 Show Posts
|
|
Pages: [1]
|
You can actually go 50 MHs+ on a vega 56 with Hynix. This one can go 52 MHs+ at 1090+ core. x x
xGPU: PCI 0000:0b:00, Radeon RX Vega 56 8.0 GB, BIOS: 113-376XL-UO2, Mem Info: Hynix HBM H5VR32ESM4H_REV1 x
x Clk: 991Mhz, P-State: 1, Mclk: 960Mhz, Pwr: 104W, FanSpeed: 76%, Volt: 0.812v, Temp: 44C, Junc Temp: 49C, Mem Temp: 59C x
x x
lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x--------------------- GPU Status ------------------------------------------- x
x[2020-05-02 06:49:25][info][miner/0]: [2020-05-02 06:49:23] GPU 0 [44C, fan 76%] ethash: 50.24Mh/s, avg 50.12Mh/s, pool 42.55Mh/s a:30 r:0 hw:0 x
x[2020-05-02 06:49:25][info][miner/0]: [2020-05-02 06:49:23] Total ethash: 50.24Mh/s, avg 50.12Mh/s, pool 42.55Mh/s a:30 r:0 hw:0 x
x[2020-05-02 06:49:25][info][miner/0]: [2020-05-02 06:49:23] ----------------------------------------- Pool Status ------------------------------------------ x
x[2020-05-02 06:49:25][info][miner/0]: [2020-05-02 06:49:23] us1-etc.ethermine.org ethash: 50.24Mh/s, avg 49.59Mh/s, pool 42.55Mh/s a:30 r:0 x
Impressive...full PPT+Timings you use please?!Drivers? |
|
|
|
AMD LINUX DRIVERS 20.1 ARE OUT--
These drivers may be downloaded from AMD. The drivers support all current RX series cards, including the RX 5600 series with the last-minute BIOS upgrade from AMD proper.
They may take some manipulation to install on Ubuntu 20.04. Ubuntu 20.04 has Linux kernel 5.4, and includes kernel-level support for the entire RX series of AMD GPUs.
--scryptr
I fully test 20.04 LTS Server, seems very stable and perform very well, install amdgpu-pro drivers was a pity...to resume: - amdgpu-pro-opencl-19.30/50 OK DKMS and some others dependencies NOT OK = can mine and overclock but i don't like "50/50 working modules in my distros" - amdgpu-pro-opencl-20.2.1 full drivers support + DKMS OK but shity hashrates expecially on ETH algos so rolled back to 18.04 LTS Server Just have to wait for devs to update miners, i'm worried about TRM devs...seems dead since 2 mounths or just busy! |
|
|
|
If you're lucky, you might find a Vega 64 vbios for that same card (if they made em both 56 & 64), which is unique.. not much out there, Pulse, only 56 afaik.
That however doesn't mean they're crappy, i've got a Sapphire Pulse with Hynix memory and it's running smooth at 47~Mh (memory at 975).
Got a Samsung Vega56 too and hits 48+Mh..
The thing is, they only have 6 SOC states, so it gets auto forced into a lower memory state (800MH), you can see this in the tool..
Vega 64 has 8 SOC states, therefor it goes to the highest memory state (1000Mh).
Can you explain this, i'm interested in getting this hasrates and also any optimizations for my wonderfull 56s Pulse nano watercooled??? What PPT/timing to use for "all-cryptos-round config" with Vega56-113-376XL-UO2-180315.rom More specifcly what timings for ETH? I'm ready to share all i have (PPT, Monitoring...) and i have a lot, so if you guys are interested... 975mem on our tinies nano pcb+hynix mem is that a joke? Just need to set to maximum "sclk 5" right?! My rocm-smi PPT, Ubuntu 18.04, AMDGPU-Pro 19.30:   I hit 42.6 with Hynix and 44.9 with samsung stock timing!  |
|
|
|
Hi guys, i wrote a beginners level, complete guide to install, configure, overclock and mine with amdgpu/cpu under Linux - Ubuntu Server LTS 18.04.4 !! Have a look and send me message if you have suggestions, corrections or just to say thanks! https://github.com/ArSd-g/AMDGPU-Mining-Ubuntu-18.04-LTS-Server-HWEAlso consider donation for my work! ETH: 0x691318ab130Bb4B82a521C59Cac60B417e003675 BTC: 3Ec5UjkZxXjM92s53U9w7SRQuhHEm7x2HH XMR: 4GdoN7NCTi8a5gZug7PrwZNKjvHFmKeV11L6pNJPgj5QNEHsN6eeX3DaAQFwZ1ufD4LYCZKArktt113 W7QjWvQ7CW9BZBGeRUR69Tp5AVj laarSn |
|
|
|
Thank you for the link! I can't believe it never came up before.
