hrs with 1100/1950 and seems stabile. Does this seem a fair result: 27 ETH + 755 DCR ? If u go in whattomine and put 27 mh eth and 755 decred it will say you are doing 125 dollars month If you the same with eth + sia coin will be 220 dollars Sia is more profitable now |
|
|
|
What are the mh/s people are getting with Gtx 980 ?
Gigabyte 980 = 21.3 MH/s EVGA 980 = 21.6 MH/s EVGA 980 Ti = 23.5 MH/s Ok my strix 980's 1 getting 20mh/s and the other getting 22mh/s and using 165w each from wall.Are the wattages same as yours? I'll double check when I get home, I don't remember off the top of my head.. Not a good way to use a 980ti bro... you should go mining ezcash |
|
|
|
|
Reading all this reviews i was scared by using shapeshift even if it seems so good... so i tried and..... PERFECT!!!!!!!
I sent etc for ripple all is gone perfect in 5 minutes i had on my wallet!!!! very nice service
|
|
|
|
So when looking through the app store, I can't find any reputable wallets to store Ripple, only shady looking ones with tons of negative ratings from people saying the wallets are stealing their ripple.
Do any of you know of any secure wallets to store it in? For something that's been getting so much hype, I'm having a lot of trouble finding a place to store the things.
LMAO, there is NO SAFE RIPPLE WALLET. You really don't know how the Ripple Consensus Ledger works, do you? Wake the fuck up people!!!!! You are fucking clueless!!!! On May 5, 2015, FinCEN fined Ripple Labs and XRP II US$700,000 for violation of the Bank Secrecy Act,[31] based on the Financial Crimes Enforcement Network's additions to the act in 2013.[51] Ripple Labs agreed to remedial steps to ensure future compliance, which included an agreement to only transact XRP and "Ripple Trade" activity through registered money services businesses (MSB), among other agreements such as enhancing the Ripple Protocol.[31] there is obviosly a safe ripple wallet and the only one is as always ledger nano s support ripple too!!! hardware wallet are the best! |
|
|
|
|
Omg, thanks for the advice guys i was going to use changelly for all my cryptovalues.....
I had a suspect coz they are partner with minergate!
So actually the best exchange remain shapeshift?
|
|
|
|
What driver is the best for GTX 1060? Thanks
im using the last driver for all 12 gtx 1060 3gb i got. overclock 170 core and 950 memory getting 23.5 eth mining claymore stable 90 w from the wall Thanks for answer. On my 3gb 1060 I can run 23.5 too but getting lot of incorrect shares. So I have to stick with +100 core and +450 mem getting 21 Mhs and 65W from wall. What is your card model exactly? i get no bad share at all... try to fix overclock better... maybe try 150 core and 850 mem even the tdp i put 60% |
|
|
|
What driver is the best for GTX 1060? Thanks
im using the last driver for all 12 gtx 1060 3gb i got. overclock 170 core and 950 memory getting 23.5 eth mining claymore stable 90 w from the wall |
|
|
|
hi guys whi i am getting this error? someone ca help me?
16:34:43:769 1900 GPU 0, GpuMiner cu_k02 failed 4, unspecified launch failure
16:34:43:769 1900 GPU 0, GpuMiner kx failed 1
16:34:43:769 1900 Set global fail flag, failed GPU0
16:34:43:769 17c0 GPU 0, GpuMiner cu_k02 failed 4, unspecified launch failure
16:34:43:769 17c0 GPU 0, GpuMiner kx failed 1
16:34:43:769 17c0 Set global fail flag, failed GPU0
16:34:43:769 1900 GPU 0 failed
16:34:43:769 17c0 GPU 0 failed
16:34:43:769 101c GPU 2, GpuMiner cu_k02 failed 4, unspecified launch failure
16:34:43:769 101c GPU 2, GpuMiner kx failed 1
16:34:43:769 101c Set global fail flag, failed GPU2
16:34:43:769 1784 GPU 2, GpuMiner cu_k02 failed 4, unspecified launch failure
16:34:43:769 1784 GPU 2, GpuMiner kx failed 1
16:34:43:769 101c GPU 2 failed
16:34:43:769 1784 Set global fail flag, failed GPU2
16:34:43:769 1784 GPU 2 failed
16:34:43:769 198c GPU 3, GpuMiner cu_k02 failed 4, unspecified launch failure
16:34:43:800 198c GPU 3, GpuMiner kx failed 1
16:34:43:800 179c GPU 1, GpuMiner cu_k02 failed 4, unspecified launch failure
16:34:43:800 179c GPU 1, GpuMiner kx failed 1
this happens dual mining only.
if i do mining etc or eth only it doesnt happen
thanks
any suggestion? thanks  |
|
|
|
Could you help me why that error happen :
7:27:47:780 3a0 Cannot get Overdrive capabilities for adapter 0
07:27:47:788 3a0 Cannot get Overdrive capabilities for adapter 6
07:27:48:710 1318 DevFee: stop mining and disconnect
When mining i want to see gpu temperature how can i do that
I'm Newbie thanks.
