The most profitable mining for 1080 ti now is Skunk Nicehash paying minimum $5/day
Where did you find it, i don't see this coin on whattomine.com/coins nobody read whattomine.com, just try running ccminer to nicehash pool, check yourself the rates in 5 minutes. thank me later. The most profitable mining for 1080 ti now is Skunk Nicehash paying minimum $5/day
5 a day per card? minimum. People still trading the price on nicehash.com Just tried. Getting less than $2 a day per card. Think Skunk mining is over with the recent crash Yes. Crashed. back to ZEC now
|
|
|
I don't use crossfire, GPUZ show crossfire is disable. I d'ont know what is RDP i think the main reason you put the card to the pci-e directly
|
|
|
I have been lurking here for a while, but decided to jump in the discussion. I have been mining ETH on my gaming rig for a few months now. It's a 1080Ti pulling about 36-37mh/s when overclocked. I'm always late to the party, but I've been waiting on those damn AMD cards forever and retailers in my country keep pushing release dates and I got tired of waiting so I've decided to pull the trigger and bought 10x1060 3gb. Asus Phoenix 1060 3gb which went for dirty cheap, 200 each (cheap here in Sweden). And these 1060 are not very powerhungry. I also read it's easer to manage them compared to AMD cards. Just OC the memory and you're good to go, no need to mod BIOS. Now I wonder if I shoot myself in the foot by ordering 3gb cards instead of 6gb. But I did read that we will hit 3gb limit mid 2018, and by that time I won't need these cards anyway. Some people report that 3gb cards run lower hash rate because they are near the limit. How true is that? I expect these cards to run about 20-23mh/s each, but if they end up at 15mh/s each, then screw it 20+ is easy. you can mine other coin like zcash
|
|
|
Finally i got my 5 X 1060 3G rig up&running. 105Mhs / 600 Watt. thanks guys
|
|
|
Does anyone know what memory brand these two models have below? And how do you think they will perform in terms of default hashing rate, and the hashing rate and power usage when flashed? Thanks
ASUS Radeon RX 580 8GB Dual-fan OC Edition GDDR5 DP HDMI DVI VR Ready AMD Graphics Card (DUAL-RX580-O8G) [https://www.amazon.com/B071L1VGQW] ASUS ROG-STRIX-RX580-O8G-GAMINGOC Edition GDDR5 DP HDMI DVI VR Ready AMD Graphics Card [https://www.amazon.com/dp/B071D8YQJD]
I have 2 Strix. 1 goes 28 modded bios, the other 27 modded bios. Power usage 105W and 95W. The second card can't reach 1950 MHz. Which memory does the strix 580 have and does it meet your expectations? i have 3 asus rog rx580. all samsung memory
|
|
|
anyone here with an rx 560 miner? curious how it performs in claymore? might make one since 570s or 80s are really hard to get
you can try 1060 /1070. i'm planning add a 1060 rig
|
|
|
My 1080 Ti got fucked today while mining ETH. I was testing out -ethi 1 to see if I could mine in the *background* while continuing to use my computer for light activities. Everything seemed unusually fine, then suddenly my screen started artifacting, flashed a couple times, and went black. I figured it was just an unstable overclock (even though my +500 mem offset worked fine before), so I went ahead and restarted my computer... Nope. Long story short, I spent a few hours troubleshooting. I did everything I could think of to isolate the actual issue. Reset CMOS, different PCI slots, DDU'd drivers, booted with with iGPU, set motherboard to PCI graphics, tested mobo with a 570 from my rig, I even switched PSU cables and plugged them into different 8-pin slots. I reinstalled windows to rule out any software issue. I gave up and had EVGA issue me an RMA. I packed the card and it'll be on its way to California on Monday. Not saying Claymore 9.5 is the causation of my issue. Maybe it's just a coincidence my card decided to give out at that particular time. I have a 1080 Ti FE with a Hybrid kit installed. My OC offsets were (if I can recall correctly): 85% power 100+ core 500+ mem No voltage adjustments Anyways, here are some PCB shots I took if anyone wants to identify a blown diode or whatever: http://imgur.com/a/oxm9csad story my 1060 can 600+ mem working 24/7