My pleasure  I cant get more than 1950 H/s Pulse 56 Stock Bios Samsung memory /Lucky Timing from config file (56-Hynix) @ 1407/905 Mem:950 13*13:AAA
That suck really.... ideas?
Before 0.5.0 = 2100H/S
Man... you all use so much power on your vegas. I have 1950h/s - 1990h/s with both the core and mem at 880mV (stock timings still, I don't have them that long yet. Still learning Vega )) The core powerdraw is avg 117W, with dips to 95W and spikes to 130W (Eth & CNr) The mem i can't get an accurate reading, not even with HWinfo. It is stuck at 1.2V without budging once, but changing the mV does have impact on stability and hashrate, so I'm sure it's not 1.2V) I ran several autotunes and used those configs ilovetrm As a sidenote. the list devices batfile recognizes all my 4x0 and 5x0 as 580's. Dunno if that's normal? And with autotune, my 4gb cards are faster than my 8gb cards. It's a mishmash of brands and memory brands tho.(no vega's in these rigs just fyi) (the MSI armor 470 8Gb Micron is just abysmal. Barely breaking 700h/s) Not changing the fact i get bewteen 100-200H/s more... Muuum i'm thinking that i didn't use timings before and 56 pulse is a nano PCB; do you think timings can screw up all of this? i'm using newly Minerstat OS exp. (18.04-19.10) flashing the stable version now...if it's not good ill back to *+* with stock timings and report here...antoher question i set up my mem voltage to 875-900-950 for a mem clock of 950 any advise? |
|
|
|
Thank you for the link! I can't believe it never came up before.
My pleasure I cant get more than 1950 H/s Pulse 56 Stock Bios Samsung memory /Lucky Timing from config file (56-Hynix) @ 1407/905 Mem:950 13*13:AAA
That suck really.... ideas?
Before 0.5.0 = 2100H/S
Man... you all use so much power on your vegas. I have 1950h/s - 1990h/s with both the core and mem at 880mV (stock timings still, I don't have them that long yet. Still learning Vega )) The core powerdraw is avg 117W, with dips to 95W and spikes to 130W (Eth & CNr) The mem i can't get an accurate reading, not even with HWinfo. It is stuck at 1.2V without budging once, but changing the mV does have impact on stability and hashrate, so I'm sure it's not 1.2V) I ran several autotunes and used those configs ilovetrm As a sidenote. the list devices batfile recognizes all my 4x0 and 5x0 as 580's. Dunno if that's normal? And with autotune, my 4gb cards are faster than my 8gb cards. It's a mishmash of brands and memory brands tho.(no vega's in these rigs just fyi) (the MSI armor 470 8Gb Micron is just abysmal. Barely breaking 700h/s) Not changing the fact i get bewteen 100-200H/s more... |
|
|
|
|
I cant get more than 1950 H/s Pulse 56 Stock Bios Samsung memory /Lucky Timing from config file (56-Hynix) @ 1407/905 Mem:950 13*13:AAA
That suck really.... ideas?
Before 0.5.0 = 2100H/S
|
|
|
|
|
Tried to send 0.00024 BTC to LTC to test....still not working!!!
|
|
|
|
|
Hi,
Auto exchange not working LTC or BTC for none of my coins, that's very frustrating, i have not time for this, fix this quick.
Before you ask; i have 0.10342767 XMR for exemple it's about 6.26€ now, so fairly enought to be exchanged....
|
|
|
|
Same here epic failure for r9 280 Dual-x (compute errors, 0 h/s, red everywhere, no need to ask drivers, oc, compute, lock memory pages all ok! i have a Vega 56 rig too doing better but still 100w more for V8 than V7 and 100h/s less...
)
i dont want to be disrespectful with your awesome work and support (really) but:
As you ask on your 1.7.0 release post: NO! WE DONT WANT USELESS EXTRA TUNING GADGETS to mine 10h/s more but screwing up 50% of our gpu's and all pasts benchmarks.
