jackbox
Legendary
 Offline
Activity: 1246
Merit: 1024
|
 |
June 02, 2017, 04:51:37 AM |
|
I just started my mining computer up again with 9.4. I can't get my 2nd gpu to mine more than 2.7mhs. It should be doing 18-22. Crossfire is disabled. It's a 2gb xfx r9 380. Any ideas? New win 10 install latest amd drivers
I have same problem, can't get it work. Sometimes Claymore watchdog clocks memory speed very low if there is an issue. Use MSI Afterburner to set the core and memory speeds. |
|
|
|
|
Nokia555
|
|
June 02, 2017, 05:06:30 AM |
|
I just started my mining computer up again with 9.4. I can't get my 2nd gpu to mine more than 2.7mhs. It should be doing 18-22. Crossfire is disabled. It's a 2gb xfx r9 380. Any ideas? New win 10 install latest amd drivers
I have same problem, can't get it work. Sometimes Claymore watchdog clocks memory speed very low if there is an issue. Use MSI Afterburner to set the core and memory speeds. Hi, I think the speeds are okei? https://www.upload.ee/image/7074840/ethmining.png |
|
|
|
|
Andrey123
|
|
June 02, 2017, 05:12:05 AM |
|
Hello! Can you see the Config file?
-epool eu1-etc.ethermine.org:4444
-ewal Purse address ETC
-epsw x
-dpool dcr.coinmine.pl:2222
-dwal login.name worker
-dpsw password worker
-esm 2
-mode 0
-gser 2
-asm 2
-etha -1,-1
-ethi 11,11
-allpools 1
-allcoins -1
-erate 1
-estale 1
-dcri 48
-r 1
-retrydelay 20
-dbg 0
-tt 70
-ttdcr 80
-ttli 80
-tstop 82
-fanmin 30
-mport 0
Four cards: Sapphire Nitro Radeon RX 480 8G D5 OC 8GB
Now two cards and the following results are connected:
ETH - Total Speed: 46.003 Mh/s, Total Shares: 364, Rejected: 0, Time: 08:39
ETH: GPU0 23.133 Mh/s, GPU1 22.870 Mh/s
DCR - Total Speed: 2208.150 Mh/s, Total Shares: 1487, Rejected: 24
DCR: GPU0 1110.393 Mh/s, GPU1 1097.757 Mh/s
And the hashed changes constantly (
Do I need to remove something from the file or add it?
|
| Hello! Voluntary donations that will go towards the development of my coin.
34bwEhH3GMx6swYXt2NBfFbYGkdTcaWtXz....BTC | |
| |
|
|
|
|
|
antiycda
|
|
June 02, 2017, 06:12:13 AM |
|
I just started my mining computer up again with 9.4. I can't get my 2nd gpu to mine more than 2.7mhs. It should be doing 18-22. Crossfire is disabled. It's a 2gb xfx r9 380. Any ideas? New win 10 install latest amd drivers
I have same problem, can't get it work. Sometimes Claymore watchdog clocks memory speed very low if there is an issue. Use MSI Afterburner to set the core and memory speeds. Hi, I think the speeds are okei? https://www.upload.ee/image/7074840/ethmining.pngWin 10 Same Problem .but in win 7 it's works  |
|
|
|
|
Nokia555
|
|
June 02, 2017, 06:18:39 AM |
|
Thanks, i'l give it a try.
|
|
|
|
Casalania
Full Member
Offline
Activity: 491
Merit: 100
#SWGT PRE-SALE IS LIVE
|
|
June 02, 2017, 07:08:27 AM |
|
I think we shall ask AMD about this question. |
|
|
|
mattmathison
Newbie
Offline
Activity: 17
Merit: 0
|
|
June 02, 2017, 07:16:19 AM |
|
Hey guys!
Yesterday I started mining ETH and DCR with claymore 9.4. ETH is ok, I can track it on ethermine.org, but something is wrong with DCR. I cant see anything on dcr.suprnova.cc
The miner says that all my DCR shares are rejected.
Here is my bat file:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xb108bfda0a62097d63e6b623fdde27ecb7b8ab61.EMA01 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal EMAdec01 -dpsw x -dcri 31 -allpools 1 -allcoins 1
Can you help me pls what did I do wrong?
THX
|
|
|
|
|
gOCe
Newbie
Offline
Activity: 46
Merit: 0
|
|
June 02, 2017, 07:38:28 AM |
|
-dwal matt.rig1 You need a defined worker in suprnova ex rig 1 Then dwal is youruserinsuprnova.workeryoudefined Hey guys!
