It's been quiet around here for the past couple of days. The trading on Cryptopia has been picking up nicely.  |
|
|
|
Whats with the newbies trying to impersonate devs account name? Hilarious  Still developing this coin? Btw how is it still unique with pools present? This is an EXTREMELY old question/argument that is answered in this thread many, many times. Ocminer has a way through a private miner to allow you to mine on his pool however it is a trust/trust relationship. Mine at your own risk. With that said, I like Suprnova pools very much and have never had any problems mining his/her pools. Cool, I guess it should be added to OP then. I like suprnova pools as well, but this kind of shows there is a way around the main principle. On the other hand no hash reported at the pool anyway. Yeah I've stopped the pool as there were no miners interested in mining for quite some time. I can reopen it of course if needed So I have tried to contact ocminer through PM and directly through his suprnova.cc website and for whatever reason I'm not important enough to get a response from him. I am asking if anyone knows where to get the suprnova spreadminer so that people can mine on the suprnova pool for spreadcoin. I used to have the special miner needed to mine on the pool but that was a while back and I no longer have the suprnova spreadminer on my computer. A link to the special miner used be be posted on the getting started page but it is no longer there. I saw your PM but couldn't reply yet, sorry, the old github account with the spread stuff got deleted and I don't have the sources of the miner anymore, I need to look through my backups and find it, I wasn't expecting anyone wanting to mine this coin again after all these years. However nethash is very low, you can just solo-mine and you'll be fine. Oh, ok. If you are able to find those backups that would be awesome. I did find a link to the sources in this very ANN because I went through every page trying to find a link to the actual miner, I'll will go back through and link all the sources that you linked back in the day. Those are very likely the old, unoptimized versions then.. In the meanwhile the miners (sp-mod) are much, much (30-40% faster) yeah, these are all from 2 years ago... The sourcecode is available for everyone here: https://github.com/ocminer/ccminer-spreadcoin-pool-publicYeah, thats the ultra-old version. It works but it's super-slow, I'll try to find the newer versions when I have some time, in the meanwhile I'd recommend going solo - nethash is still very low, you'll find blocks solo too. Yeah I went solo earlier today, but with the recent price increase the nethash is up to 2GH and my 2 GTX 980s only put out 11MH (5.5MH each)... I found 2 blocks in 10 hours, wayyy less than I used to find back in the day when SPR was only $.02.... Now that it is at $.16 everyone and their mom is mining it... But no worries if you can't find it, I don't want you to waist too much of your time. |
|
|
|
Whats with the newbies trying to impersonate devs account name? Hilarious Still developing this coin? Btw how is it still unique with pools present? This is an EXTREMELY old question/argument that is answered in this thread many, many times. Ocminer has a way through a private miner to allow you to mine on his pool however it is a trust/trust relationship. Mine at your own risk. With that said, I like Suprnova pools very much and have never had any problems mining his/her pools. Cool, I guess it should be added to OP then. I like suprnova pools as well, but this kind of shows there is a way around the main principle. On the other hand no hash reported at the pool anyway. Yeah I've stopped the pool as there were no miners interested in mining for quite some time. I can reopen it of course if needed So I have tried to contact ocminer through PM and directly through his suprnova.cc website and for whatever reason I'm not important enough to get a response from him. I am asking if anyone knows where to get the suprnova spreadminer so that people can mine on the suprnova pool for spreadcoin. I used to have the special miner needed to mine on the pool but that was a while back and I no longer have the suprnova spreadminer on my computer. A link to the special miner used be be posted on the getting started page but it is no longer there. I saw your PM but couldn't reply yet, sorry, the old github account with the spread stuff got deleted and I don't have the sources of the miner anymore, I need to look through my backups and find it, I wasn't expecting anyone wanting to mine this coin again after all these years. However nethash is very low, you can just solo-mine and you'll be fine. Oh, ok. If you are able to find those backups that would be awesome. I did find a link to the sources in this very ANN because I went through every page trying to find a link to the actual miner, I'll will go back through and link all the sources that you linked back in the day. Those are very likely the old, unoptimized versions then.. In the meanwhile the miners (sp-mod) are much, much (30-40% faster) yeah, these are all from 2 years ago... The sourcecode is available for everyone here: https://github.com/ocminer/ccminer-spreadcoin-pool-public |
|
|
|