I mean of course if it's usefull, like very usefull i'm ok but:
i MINE : CryptoNight ,CryptoNightAlloy, CryptoNightArto, CryptoNightB2N, CryptoNightFast ,CryptoNightHaven ,CryptoNightHeavy ,CryptoNightItalo , CryptoNightLiteV7, CryptoNightSaber, CryptoNightStelliteV4, CryptoNightV7, CryptoNightV8 with a profitability switcher that i coded
if i need to bench (x8)²x508x48 possible settings/cards/algo on every release i'll rather to stop using a tool that will makes me spend more time to bench and set up than to mine ...
SO PLEASE YOUR PROGRAM IS GREAT!= new goodies or i dont know how do you call this (fragments, bralock, aes) and all these ****** settings which makes me pull my hairs off for 1 week to earn what: 10h/s or 0========E X I T !
very easy fix, use old version that good on r9 280 und problem solved my vega & rx rigs thank you for 1.7.0 doktor! I use minerstat switcher for this rig (this is my PC in fact...) which cannot reach old api requirements (which change on every release too).... API in SRB changed on every release? Hello ! Is it possible to set up a forcerestart windows 10 when the miner crash? Every miner crash I lost remote access (teamviewer, google remote) to the mining RIG and I need to acces physically to the rig for shutdown. Well if windows hangs then you can't do anything else but restart the machine physically. Maybe you should lower a little bit your overclocking settings so it won't hang ? I tried but my Vega ( 56 reference blower) are already running at low speed 1395 / 925 . Miner crash every couples of days (5-6) , there is only 1-2 compute error per card after one week running. I don't know how to identify the bad one. No i'm wrong (fast answer... i was deleting my post.sorry..) just minerstat default value didn't match with the new/old 1.6.8 "(- API parameters now have to be set in start.bat (--apienable, --apiport, --apirigname) , removed them from config.txt)" I use 1.6.8 for r9 280 dx, i need to check when minerstat auto-update miners to force it to roll back/downgrade....it's ok for a 10€/month miner not for my 3x6 Vega 56 (Sapphire Pulse 56 nano PCB which are amazing...btw!) 1.7.0 for my 56s running ok with default settings, it seems to draw less power than 1.6.9 and prev' <=1.6.9 :220w of the wall OC 1508/950 Cv8 2000H/s 1.7.0 :190w; gpu-z says 130w/150w= 2000H/s Cv8. (Cv7= 2100H/S) This my settings if some people want to share there values for general improvement this is mine: (suggestion; add a page on SRBMiner site to compare best settings/card/model/SRBMiner Version, looking for a precise information on this forum is sometimes ...tricky! exemple: XMRStak - https://www.xmrstak.com/category/xmr-stak-amd-configurations/amd-vega-56/) - Windows 10 Business 1809 November - Lock pages - NordVpn - u/hellae .Reg PPT - Windows Optimizer https://github.com/hellzerg/optimizer/releases- Sapphire RX Vega 56 Pulse Stock Bios HBM2 off @ P7:1508/1000, P3: 950/905, Samsung Memory, 160w-180w/card (of the wall) - SRBMiner 1.7.0 multi pool/algos - MinerStat Profit Switcher Windows Hashrates (Stock config files: I=0 T=2): heavy/haven : 1750 H/s bittubev2 (saber) : 1650 H/s italo : 1700 H/s v7/stellitev7 : 2060 H/s v8: 1950 H/s fast : 3950 H/s lite/litev7 : 4450 H/s alloy : 1050 H/s artocash : 1610 H/s marketcash : 2710 H/s questions? comments?! , improvements?! , your settings (I, W, F, A).... @ Doktor83: i apologize, i have been disrespectful with your work (even if i didn't want to be)! sorry again. you do an awesome job with this tool which is my favorite since quite a while...keep going dude! There is a DOC maintained by users here : https://docs.google.com/spreadsheets/d/1pH326fwnYWC5Jef2FdF4KnJ4CLj0cwDDtGjrlgekk1A/edit#gid=514064850 it contains settings for various cards. It can be found on the first page , under the Tips section. No problem i got used to angry people  What is really making me confused sometimes is that some complain on XY gpu new version is a lot worse, while others for that same XY gpu say the new version is a lot better. I know something got 'lost' for older cards on the road, in the next version i will again add a 'useless extra tuning gadget', which will maybe bring back what got lost for those older cards. yeah angry people in a angry "beautiful" world (sense?!!!) .... fact is f*** windows 10 of s***** likes to make jokes: i used to experiment (when i was a cryptominer kid ) some services, user assignments, regedit, drivers, UEFI access related to storage/pci-e, -- inherents, non-logicals, "can't be" errors...