Yesterday I started mining ETH and DCR with claymore 9.4. ETH is ok, I can track it on ethermine.org, but something is wrong with DCR. I cant see anything on dcr.suprnova.cc
The miner says that all my DCR shares are rejected.
Here is my bat file:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xb108bfda0a62097d63e6b623fdde27ecb7b8ab61.EMA01 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal EMAdec01 -dpsw x -dcri 31 -allpools 1 -allcoins 1
Can you help me pls what did I do wrong?
THX
|
|
|
|
|
webxass.de
Member
Offline
Activity: 98
Merit: 10
|
|
June 02, 2017, 08:33:42 AM |
|
what does "checkread timeout" mean?
after some days of mining i just realised some temp drops in my logfiles and after some research i found the reason in "checkread timeout"
Is this pool/connection related or is there any issue with my rig?
|
|
|
|
Maxwell49
Newbie
Offline
Activity: 32
Merit: 0
|
|
June 02, 2017, 09:49:53 AM |
|
Which is the best video card for mining?
maybe Sapphire RX 570 and 580 |
|
|
|
|
mattmathison
Newbie
Offline
Activity: 17
Merit: 0
|
|
June 02, 2017, 09:59:33 AM |
|
Thank you very much! You saved my day !!!  -dwal matt.rig1 You need a defined worker in suprnova ex rig 1 Then dwal is youruserinsuprnova.workeryoudefined Hey guys!
Yesterday I started mining ETH and DCR with claymore 9.4. ETH is ok, I can track it on ethermine.org, but something is wrong with DCR. I cant see anything on dcr.suprnova.cc
The miner says that all my DCR shares are rejected.
Here is my bat file:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xb108bfda0a62097d63e6b623fdde27ecb7b8ab61.EMA01 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal EMAdec01 -dpsw x -dcri 31 -allpools 1 -allcoins 1
Can you help me pls what did I do wrong?
THX
|
|
|
|
|
Maxwell49
Newbie
Offline
Activity: 32
Merit: 0
|
|
June 02, 2017, 10:06:00 AM |
|
Which is the best video card for mining?
maybe Sapphire RX 570 and 580 Thank you bro  np RX 570 22 mh/s RX 580 24 mh/s |
|
|
|
|
spyder09
Member
Offline
Activity: 60
Merit: 10
|
|
June 02, 2017, 10:17:24 AM |
|
Disabled watchdog still only 2mhs on second card any other suggestions?
|
|
|
|
|
|
Emoclaw
|
|
June 02, 2017, 10:49:00 AM |
|
Which is the best video card for mining?
maybe Sapphire RX 570 and 580 Thank you bro np RX 570 22 mh/s RX 580 24 mh/s Those hashrates are actually quite bad, unless you're stock on everything. Mod the BIOS and get the memory to 2000MHz (2200 if you get no errors). |
|
|
|
|
|
Hurtman
|
|
June 02, 2017, 10:49:40 AM |
|
Which is the best video card for mining?
maybe Sapphire RX 570 and 580 Thank you bro np RX 570 22 mh/s RX 580 24 mh/s 28-31 mh/s bios mode |
|
|
|
|
mattmathison
Newbie
Offline
Activity: 17
Merit: 0
|
|
June 02, 2017, 11:06:13 AM |
|
As far as I know its SAPPHIRE RX470 NITRO+ 8GB with Hynix RAM, if you can get from somewhere, even if its used. Which is the best video card for mining?
maybe Sapphire RX 570 and 580 Thank you bro np RX 570 22 mh/s RX 580 24 mh/s 28-31 mh/s bios mode |
|
|
|
|
spyder09
Member
Offline
Activity: 60
Merit: 10
|
|
June 02, 2017, 11:39:32 AM |
|
could the low hashrate be because its a 2gb card?
|
|
|
|
|
|
platinum4
|
|
June 02, 2017, 11:51:10 AM |
|
That's the problem, it's a 2GB card. Tongas do this.
Edit: I just saw he mentioned it was an XFX 2GB RX 380. That's the expected ETH hashrate right now.
|
|
|
|
|
jackbox
Legendary
Offline
Activity: 1246
Merit: 1024
|
|
June 02, 2017, 11:59:50 AM |
|
Which is the best video card for mining?
My personal preference is a modded RX 470/480. Right now they are next to impossible to find. If you can find any at a reasonable price buy them as the next time you look they will not be available. |
|
|
|
webxass.de
Member
Offline
Activity: 98
Merit: 10
|
|
June 02, 2017, 12:35:52 PM |
|
what does "checkread timeout" mean?
after some days of mining i just realised some temp drops in my logfiles and after some research i found the reason in "checkread timeout"
Is this pool/connection related or is there any issue with my rig?
|
|
|
|
|