Are you using windows? You can do it with many progrmas... And btw while it is mining it show temp by it self already without command |
|
|
|
hi guys whi i am getting this error? someone ca help me?
16:34:43:769 1900 GPU 0, GpuMiner cu_k02 failed 4, unspecified launch failure
16:34:43:769 1900 GPU 0, GpuMiner kx failed 1
16:34:43:769 1900 Set global fail flag, failed GPU0
16:34:43:769 17c0 GPU 0, GpuMiner cu_k02 failed 4, unspecified launch failure
16:34:43:769 17c0 GPU 0, GpuMiner kx failed 1
16:34:43:769 17c0 Set global fail flag, failed GPU0
16:34:43:769 1900 GPU 0 failed
16:34:43:769 17c0 GPU 0 failed
16:34:43:769 101c GPU 2, GpuMiner cu_k02 failed 4, unspecified launch failure
16:34:43:769 101c GPU 2, GpuMiner kx failed 1
16:34:43:769 101c Set global fail flag, failed GPU2
16:34:43:769 1784 GPU 2, GpuMiner cu_k02 failed 4, unspecified launch failure
16:34:43:769 1784 GPU 2, GpuMiner kx failed 1
16:34:43:769 101c GPU 2 failed
16:34:43:769 1784 Set global fail flag, failed GPU2
16:34:43:769 1784 GPU 2 failed
16:34:43:769 198c GPU 3, GpuMiner cu_k02 failed 4, unspecified launch failure
16:34:43:800 198c GPU 3, GpuMiner kx failed 1
16:34:43:800 179c GPU 1, GpuMiner cu_k02 failed 4, unspecified launch failure
16:34:43:800 179c GPU 1, GpuMiner kx failed 1
this happens dual mining only.
if i do mining etc or eth only it doesnt happen
thanks
might that be your "800W from the wall" No this is new rig i just built today and it work well with etc only.... but when i mining with etc+lbc show that error |
|
|
|
|
hi guys whi i am getting this error? someone ca help me?
16:34:43:769 1900 GPU 0, GpuMiner cu_k02 failed 4, unspecified launch failure
16:34:43:769 1900 GPU 0, GpuMiner kx failed 1
16:34:43:769 1900 Set global fail flag, failed GPU0
16:34:43:769 17c0 GPU 0, GpuMiner cu_k02 failed 4, unspecified launch failure
16:34:43:769 17c0 GPU 0, GpuMiner kx failed 1
16:34:43:769 17c0 Set global fail flag, failed GPU0
16:34:43:769 1900 GPU 0 failed
16:34:43:769 17c0 GPU 0 failed
16:34:43:769 101c GPU 2, GpuMiner cu_k02 failed 4, unspecified launch failure
16:34:43:769 101c GPU 2, GpuMiner kx failed 1
16:34:43:769 101c Set global fail flag, failed GPU2
16:34:43:769 1784 GPU 2, GpuMiner cu_k02 failed 4, unspecified launch failure
16:34:43:769 1784 GPU 2, GpuMiner kx failed 1
16:34:43:769 101c GPU 2 failed
16:34:43:769 1784 Set global fail flag, failed GPU2
16:34:43:769 1784 GPU 2 failed
16:34:43:769 198c GPU 3, GpuMiner cu_k02 failed 4, unspecified launch failure
16:34:43:800 198c GPU 3, GpuMiner kx failed 1
16:34:43:800 179c GPU 1, GpuMiner cu_k02 failed 4, unspecified launch failure
16:34:43:800 179c GPU 1, GpuMiner kx failed 1
this happens dual mining only.
if i do mining etc or eth only it doesnt happen
thanks
|
|
|
|
It's been a while since I last mined ETH+DCR or SIA. Can someone let me know what's the current normal hashrate for HD7970's please?
Now mining at miningpoolhub, ETH+SIA, dcri 90, I get some 12Mh/s in ETH and 550MH/s in SIA. That's with Crimson 17 drivers, pixel patched
Thanks
I'm having the same problem. By all accounts, this card should be mining at ~20-22MH/s but I'm only getting 12.5 no matter what I do. I've tried both the latest drivers and 15.12. Pixel Clock Patcher did nothing. Edit: After some research, it seems like this rate is par for the course for the 7970/280x due to the current DAG size slowing it down. Bummer. Seems like other coins are the only answer. Though I might just use mine to dual mine. 12.5 is better than nothing. Dual mining takes a lot more power, eth+sia is 40% more power than eth only. And I remember somebody said is mining musicoin+sia with 7k series card... i just checked it.. etc only 4x rx 480 695w from the wall etc+lbc 800w for 140mh lbc well 100w is good |
|
|
|
Hi guys,
I wanted start to mining but i got a problem!! Rx 480 rx 470 they are not available anymore in Internet!!!!