(we are not talking about stock bios /brand programming, OC, risers, dual PSUs ((server(Gpu+Riser)/pc(MB)) wired together with floppy port) and all hardware/software config yet  ) What i remember: - Clean hardware installation and bios settings (for exemple: DO NOT assign and boot on dGPU but on igpu; i can read this bullshit everywhere! i work with TB250 BTC and trust me that's a mess!) - Very clean, step by step Windows 10 installation and set up (for exemple: W10Pro no often the best one, i recommend business or workstation ; i use in order (if it can help) : 1 W10 Updates, 2 Activation script, 3 Lock pages in memory, Pcie-e Power link and HDD settings, 4 Iobit drivers booster (uncheck dgpu), 5 Reboot, 6 AMD Drivers Andrenalin 18.6.1, 7 Reboot, 8 Optimizer 4.5 (check all), 9 Reboot 10 Add PPT .reg file and crossfire/ulps off, 11 Resetvega+overdriventool homemade script with compute mode, 12 Reboot, 13 IOBIT Advanced System Care full clean up and optimisation, 13 Reboot 14 Scan with anti-malware then uninstall (i use IOBIT Malware Fighter of course! ) 15 Install Nord Vpn 16 Reboot 17 Download and install miner (check and tune access to .exe (admin?!, user assignments, owner of the partition.ONLY IF SOMETHING MESS UP when start mining..) 18 Tune miner settings 19 Reboot 20 set up "auto boot" in bios (scheduled + AC power loss) 21 set up auto-start script for miners for windows when system boot up 22 breathe, eat, fuck, sleep! 23 code a profit switcher script https://github.com/autominer/autominer or use Minerstat https://minerstat.com (sorry some advert here but simply THE BEAST, THE BEST, THE MORE EFFICIENT, WELL CODED, USER FRIENDLY, AWESOME and very COOL SUPPORT app, yeaaahh i'm in love! yééé im good timing 23 23 23 23 - https://youtu.be/xfE3EVaSqtk Writing all of this i was wondering if the recent AMD Gpu Pro 18.30/RocM in Linux 18.04 brings finally a chance to reach sames hashrates as windows?! What do you think about this? implement a Linux version should be THE solution to brake with "angry people" and they "gadgets related" stupid questions?! Thinking about SRBMiner Linux? not at all? maybe? yes of course here is the link?! Sorry for my english as you can read only a french guy can screw up eng language like this |
|
|
|
Same here epic failure for r9 280 Dual-x (compute errors, 0 h/s, red everywhere, no need to ask drivers, oc, compute, lock memory pages all ok! i have a Vega 56 rig too doing better but still 100w more for V8 than V7 and 100h/s less...
)
i dont want to be disrespectful with your awesome work and support (really) but:
As you ask on your 1.7.0 release post: NO! WE DONT WANT USELESS EXTRA TUNING GADGETS to mine 10h/s more but screwing up 50% of our gpu's and all pasts benchmarks.
I mean of course if it's usefull, like very usefull i'm ok but:
i MINE : CryptoNight ,CryptoNightAlloy, CryptoNightArto, CryptoNightB2N, CryptoNightFast ,CryptoNightHaven ,CryptoNightHeavy ,CryptoNightItalo , CryptoNightLiteV7, CryptoNightSaber, CryptoNightStelliteV4, CryptoNightV7, CryptoNightV8 with a profitability switcher that i coded
if i need to bench (x8)²x508x48 possible settings/cards/algo on every release i'll rather to stop using a tool that will makes me spend more time to bench and set up than to mine ...
SO PLEASE YOUR PROGRAM IS GREAT!= new goodies or i dont know how do you call this (fragments, bralock, aes) and all these ****** settings which makes me pull my hairs off for 1 week to earn what: 10h/s or 0========E X I T !