|
|
|
Hi @Igloczek , maybe your GTX-1060-3 is running at a higher return (with 305W from wall) @PanneKopp actually my 1060-3 mine faster than yours 1060-6 It takes 305W from the wall (with more powerful CPU), but eletricicty cost only 0.10$/kWh, so I don't care about trimming down power consumption that much. but my concept is much more efficient with only 230W from wall, when mining equihash my unit is about 3.2 - 3.5 SOL/Watt (~570 SOL). ... if IŽd get your cheap energy-prices, IŽd throw many old (ROIed) cards on the table again. 120 *2 * 116% = 243 Wh
|
|
|
I just got a few Zotac 1060 AMP 6gb cards @ $239 I am impressed Zotac uses Samsung K4G80325FB GDDR5 memory chips I have not overclock they run ~19mhs etherium each
orverclock it. will improve 2~4 Mh/s
|
|
|
i have a problem abou the GTX 1060 3G eth mining hashrate. in win 7 it's working about 20 Mh/s but when i try to mining with win 10. this hashrate is droped only get 2.5 Mh/s. anyone get this problem ? btw My rx580 working The solution is here https://www.youtube.com/watch?v=NvD57PyEJz8Thanks for your help. current back to win 7 .will try later
|
|
|
I just started my mining computer up again with 9.4. I can't get my 2nd gpu to mine more than 2.7mhs. It should be doing 18-22. Crossfire is disabled. It's a 2gb xfx r9 380. Any ideas? New win 10 install latest amd drivers
I have same problem, can't get it work. Sometimes Claymore watchdog clocks memory speed very low if there is an issue. Use MSI Afterburner to set the core and memory speeds. Hi, I think the speeds are okei? https://www.upload.ee/image/7074840/ethmining.pngWin 10 Same Problem .but in win 7 it's works
|
|
|
rig mixed amd & nvidia. working in win 7 but in win 10 the nvidia not works
|
|
|
guys i have installed win 7 x64 one of my 980 hashing 19mh/s but the other one is 7mh/s.I am using this EthDcrMiner64.exe --epool eu1.ethpool.org:3333 -ewal 0x94fDE0f751922cD3b772450127B0497202da33e9 -ethi 16 -dbg -1 -mode 1 -mport 0 How can i fix the lower hash by using a search button above or reading carefully through this thread same problem. can you tell what should i search?
|
|
|
i have a problem abou the GTX 1060 3G eth mining hashrate. in win 7 it's working about 20 Mh/s but when i try to mining with win 10. this hashrate is droped only get 2.5 Mh/s. anyone get this problem ? btw My rx580 working
|
|
|
i have a problem abou the GTX 1060 3G eth mining hashrate. in win 7 it's working about 20 Mh/s but when i try to mining with win 10. this hashrate is droped only get 2.5 Mh/s. anyone get this problem ? btw My rx580 working
|
|
|
i have a problem abou the GTX 1060 3G eth mining hashrate. in win 7 it's working about 20 Mh/s but when i try to mining with win 10. this hashrate is droped only get 2.5 Mh/s. anyone get this problem ? btw My rx580 working
|
|
|
just decrease the core and the power limit and increase the mem . I THINK THAT WORKS
|
|
|
card is inno3d gtx 1060 3G
|
|
|
i have a problem abou the GTX 1060 3G eth mining hashrate. in win 7 it's working about 20 Mh/s but when i try to mining with win 10. this hashrate is droped only get 2.5 Mh/s. anyone get this problem ? btw My rx580 working
|
|
|
Carlos L. where are you? can't withdraw 3 days!can you plz check it
|
|
|
|