So.... what i did.... i thought something else to find good enough....
I tried to buy cheap gtx 1060 3gb which i paid 177 euro...
No struggling with bios and other things, just msi afterburner core +100 memory +900/950 i get 23.5 MH/s ethereum as well as are the consumption about 90w each card.
So my actual rigs they are
6x 1060 3gb about 137 MH/s 700w (177 euro x6)
6x 1060 3gb 137mh 700w
5x rx 480 about 130 mh 900w (250 euro x 5)
4x rx 480 130 mh 700/750
Do some calculations and you will get that nvidia they are actually better than amd costing 250😉😉😉 hope to have help you.
I have one 6 GPU AMD rig (mostly R9 290s) and a 4 GPU Nvidia rig which is 2 x 1070's & 2 x 1060 6GB. I love the Nvidia rig! It's doing 105-110 mh/s for only 550-600 watts! Unbelievable right? Anyway - in your post you said that you OC the core clock +100 and memory +900/950? I have found with my Nvidia cards that I can actually underclock the core, I have all my Nvidia cards at core -200 and memory +750 - and it's no different to core +75 memory +750, and it saves some power. I would like to know how did you underclocked your nvidia ? Nvdia smi or afterburner? i use msi afterburner or new evga precision tool they are the same |
|
|
|
It's been a while since I last mined ETH+DCR or SIA. Can someone let me know what's the current normal hashrate for HD7970's please?
Now mining at miningpoolhub, ETH+SIA, dcri 90, I get some 12Mh/s in ETH and 550MH/s in SIA. That's with Crimson 17 drivers, pixel patched
Thanks
i just tried all dual mining etc+pascal+sia+decred+lbry well i got impressed by etc+lbry my 4 rx 480 was gettin etc 104 mhs but when mining pascal or sia it goes 80 just decred is good but is not worth it to mine tbh last i tried etc+lbry i am getting 100mh (losing 4mh) and very well 144 mh on lbry. going to whattomine u can see that with just 144 on lbry profit is 78 dollars month which i think is very profitable rn good mining!!!!!!!!!!!!!!!!!!!!!!! lookguys what a 1060 3gb can do https://youtu.be/1uhSfOpvHks?t=7359If you don't want to lose etc/eth hashrate while dual mining, use the -dcri option. Start with 30 and slowly decrease/increase until you are happy with the eth/etc vs sia/pascal/lbry performance. Lower dcri for faster ETH/ETC, slower sia/pascal/lbry. And vice versa. I tried to put -dcri 16 but it say unknown command Can u tell me the exact thing to write pls? |
|
|
|
It's been a while since I last mined ETH+DCR or SIA. Can someone let me know what's the current normal hashrate for HD7970's please?
Now mining at miningpoolhub, ETH+SIA, dcri 90, I get some 12Mh/s in ETH and 550MH/s in SIA. That's with Crimson 17 drivers, pixel patched
Thanks
i just tried all dual mining etc+pascal+sia+decred+lbry well i got impressed by etc+lbry my 4 rx 480 was gettin etc 104 mhs but when mining pascal or sia it goes 80 just decred is good but is not worth it to mine tbh last i tried etc+lbry i am getting 100mh (losing 4mh) and very well 144 mh on lbry. going to whattomine u can see that with just 144 on lbry profit is 78 dollars month which i think is very profitable rn good mining!!!!!!!!!!!!!!!!!!!!!!! lookguys what a 1060 3gb can do https://youtu.be/1uhSfOpvHks?t=7359 |
|
|
|
Hi guys,
I wanted start to mining but i got a problem!! Rx 480 rx 470 they are not available anymore in Internet!!!!
So.... what i did.... i thought something else to find good enough....
I tried to buy cheap gtx 1060 3gb which i paid 177 euro...
No struggling with bios and other things, just msi afterburner core +100 memory +900/950 i get 23.5 MH/s ethereum as well as are the consumption about 90w each card.
So my actual rigs they are
6x 1060 3gb about 137 MH/s 700w (177 euro x6)
6x 1060 3gb 137mh 700w
5x rx 480 about 130 mh 900w (250 euro x 5)
4x rx 480 130 mh 700/750
Do some calculations and you will get that nvidia they are actually better than amd costing 250😉😉😉 hope to have help you.
Dual mining on 6x rx 480 167 mh/s ETH with 5000+ mh/s DRC = 900w  I didn't try to mining with eth+decred... i should try with Nvidia and post results.... |
|
|
|
|
Show Posts