very easy fix, use old version that good on r9 280 und problem solved my vega & rx rigs thank you for 1.7.0 doktor! I use minerstat switcher for this rig (this is my PC in fact...) which cannot reach old api requirements (which change on every release too).... API in SRB changed on every release? Hello ! Is it possible to set up a forcerestart windows 10 when the miner crash? Every miner crash I lost remote access (teamviewer, google remote) to the mining RIG and I need to acces physically to the rig for shutdown. Well if windows hangs then you can't do anything else but restart the machine physically. Maybe you should lower a little bit your overclocking settings so it won't hang ? I tried but my Vega ( 56 reference blower) are already running at low speed 1395 / 925 . Miner crash every couples of days (5-6) , there is only 1-2 compute error per card after one week running. I don't know how to identify the bad one. No i'm wrong (fast answer... i was deleting my post.sorry..) just minerstat default value didn't match with the new/old 1.6.8 "(- API parameters now have to be set in start.bat (--apienable, --apiport, --apirigname) , removed them from config.txt)" I use 1.6.8 for r9 280 dx, i need to check when minerstat auto-update miners to force it to roll back/downgrade....it's ok for a 10€/month miner not for my 3x6 Vega 56 (Sapphire Pulse 56 nano PCB which are amazing...btw!) 1.7.0 for my 56s running ok with default settings, it seems to draw less power than 1.6.9 and prev' <=1.6.9 :220w of the wall OC 1508/950 Cv8 2000H/s 1.7.0 :190w; gpu-z says 130w/150w= 2000H/s Cv8. (Cv7= 2100H/S) This my settings if some people want to share there values for general improvement this is mine: (suggestion; add a page on SRBMiner site to compare best settings/card/model/SRBMiner Version, looking for a precise information on this forum is sometimes ...tricky! exemple: XMRStak - https://www.xmrstak.com/category/xmr-stak-amd-configurations/amd-vega-56/) - Windows 10 Business 1809 November - Lock pages - NordVpn - u/hellae .Reg PPT - Windows Optimizer https://github.com/hellzerg/optimizer/releases- Sapphire RX Vega 56 Pulse Stock Bios HBM2 off @ P7:1508/1000, P3: 950/905, Samsung Memory, 160w-180w/card (of the wall) - SRBMiner 1.7.0 multi pool/algos - MinerStat Profit Switcher Windows Hashrates (Stock config files: I=0 T=2): heavy/haven : 1750 H/s bittubev2 (saber) : 1650 H/s italo : 1700 H/s v7/stellitev7 : 2060 H/s v8: 1950 H/s fast : 3950 H/s lite/litev7 : 4450 H/s alloy : 1050 H/s artocash : 1610 H/s marketcash : 2710 H/s questions? comments?! , improvements?! , your settings (I, W, F, A).... @ Doktor83: i apologize, i have been disrespectful with your work (even if i didn't want to be)! sorry again. you do an awesome job with this tool which is my favorite since quite a while...keep going dude! |
|
|
|
Same here epic failure for r9 280 Dual-x (compute errors, 0 h/s, red everywhere, no need to ask drivers, oc, compute, lock memory pages all ok! i have a Vega 56 rig too doing better but still 100w more for V8 than V7 and 100h/s less...
)
i dont want to be disrespectful with your awesome work and support (really) but:
As you ask on your 1.7.0 release post: NO! WE DONT WANT USELESS EXTRA TUNING GADGETS to mine 10h/s more but screwing up 50% of our gpu's and all pasts benchmarks.
I mean of course if it's usefull, like very usefull i'm ok but:
i MINE : CryptoNight ,CryptoNightAlloy, CryptoNightArto, CryptoNightB2N, CryptoNightFast ,CryptoNightHaven ,CryptoNightHeavy ,CryptoNightItalo , CryptoNightLiteV7, CryptoNightSaber, CryptoNightStelliteV4, CryptoNightV7, CryptoNightV8 with a profitability switcher that i coded
if i need to bench (x8)²x508x48 possible settings/cards/algo on every release i'll rather to stop using a tool that will makes me spend more time to bench and set up than to mine ...
SO PLEASE YOUR PROGRAM IS GREAT!= new goodies or i dont know how do you call this (fragments, bralock, aes) and all these ****** settings which makes me pull my hairs off for 1 week to earn what: 10h/s or 0========E X I T !
very easy fix, use old version that good on r9 280 und problem solved my vega & rx rigs thank you for 1.7.0 doktor! I use minerstat switcher for this rig (this is my PC in fact...) which cannot reach old api requirements (which change on every release too).... |
|
|
|
distinguished developer
one question
do you still support old pitcairn video cards ?
