Hi PhantonPhreak/Xnova

With reference to the Counterparty API, is there a way to set it up so that It accepts request from non local IP (external public IP)

Cheers

Hi

I think was one of the first to receive the actual sample unit and when I got it there were still no downloads available from the http://support.dualminer.com site. However, shortly after posting on the forums I was informed that the custom built cgminer was available for download.

Once that was available I got this setup and running as per the instructions available at http://support.dualminer.com

Below are some pics ..

Picture of the package received. This was shipped directly from TNT china. I believe for those us in ASIA the packages were sent directly from China



The miner was wrapped in foam sheets



The actual miner



I first did a test running with the DIP switch set just to mine at LTC mode. As advertised this ran around 70Kh and they match up with what is reported by the pool



I then did a second test running with the DIP switch set to mine in the hybrid BTC/LTC mode. When set to run in this mode 2 instances of the custom cgminer built is executed. One for BTC mining and the other for LTC. The speeds are similar to what was advertised and they roughly match up with what is reported by the pool





Other observations and remarks:

1. Test environment was an old dell laptop running Windows 7 32 bit

2. The unit was somewhat warm to touch and if running more than few units I would definitely prefer to run this with some sort of active cooling (i.e a simple fan blowing over the units)

3. I initially had issues getting it to run in the Hybrid mode when running this directly from the laptop's USB port. But once I had this on a powered hub there were no issues.

4. While  I have no comments on the ROI, the packaging and casing was nice and personally I think these would make nice gifts

Where can we download this special version of cgminer?

Cheers

Just a quick note to say I have received the dual miner today and will be doing a review once I have everything setup and running

Cheers

I was not aware you could do anything directly from https://masterchest.info too unless I am mistaken ?

Cheers

You can already access a basic live orders list from http://blockscan.com/order.aspx

Cheers

Yes, there is always a risk that the value could be zero or at the very least below your purchase price... Only time will tell.

And the risk increases exponentially when you have more people burning coins solely for the sake of profiting    

Given the large amount of liquidity I would personally not expect any kind of immediate price rally (i.e ala NXT or Mastercoin style) nor extensive price manipulation due to the float.

Cheers

You need at least 1 confirmed Bitcoin block for the balance to appear in Counterparty (and BlockScan).

While I have not personally used his service, if you have any reservations on burning XCP maxmint offers a burning service that takes the risk of an incorrect burn

Cheers

Thanks for the tip!

Looks like there was another bug with the blocks.py code. I've pulled the latest git and it looks like we are good to go again

You will need to export your private keys from blockchain and import them to your local bitcoinQT instance running along side with counterparty. And then issue the necessary (send, etc) commands from the counterparty client

Cheers

I can add this to the front page of blockscan if you think this would help ?

Out of curiosity how many assets did you "pre-book" ?   

I noticed a bunch of same addresses hitting the assets.

On a side note: You need to be running python 3.2 on windows and rebuild from source again. The 3.3 won't work.

Cheers

Same here. I have been invited for a review and will post an update once I receive the actual unit

Cheers

Yea 

But unlike domain names you have to transfer your private key over. And I doubt that anyone is going to trust someone to just hand over the private keys without keeping a copy. Lolz...

Well, lets see how this plays out.

Those are actually good suggestions.. I have updated the site with your suggestions and fixed the dividend issue

My donation address is 1bLockjTFXuSENM8fGdfNUaWqiM4GPe7V

Thank you.  If you have any additional comments or suggestions please feel free to post them here.

If you would like to donate please do so by donating directly to the XCP project developers via the donation address at 12J1YFvsWHDCU5HNAWNLNy1Q9nZo8Q4Xgs

https://bitcointalk.org/index.php?topic=395761.0

Hi

Ok. I've managed to build the latest release and we are back up again.

On a side note, I am also working on some new features not available in other block explorers and should have this up soon 

PS: Thank you xnova

Cheers

No go under windows for both python 3.2 and 3.3. Has anyone actually got these to work on windows?

--------------------
 File "C:\counterpartyd_build\env\lib\site-packages\cherrypy\_cprequest.py", line 656, in respond
   response.body = self.handler()
 File "C:\counterpartyd_build\env\lib\site-packages\cherrypy\lib\encoding.py", line 188, in __call__
   self.body = self.oldhandler(*args, **kwargs)
 File "C:\counterpartyd_build\env\lib\site-packages\cherrypy\lib\jsontools.py", line 61, in json_handler
   value = cherrypy.serving.request._json_inner_handler(*args, **kwargs)
 File "C:\counterpartyd_build\env\lib\site-packages\cherrypy\_cpdispatch.py", line 34, in __call__
   return self.callable(*self.args, **self.kwargs)
 File "C:\counterpartyd_build\dist\counterpartyd\lib\api.py", line 235, in index
   data = cherrypy.request.body.read().decode('utf-8')
 File "C:\counterpartyd_build\env\lib\site-packages\cherrypy\_cpreqbody.py", line 455, in read
   return self.fp.read(size, fp_out)
ypeError: read() takes at most 2 positional arguments (3 given)
....
Traceback (most recent call last):
  File "C:\counterpartyd_build\dist\counterpartyd\counterpartyd.py", line 625, in <module>
    blocks.follow(db)
  File "C:\counterpartyd_build\dist\counterpartyd\lib\blocks.py", line 453, in follow
    block_count = bitcoin.rpc('getblockcount', [])
  File "C:\counterpartyd_build\dist\counterpartyd\lib\bitcoin.py", line 60, in rpc
    response_json = response.json()
  File "C:\counterpartyd_build\env\lib\site-packages\requests\models.py", line 733, in json
    return json.loads(self.text, **kwargs)
  File "C:\Python32\Lib\json\__init__.py", line 319, in loads
    return _default_decoder.decode(s)
  File "C:\Python32\Lib\json\decoder.py", line 353, in decode
    obj, end = self.raw_decode(s, idx=_w(s, 0).end())
  File "C:\Python32\Lib\json\decoder.py", line 371, in raw_decode
    raise ValueError("No JSON object could be decoded")
ValueError: No JSON object could be decoded

Yes. It still good for checking the old burns