 Show Posts
|
|
Pages: [1] 2 3 4 5 »
|
|
2
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.8 - V8 & algo switching
|
on: October 23, 2018, 03:45:14 PM
|
|
SRBMiner-CN.exe --config Config\config-normalv8.txt --pools pools.txt --enableduplicategpuid --logfile LOGTIME.txt
"gpu_conf" :
[
{ "id" : 0, "intensity" : 124, "worksize" : 16, "threads" : 2, "persistent_memory" : false},
{ "id" : 1, "intensity" : 124, "worksize" : 16, "threads" : 2, "persistent_memory" : false},
],
}
1222/1100 mhz
why is it that my hashrate for vegaFE is still 19xx?
|
|
|
|
|
5
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.8 - V8 & algo switching
|
on: October 21, 2018, 02:04:44 PM
|
Hi Guys, I'm new here and new with SRBMiner too. I need some suggestions on how to improve my hash rate. Currently my 7 Vega rig only managed to reach about 1850 H/s per GPU with total power draw of 1550 Watt at the wall. My GPU is Gigabyte Vega 56 OC with stock BIOS. However, I've applied Soft Power Play Tables into it and currently using driver version 18.6.1. My OverdriveNTool and Config settings as the following: GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905
GPU_P7=1408;905
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=960;900
Fan_Min=3700
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=75
Power_Target=0 {
"cryptonight_type" : "normalv8",
"intensity" : 0,
"double_threads" : true,
"gpu_conf" :
[
{ "id" : 0, "intensity" : 112, "worksize" : 16, "threads" : 2, "persistent_memory" : false},
{ "id" : 1, "intensity" : 112, "worksize" : 16, "threads" : 2, "persistent_memory" : false},
{ "id" : 2, "intensity" : 112, "worksize" : 16, "threads" : 2, "persistent_memory" : false},
{ "id" : 3, "intensity" : 112, "worksize" : 16, "threads" : 2, "persistent_memory" : false},
{ "id" : 4, "intensity" : 112, "worksize" : 16, "threads" : 2, "persistent_memory" : false},
{ "id" : 5, "intensity" : 112, "worksize" : 16, "threads" : 2, "persistent_memory" : false},
{ "id" : 6, "intensity" : 112, "worksize" : 16, "threads" : 2, "persistent_memory" : false},
]
}I'm looking forward to reach 1900 H/s OR same hash rate (1850 H/s) with lower power consumption. Thanks in advance guys! pfft the moment I apply the soft power play tables i've been using since last year, 1 or mroe of the gpus goes error 43 |
|
|
|
|
9
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.8 - V8 & algo switching
|
on: October 19, 2018, 04:57:42 PM
|
|
ok this is what I got and it's strange. for 1 of them I had very little hash drop
the rest had significant drops
miner 1
5x vega56 flashed to 64(reference)
before v8 it was 9855+h/s
v8 8955h/s 1260w at the wall
miner 2
4x vega 64 (reference)
before v8 it was 7900h/s
v8 7755h/s
1250mhz/1100mhz 935w
miner 3
6x vega 56 (non ref, 1 PC vega 56 and 5 gigabyte vega 56)
before v8 10300-11000h/s
v8 10300+h/s 1400w
So for every vega, I need 2 IDs?
{ "id" : 0, "intensity" : 124, "worksize" : 16, "threads" : 2}
{ "id" : 1, "intensity" : 124, "worksize" : 16, "threads" : 2}
{ "id" : 2, "intensity" : 124, "worksize" : 16, "threads" : 2}
{ "id" : 3, "intensity" : 124, "worksize" : 16, "threads" : 2}
{ "id" : 4, "intensity" : 124, "worksize" : 16, "threads" : 2}
{ "id" : 5, "intensity" : 124, "worksize" : 16, "threads" : 2}
{ "id" : 6, "intensity" : 124, "worksize" : 16, "threads" : 2}
{ "id" : 7, "intensity" : 124, "worksize" : 16, "threads" : 2}
|
|
|
|
|
14
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)
|
on: October 18, 2018, 03:43:15 PM
|
Hashrate on cnv8 has cratered. Vega 64s/blockchain drivers/HBCC enabled. intensity 7. hashing at under 1k...