After the test of your latest version 1.7.0 I am at a loss?
srb 1.6.9 pitcairn 370 2 gb stelite v4 --- 485h / s
srb 1.7.0 ---- 226h / s
total failure
Hi i got less hashes with 1.7.0 on my tahiti too. Can you share your 1.6.9 miner settings for pitcairn? Thank you. Need more info, like is it stellite only or EVERY algo? same settings? what have you tried beside running new version with old config ? I dont have every possible gpu to try out when coding, sometimes what pushes one card, takes off another, so dont be immediately mad bros  Absolutely no complaints, just results. In my case, for tahiti the most productive version is still 1.6.8, 1.6.9 is a little slower, 1.7.0 much slower. ( same settings, algo v8) which card specifically, and what was the hashrate on 1.6.8 and what it is on 1.7.0 ? I want to try to fix this issue. Same here epic failure for r9 280 Dual-x (compute errors, 0 h/s, red everywhere, no need to ask drivers, oc, compute, lock memory pages all ok! i have a Vega 56 rig too doing better but still 100w more for V8 than V7 and 100h/s less... ) i dont want to be disrespectful with your awesome work and support (really) but: As you ask on your 1.7.0 release post: NO! WE DONT WANT USELESS EXTRA TUNING GADGETS to mine 10h/s more but screwing up 50% of our gpu's and all pasts benchmarks. I mean of course if it's usefull, like very usefull i'm ok but: i MINE : CryptoNight ,CryptoNightAlloy, CryptoNightArto, CryptoNightB2N, CryptoNightFast ,CryptoNightHaven ,CryptoNightHeavy ,CryptoNightItalo , CryptoNightLiteV7, CryptoNightSaber, CryptoNightStelliteV4, CryptoNightV7, CryptoNightV8 with a profitability switcher that i coded if i need to bench (x8)²x508x48 possible settings/cards/algo on every release i'll rather to stop using a tool that will makes me spend more time to bench and set up than to mine ... SO PLEASE YOUR PROGRAM IS GREAT!= new goodies or i dont know how do you call this (fragments, bralock, aes) and all these ****** settings which makes me pull my hairs off for 1 week to earn what: 10h/s or 0========E X I T ! |
|
|
|
hi i get an app "check profitability" freeze/crash on: code: Cancelled profit task 3. Each times i restart on a different coin but always seems to stuck and stop! sometimes it passes (1/5 approx.) and: MineCryptonightApi not working (i'm interested by LTHN profitability check...) only one message returns: Failed to get profits data from MineCryptonight Api: The specified key 'cryptonight-lite-tube_factor' does not exist in the ExpandoObject. Wonderfull app...when it's working Please solution or fix!!! Screen:  |
|
|
|
I have 5 vega56 Adrenalin 18.6.1
3 gfx 900 give by 1850 ~
2 gfx 901 give 1000 ~
what is the problem?
why my vega 901 give 1000 h/s Vega 900 1800 h/s How to raise hashrate on 901? If you are using the binary kernels try to rename that folder and let the miner compile it again. hi same here: not working for me: vega 901 give 1200 vega 900 give 1200 ? Same for me help plz (tip is to disable hbcc but it also low my hasrate when switching to other algos (haven,alloy...) SRBMiner 1.6.8 AMD 18.6.1 Vega 56(stock-bios) Pulse (nano-PCb sapphire a f**** beast!) @ 1547 950 Cnv7:HBCC-on:2050H/s Intensity 120 Worksize 8 Cnv8:HBCC-off:1950H/s Cnv8:HBCC-on:1000-1200H/s Intensity 120 Worksize 16 Solution please to keep HBCC on with normalv8 without a **** 1000H/s Vega 56!!! What is the diffrence between gfx900 and gfx901 -> (900)vega 56 & (901)vega 64 ?! |
|
|
|
|
SRBMiner 1.6.8 AMD 16.1 Vega 56(stock-bios) Pulse @ 1547 950
Cnv7:HBCC-on:2050H/s
Intensity 120 Worksize 8
Cnv8:HBCC-off:1950H/s
Cnv8:HBCC-on:1200H/s
Intensity 120 Worksize 16
Comments?! what am i missing?
|
|
|
|
|
hi i m trying to set up a multi-algo switching (Monero Ocean+ Miner2gether (XAO)
i set these 2 pools in pools-algo-switching with cryptonight_type option by pool
when i run miner it restart switching in loop cryptonightv7-->another MO currency-->cryptonight_V7-->another currency again and again with no mining
help plz
*SRBMiner 1.6.8
|
|
|
|
|
