Just an update for the people out there still supporting Krugercoin;

The new site is available at;

https://www.krugercoin.org/

Block Explorer available at;

https://www.krugercoin.org/node/

Current Active Nodes;

89.185.100.225:8771
91.206.16.214:8771
45.32.236.177:8771
103.80.26.180:8771
211.152.32.35:8771

Github;

https://github.com/krugercoin-project

https://github.com/krugercoin-project/krugercoin0.6.3.0

https://github.com/krugercoin-project/krugercoin0.7.3.0

https://github.com/krugercoin-project/krugercoin0.9.3.0

https://github.com/krugercoin-project/krugercoin0.10.3.0

Linux Windows and Mac clients available.

Please consider running a node to support the network;

Full disclosure;

www.vultr.com will give you $100 free to try their severs if you use my reference link below

https://www.vultr.com/?ref=8474049-6G

you would be able to run a single node for 20 months or two nodes for 10 months

should you remain at least active for 30+ days and use at least $25 they will give me $25 referral fee.

Deploy a new server, use any Server Location with Server Type Ubuntu Ubuntu 16.04 x64 and Server Size 25 GB SSD 1 CPU 1024MB Memory 1000GB Bandwidth

use the bash-installation-files for Krugercoin 0.10.3.0 at;

https://github.com/krugercoin-project/bash-installation-files

I will assist anyone that want to do this and do not have the knowledge to do so - set can be done in less than 30 minutes

Exchange available at;

https://freiexchange.com/

I will release more information the weeks to come about using Krugercoin on Windows with the Windows Subsystem for Linux

Information at;
https://docs.microsoft.com/en-us/windows/wsl/install-manual

Download at;
https://aka.ms/wsl-ubuntu-1604

The newer version 0.14.2 will be made available as soon as the majority users move to version 0.10.3

In the 0.14.2 version, the magic bits will be changed in order to fix the oldest bug in the code allowing at least four other coins to hijack the blockchain when their hash power increase. The proper merkle root and  genesis hashes will be added to the main net, test net and reg net.

Want to convert your krugercoin to bitcoin/litecoin - pm me for testing an automated escrow service that I am working on - work in progress.

PM me if you do not want to be openly known as a supporter.

Thx

Hi,

New development!

After importing the address generated on the 0.16.3 client into the 15.99.8 client, I now have another column in the Balances section "Watch-only"



Are there anyone that can tell me the story behind this?

Thank you,

H

Hi DataSea,

I appreciate the assistance, however the transaction did not came through on my side.

On this address I made a payment from the address to the same address and it would not go into the local mem pool nor did it enter any of the nodes connected to the client.

This address are now imported into  the 0.15.9.08 version and it show the payment to it self with all the confirmation sine the 6th of July 2020 -  the 0.16.3 client do not see the transactions on the block chain.

I'll have a look at the previous posts to see if any one mention a possible problem or maybe Graham will be able to tell us.

Anyway, just right click on the transaction, select abandon and the coin will appear in your wallet again.

Thanks,

H

@rastoveli2113

Thank you, I am making use of https://freiexchange.com, however, my offering is not inline with https://freiexchange.com/ as the lowest offer is 0.00000001 BTC / KGC

and my offer is x 10 lower than that 0.000000001 BTC / KGC and is open to anyone that is willing to do the exchange with me.

I have some idea why https://www.github.com removed the Windows Binaries for Krugercoin 9.3 - might me a Micosoft thing.

The wallet links will be posted again on https://www.krugercoin.org for the mac wallet, linux wallet and all the other wallets that is available.

The explorer is available at https://www.krugercoin.org/node with four active nodes. One of these nodes are operated by a user that aims to protect Krugercoin and increase hashing power as soon as anyone try to take control of the network.

Found the last update;

https://github.com/coinerd/krugercoin/releases/tag/v0.9.3-beta1

H

Hi,

Successfully Cross Compiled Datacoin v0.16.3.0-74075b1f3-dirty Windows Binaries on Ubuntu 18.04

Notes;

Patch file for czmq and mingw32 required to cross compile.
Compile with --with-incompatible-bdb and --with-gui=yes

Running -reindex now and then tests will begin between wallets and previous wallets - let me know if you want to be part of this.

Will keep you posted on the progress.

Download of the Windows Binaries v0.16.3.0 - https://www.datacoin.tk/source/?dir=v0.16.3.0

Thx,

H

KGC - BTC

I am looking for more Krugercoin to buy;

OFFER :BTC 0.0001 / 100,000 KGC
OFFER :BTC 0.001 / 1,000,000 KGC

Please contact via PM

Thank you,

Hamburger

Compiling Krugercoin 0.9.3 on Ubuntu 20.04

I was able to compile Krugercoin 0.9.3 on Ubuntu 20.04 using a virtual server.