This is a known problem with the blockchain drivers. Update to 18.5.1, they are more stable and don't need the hardware reset trick and will fix performance with V8. HBCC should be turned off. Vega64 can go with intensity 9 if used headless (no desktop running on it), i've set the switch-radeon-gpu --hbcc=off but cast xmr still says hbcc is on Did you add a restart or autorestart command to switch-radeon-gpu? It should be "switch-radeon-gpu --hbcc=off autorestart" to also reset the device? If yes and the device is not resetting try a reboot. yes i did this is my run.bat switch-radeon-gpu --hbcc=off autorestart cast_xmr-vega --algo=-1 -S xmr-us-east1.nanopool.org:14444 --intensity 7 -G 0,1,2,3,4,5 -u worker.name --fastjobswitch I typed the same thing in the jj reset and run because I need it to set the fan profile and speed in ODNT (im using the older reg mod) |
|
|
|
|
15
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)
|
on: October 18, 2018, 02:05:05 PM
|
Hashrate on cnv8 has cratered. Vega 64s/blockchain drivers/HBCC enabled. intensity 7. hashing at under 1k...
This is a known problem with the blockchain drivers. Update to 18.5.1, they are more stable and don't need the hardware reset trick and will fix performance with V8. HBCC should be turned off. Vega64 can go with intensity 9 if used headless (no desktop running on it), i've set the switch-radeon-gpu --hbcc=off but cast xmr still says hbcc is on |
|
|
|
|
17
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Any word on amd vega hash rates?
|
on: June 19, 2018, 01:08:21 PM
|
I tried flashing the vega 64 bios to the vega56 card and this is what I got
>>
Old SSID: 2388
New SSID: 2387
The result of RSA signature verify is PASS.
Old DeviceID: 687F
New DeviceID: 687F
Old Product Name: Vega10 A1 XL D05003 32Mx128 J8314OAL.HLD E104 2018
New Product Name: Vega10 A1 XT D05001 32Mx128 J7B14OAI.SLD E108 2017
Old BIOS Version: 016.001.001.000.000000
New BIOS Version: 016.001.000.004.000000
Flash type: GD25Q21B
programmed = 0, romsize = 40000
ROM not erased
ERROR: 0FL01
then when I entered the commands atiflash -unlockrom 1, it says "Format: amdvbflash"
you need to switch to the other bios, reference vegas have 2 different bios... one is locked and not flashable  it's actually the gigabyte gaming vega 56. anyway I'll try again later.. |
|
|
|
|
18
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Any word on amd vega hash rates?
|
on: June 18, 2018, 02:00:15 PM
|
|
I tried flashing the vega 64 bios to the vega56 card and this is what I got
>>
Old SSID: 2388
New SSID: 2387
The result of RSA signature verify is PASS.
Old DeviceID: 687F
New DeviceID: 687F
Old Product Name: Vega10 A1 XL D05003 32Mx128 J8314OAL.HLD E104 2018
New Product Name: Vega10 A1 XT D05001 32Mx128 J7B14OAI.SLD E108 2017
Old BIOS Version: 016.001.001.000.000000
New BIOS Version: 016.001.000.004.000000
Flash type: GD25Q21B
programmed = 0, romsize = 40000
ROM not erased
ERROR: 0FL01
then when I entered the commands atiflash -unlockrom 1, it says "Format: amdvbflash"
|
|
|
|
|
20
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Any word on amd vega hash rates?
|
on: April 11, 2018, 04:55:45 PM
|
...the miners change and my intensities dont work, odnt dont work.
xmr-stak? ' xmr stak and xmr aeon stak Try SRBminer with intensity 112. its working fine. or use CastXmr. Why xmr-stak?! because of its integration with the JJ's hash monitor. I never figured out the cast xmr;s UI that sets hash rate thresholds. anyway I did use cast xmr and got similar hashrate. Not sure where the problem is. Using win 10 1709 |
|
|
|
|
