Latest posts of: tytanick

Quote from: thedreamer on February 06, 2020, 08:59:13 PM

When i remove the rx5700, everything mines as normal.
I'm using claymore, but its not even trying to mine on the others when the 5700 is plugged in.

Tried different pcie plug and even with less gpus. No difference.

Check this out:
https://download.simplemining.net/photos/2020-02-06_22-27-54.png

Please try using phoenix miner.
I think that claymore is the problem.

Quote from: thedreamer on February 06, 2020, 04:08:26 AM

Ok, Tried it. The new image works fine with the rx500 series and rx400 series GPU's but when an rx5700 is installed, it only detects the rx5700 and none of the other gpu's.
Hashes fine on the rx5700. Weird.

Can You try phoenixminer and claymore as well ?

What do you mean by detects only RX500. Does the miner sees only one of them or our system sees one of two cards in RigDetailed View ?
It would be great if you will write to us at admin@simplemining.net so we could login to your rig and check exactly how system sees those GPUs.
Can you leave one rig with both cards and tell us which is it (every info via email).

We tested this and miner was mining on both but cliinfo showed only RX5700.

Miners update:
- bminer-v16.0.4 (Improve the performance of Cuckaroo29m. Reduce the rejection rate of the Cuckaroo29m)

Quote from: thedreamer on February 05, 2020, 08:15:38 PM

Quote from: tytanick on February 05, 2020, 05:41:01 PM

Yes, why not ?
Use image from RX5700 but the RX500 will be a little bit slower.

I downloaded the latest image and when I run it on a rig with 9x 4/5xx GPU's and one RX 5700, it ONLY sees the RX 5700 and runs that. No other GPUs are found.

And when you unplux RX5700 then it sees those RX400/500 ?

We will check that

Yes, why not ?
Use image from RX5700 but the RX500 will be a little bit slower.

Quote from: BogdanCo on February 04, 2020, 08:27:38 PM

Quote from: tytanick on February 04, 2020, 11:32:32 AM

SimpleMiningOS images update:
- New image 5.0.21-9-a19.50-n440.44 with fixed Vega slower hashrate in the previous image release.

Now it's working

Thanks for the update. I see a slight rash rate improvement for Vega. ~1Mh/s for a 6 card rig. Nice!

OK fine.
We have still some bug with RX5500 that shows wrong core MHz (but it is working fine beside that)
Thx for info Bogdan.

SimpleMiningOS images update:
- New image 5.0.21-9-a19.50-n440.44 with fixed Vega slower hashrate in the previous image release.

Rig update v1261:
- added API for miner ccminer-monkin1010-vega (veruscoin)
- reduced Hashrate column content from max 2 to only 1 line for clarity
- fixed miner pause message in console after reload/upgrade/reboot actions
- simplified messages of states: pause/power off/asleep/pause

Miners update:
- xmrig-v5.5.3 (Fixed crash on Bulldozer CPUs)

Miners update:
- xmrig-v5.5.2 (Removed unnecessary code from RandomX JIT compiler. Optimizations for AMD Bulldozer. Added support for BMI2 instructions. Optimized CFROUND instruction for RandomX. Fixed thread affinity)

Probably on monday we will fix this "slower thing" problem

Thx for heads up guys !
We tested this only on RX5700 but we will check whats wrong with the VEGA's.
There is not need to reflash other systems if they are working fine.
Ofcourse you can test other images and check performance

Also one more thing, i added old flashing image and made some text cleanups - also i removed the warning notice as it is very stable process

If this process fails then it is only due to bad pendrive or power outtage. All tries of reflashing process are success

The linux driver say tha 7000MHz is the max and nothing more is working. Thats it.
Why i have no Fkng idea Cheesy

Is it mining he same speed as in windows ?
In linux the memory clock is little different than windows so it might be the same hashing speed but different mem value Huh

SimpleMiningOS images update:
- New image 5.0.21-8-a19.50-n440.44 with fixed Navi support - AMD RX 5500/5700. Image contains new drivers that solves zero percent fans speed and cards disappearing with some manufacturers
- Users with Navi cards are required to reflash manually rigs by downloading new image or using Advanced Commands via Dashboard to have fully new Navi functionality.

Quote from: Zavory on January 30, 2020, 11:35:09 PM

Does Simplemining store any non-volatile configuration on GPUs (such as modified BIOS for overclocking)?

If I want to do use my rig part-time for Simplemining and part-time for something else (e.g. GIMPS),
do I have to change back all overclocking settings to manufacturer values each time before removing Simplemining USB?

Quote from: btcltcdigger on December 18, 2019, 02:53:10 PM

I love SMOS

Absolutely!! Cool

You mean you do not want to write different BIOS to those GPUS ?
Then using normal overclocking modal in simplemining will not write anything to GPU.
Those values are in OS memory.
You will only not get full OC possibilities as the memory timings will not be best.
Still you can dig into amdmemorytweak and use Advanced overclocking to write your own timings - that also will not replace anything on GPU itself

So you do not need to change OC settings, rebooting PC will reset all OC.

Quote from: Wotan Wipeout on January 30, 2020, 06:25:01 PM

Thx for the fast answer. I understand your point and will stay to btc /eth ... payment.
I wouldnt accept paypal if i were you. Too much trouble.

Mail will be sent tomorrow with pics with max ram clock on windows and simplemining.

Greetings

Yeah..... i've been using them for past 3 years for selling my SRR devices.....
They even blocked my funds for half a year as they thought i am some kind of bitcoin scam .....
Still Paypal is something that few people could use if they are starting and do not have any ETH/ETC yet.....
And i do not want to colect any credit cards data from my users.

Quote from: Wotan Wipeout on January 30, 2020, 04:33:10 PM

Hi there,

I am using your fine OS more than a year and you do really well. THX!

Could you accept a few more coins for payment pls? BEAM and XZC are my favourites.

I am running 1060s / 1070s / 1080s / 1080tis and 2080s, so i think i know what i do.

Could you pls check the 2080? Its not possible to go over 7000 in the RAM OC.
I wrote this before and was in contact with 1 of your team. But he didnt know what he did.
(he set the pill for the 2080 and we know thats bullxxxx because the pill is for DDR5X and not DDR6)
Because of this reason i ask you to check this - here again.

We can check what is the max mem OC possible on your card.
Please write me email to admin@simplemining.net and i will check that and verify.

Also about addonitional currencies - i do not wat to do that as more coins = more mess for maintaining this

Honestly i would add new coinn only if it will be like bitcoin or ethereum.
In other cases it is too much trouble.
I will think about adding PayPal in future (but they want about 5% fee mother.....)

Dashboard update
- you can now click on values in first summary block to instantly search problematic rigs (missing/too hot gpus, online/offline/paused rigs)
- 10 minute graph was useless - we replaced it with 30 min graph
- redesigned start page to look a little less crappy

Miners update:
- bminer-v16.0.3 (Improve performance and stability of the Cuckaroo29m. Fix fidelity issues of the Cuckaroo29m)
- miniz-v1.5t (Major improvements: 150,5 and 210,9 - up to 4% depending on algo and GPU. For RTX 2070 - up to 8% on 192,7). Minor improvements in all other algos - up to 2%. Better support for GTX 1660 Ti and GTX 1070. Improved stability. Fixed telemetry on Chrome browser. Cleaner program exit/termination. Added --color and --fee-time to command line options. Other minor fixes)

Miners update:
- lolminer-v0.9.7 (Increased GRIN-C32 performance on Vega, VII, Navi cards by 15-18%. Added a Grin Auto profit switcher)