Any other people out there that will be interested in upgrading Krugercoin to a higher version, please contact me. I will in the next few weeks start converting to a higher version and I would appreciate it if you would contact me via PM.

Thank you,

Hamburger

Hi,

  Datacoin 16.3 wallet receive transferred funds from any other client tried.

  Datacoin 16.3 wallet sending funds does not work.

  Any one running Datacoin 16.3 and have a balance available - please send some DTC to dEnvzaRgyPtR2mZLPwTwN7LgpasN9rJ42H and post the amount and address here for a refund. Add your Datacoin 16.3 ip here to see if these clients want to speak to each other.

  Windows Binaries put on ice until sending can be sorted out.

Tnx,

H

Hi,

Compiled Datacoin v0.16.3 on Ubuntu 20.04 successfully and will now attempt a cross compilation for windows.

Notes;

Berkeley DB4 will produce an error.
Compile with --with-incompatible-bdb to make use of Berkeley 5.3.28 (September 9, 2013).
Madpool fix still required for compiling.
Instal QT5 to produce a GUI.
Tnx to gjhiggins for removing the warning notification when accessing the in wallet Blockchain.

Will keep you posted on the progress.

Thx,

H

Good Morning,

Have anyone compiled Datacoin v0.16.3 on Ubuntu 20.04 successfully?

It seems like I have all the dependencies installed to compile the four executable files for Datacoin v0.16.3. I received no warnings or errors after make and is now waiting for make clean to complete before I will be able to test.

Will let you know if all went well later today.

Tnx,

H

Checkout the Datacoin (DTC) Source-Code Analysis at

https://coincode.sh/c/dtc/

Hi CoinCode_sh,

Just wanted to know how long will it take to list a coin once the form was submitted?

Tnx,

Hamburger

Hi,

You could have a look at https://www.bytestamp.net/ - it is a free tool to timestamp & produce proof of existence of anything.

If you want to do it your self, have a look at https://bitcointalk.org/index.php?topic=2188160.msg50735129#msg50735129 - this is done using Datacoin.

Hope it will put you on the right track.

H

Upgrading Krugercoin 0.9.3 to Krugercoin 0.10.2

It's me again!

Had a relatively long absence due to health reasons.

Anyways, are there any other people out there that will be interested in upgrading Krugercoin to a higher version?

Send me a pm or post here to discuss the way forward.

Thank you,

Hamburger

_{Some notes;
Do not bother with sending a compiled versions to my inbox - I need to be able to compile from source in order to trust you.
Do not send me the 10.2 version that I paid for and pawn it off as your own.
If you decide to send me what I paid for, I'll be very much happy!}

@George5

I had a look at their offering, however, an exchange like https://yobit.net/ and https://freiexchange.com/ offer a far better service to the community at no cost.

Thanks,

Hamburger

Hi,

Novaexchange is not the end of the world! I could say a lot but let rather point you to;

https://yobit.net/ -> will take wallet out of maintenance when they receive an upgraded version.
https://freiexchange.com/

Hambuger

Upgrading Krugercoin 0.9.3 to Krugercoin 0.10.2


Are there any other people out there that will be interested in upgrading Krugercoin?

There were unfortunately a problem with the people that I have paid to do the upgrade Krugercoin 0.9.3 to Krugercoin 0.10.2

It would have been nice to release a new version by 10 October to celebrate the birth date of Paul Kruger.

Anyway, send me a pm or post here to discuss the way forward.

Thank you,

Hamburger

Hi,

Try this, stop the client and remove peers.dat and ban.dat file.

Edit your datacoin.conf file to only have one ip to connect to;  connect=45.63.115.238

restart the client

if you want to add nodes in the conf file, the following nodes are active at this point

addnode=148.251.2.141
addnode=89.72.246.21
addnode=54.37.46.84
addnode=94.130.64.167
addnode=92.206.158.6
addnode=151.80.96.105
addnode=83.161.158.205
addnode=212.125.247.47
addnode=140.186.218.230
addnode=31.131.65.221
addnode=185.78.136.251
addnode=40.83.220.117
addnode=109.168.57.228
addnode=144.217.255.89

https://www.datacoin.tk/explorer/

if all else fail, try to reindex

create a short cut for your client and set the target

C:\.......\datacoin-qt.exe -reindex

start the client with the shortcut

Hamburger