Zecminer64.exe = virus?
Kaspersky said...
Any ideas?
I don't trust Kaspersky but neither Zecminer64.exe seems legit, why not to check it with other antivirus ? or even with malwarebytes ? Is there any chance to make miner mine on two pools like Claymore takes his DEV fee by mining for himself ? I mean to make miner mine like 3 minutes every hour for other worker ? |
|
|
|
after updating to V8 since the release day only three rigs out of 84 has the problem Watchdog: GPU 0 hangs in OpenCL call, exit and after that Reset control for GPU 0 ... and miner stops and hangs the PC in V7 there wasn't a problem like this any solutions ? Use -wd 0 When that GPU dies, you need to manually restart computer before re-running the miner. So far so good with -wd 0 also I wonder is it mandatory to set 16gb virtual memory ? No idea but most of us have like 500gb of free hard drive space so why not. That will be a huge issue for my, most of my SSDs are 16 and 32Gb.. One of three did the same hangs opencl call other two are working fine so far With -i4 each GPU uses like 1.5GB. so you need at least that amount of virtual memory. If you don't have enough virtual memory, the hashing will fail to start. The GPU 0 hang is something else. after setting wd to 0 I also did i to 0 too lets see what will happen |
|
|
|
after updating to V8 since the release day only three rigs out of 84 has the problem Watchdog: GPU 0 hangs in OpenCL call, exit and after that Reset control for GPU 0 ... and miner stops and hangs the PC in V7 there wasn't a problem like this any solutions ? Use -wd 0 When that GPU dies, you need to manually restart computer before re-running the miner. So far so good with -wd 0 also I wonder is it mandatory to set 16gb virtual memory ? No idea but most of us have like 500gb of free hard drive space so why not. That will be a huge issue for my, most of my SSDs are 16 and 32Gb.. One of three did the same hangs opencl call other two are working fine so far |
|
|
|
after updating to V8 since the release day only three rigs out of 84 has the problem Watchdog: GPU 0 hangs in OpenCL call, exit and after that Reset control for GPU 0 ... and miner stops and hangs the PC in V7 there wasn't a problem like this any solutions ? Use -wd 0 When that GPU dies, you need to manually restart computer before re-running the miner. So far so good with -wd 0 also I wonder is it mandatory to set 16gb virtual memory ? |
|
|
|
after updating to V8 since the release day only three rigs out of 84 has the problem Watchdog: GPU 0 hangs in OpenCL call, exit and after that Reset control for GPU 0 ... and miner stops and hangs the PC in V7 there wasn't a problem like this any solutions ? |
|
|
|
|
what coins can it mine? or is there any chart to see it myself?
|
|
|
|
having problem with my RX 480X 8gb i cant run it at 200 sol  I'm not even geting 180/s on RX480 8G |
|
|
|
anyone messed with clock and memory on RX480 8G? Max I can get is 190/s on reference ones
GPU clock @1400 should push past 200 sol/s What are you using to change your gpu clock on your RX 480s? Each time I change mine with afterburner, it immediately freezes and i have to hard reboot. Any screenshots would be great! I use wattman tool it came with driver |
|
|
|
socket send failed <<<  |
|
|
|
anyone messed with clock and memory on RX480 8G? Max I can get is 190/s on reference ones
GPU clock @1400 should push past 200 sol/s Ill try it out |
|
|
|
|
anyone messed with clock and memory on RX480 8G? Max I can get is 190/s on reference ones
|
|
|
|
|
Received the coin today, just couple minutes ago [Georgia, Tbilisi]
Thanks
Edited:
it includes free coins ?
|
|
|
|
Guys, can you tell me what is the average life of a rig which is on 24/7? Some of my fans are dead after 3 months, so it is clear that they will be all dead in 2 years tops. But what about the psu's, mobos and video cards? Can I expect them to work 3 or 4 years with the Claymore miners? I am asking this because if the profits drop again (like 0.20$ per day for 280x before the Zec launch), I will not be able to return my investment in near future.
I think it mostly depends on environment, dust and temperature. In my case in 4 month period I burned down only one ref RX480 out of 270, fans working great, a bit dusty inside but cleaning them regularly expands the lifetime How long have you had your 480's? From the beginning of August |
|
|
|
Guys, can you tell me what is the average life of a rig which is on 24/7? Some of my fans are dead after 3 months, so it is clear that they will be all dead in 2 years tops. But what about the psu's, mobos and video cards? Can I expect them to work 3 or 4 years with the Claymore miners? I am asking this because if the profits drop again (like 0.20$ per day for 280x before the Zec launch), I will not be able to return my investment in near future.
I think it mostly depends on environment, dust and temperature. In my case in 4 month period I burned down only one ref RX480 out of 270, fans working great, a bit dusty inside but cleaning them regularly expands the lifetime |
|
|
|
Anyone know if it's possible to run the binary in Ubuntu (with say, WINE)?
That would be a terrible idea. You will have to wait until Claymore releases a Linux version or dual boot Windows. Bummer. I'd personally love a Linux version to be able to make Docker containers and easily manage the machines. But okay. Is a linux version something we can expect, or is it not really on the priority list? No zec miner for linux and nvidia cards as far as I know |
|
|
|
გამარჯობა, კიდევ აქტიურია ეს ტოპიკი?
ვაფიქსირებ დღევანდელ ბიტკოინის ფასს: $725.28
რათქმაუნდა არის  მე ისევ აქ ვარ ვაა ძალიან კარგი რითი ხარ დაკავებული ? მაინინგი ? ტრეიდინგი ? |
|
|
|
Dear Claymore
I tried restarting miners via remote manager and instead of restarting they just shut down, is it a bug or am I doing something wrong ?
I use remote manager with no issues.. how's your setup? usual, no port change, nothing specific 65 ZEC rigs and on every rig the same, I use view miner console and config edit also they work great. On ETH rigs everything working fine |
|
|
|
|
Dear Claymore
I tried restarting miners via remote manager and instead of restarting they just shut down, is it a bug or am I doing something wrong ?
|
|
|
|
|
Show Posts