Whats with the newbies trying to impersonate devs account name? Hilarious Still developing this coin? Btw how is it still unique with pools present? This is an EXTREMELY old question/argument that is answered in this thread many, many times. Ocminer has a way through a private miner to allow you to mine on his pool however it is a trust/trust relationship. Mine at your own risk. With that said, I like Suprnova pools very much and have never had any problems mining his/her pools. Cool, I guess it should be added to OP then. I like suprnova pools as well, but this kind of shows there is a way around the main principle. On the other hand no hash reported at the pool anyway. Yeah I've stopped the pool as there were no miners interested in mining for quite some time. I can reopen it of course if needed So I have tried to contact ocminer through PM and directly through his suprnova.cc website and for whatever reason I'm not important enough to get a response from him. I am asking if anyone knows where to get the suprnova spreadminer so that people can mine on the suprnova pool for spreadcoin. I used to have the special miner needed to mine on the pool but that was a while back and I no longer have the suprnova spreadminer on my computer. A link to the special miner used be be posted on the getting started page but it is no longer there. I saw your PM but couldn't reply yet, sorry, the old github account with the spread stuff got deleted and I don't have the sources of the miner anymore, I need to look through my backups and find it, I wasn't expecting anyone wanting to mine this coin again after all these years. However nethash is very low, you can just solo-mine and you'll be fine. Oh, ok. If you are able to find those backups that would be awesome. I did find a link to the sources in this very ANN because I went through every page trying to find a link to the actual miner, I'll will go back through and link all the sources that you linked back in the day. |
|
|
|
I love tatoos with the money i'll make, i could get tatoos  oh yes big tatoos  I like your thinking!! |
|
|
|
Whats with the newbies trying to impersonate devs account name? Hilarious Still developing this coin? Btw how is it still unique with pools present? This is an EXTREMELY old question/argument that is answered in this thread many, many times. Ocminer has a way through a private miner to allow you to mine on his pool however it is a trust/trust relationship. Mine at your own risk. With that said, I like Suprnova pools very much and have never had any problems mining his/her pools. Cool, I guess it should be added to OP then. I like suprnova pools as well, but this kind of shows there is a way around the main principle. On the other hand no hash reported at the pool anyway. Yeah I've stopped the pool as there were no miners interested in mining for quite some time. I can reopen it of course if needed So I have tried to contact ocminer through PM and directly through his suprnova.cc website and for whatever reason I'm not important enough to get a response from him. I am asking if anyone knows where to get the suprnova spreadminer so that people can mine on the suprnova pool for spreadcoin. I used to have the special miner needed to mine on the pool but that was a while back and I no longer have the suprnova spreadminer on my computer. A link to the special miner used be be posted on the getting started page but it is no longer there. |
|
|
|
Now not to sound mean here or anything but as a potential investor (as in supporting the dev directly) and a long time holder and miner of SPR I have come across something weird when I was researching everything that I could so that I could make a sound investment. I find it extremely strange that Georgem has sent over 110,000 SPR to Bittrex over the last month or so. It is no secret that ShutUpHxbuLdy22g9NE4afviUr2Cnqd68H is one of Georgem's addresses as it's at the bottom of every post he makes. I find it very strange that once the price of SPR started to increase on March 2nd, all of the sudden on March 3rd large amounts started to leave that address for Bittrex. From my couple seconds of following the coins I came to a total around 90,000 SPR going to Bittrex in the month of March. Now the part about this that confuses me the most is, if a Dev knows that he is about to release something amazing, which would make the price go up even more, then why would he sell all of his coins before he releases anything? If I know that I was about to release some amazing things in less than a month, I would be holding all of my coins until the price increased from whatever I am about to release. He sent over 30,000 SPR on March 27th alone which at the price of that day is roughly $3,500. I'm normally not one to judge or anything but again, if I was going to release something big and drive the price up further, I wouldn't be selling everything before that. Just my thoughts....
The recent price activity has been due to a scramble to buy SPR in order to take advantage of the planned swap for HLM in a few months. Even then, if I were holding 100k SPR, I'd be foolish to cash out now given the potential for HLM to succeed. That is why I am confused that he has sold soo much in the past month. I wouldn't be selling anything at all until after the HLM blockchain snapshot. Just very very odd to me... |
|
|
|
Great to see this coin being used in reality (I mean the tattoo salon artist in the post earlier). Let's hope there will be more and more tattoo artists who will start accepting this coin.
Also, TATO seems to be stable on Yobit, hopefully we can even see a bigger growth soon!
Yes, it would be amazing to see widespread adoption of this coin by artists everywhere. |
|
|
|
|
I think cryptostiltskin is a busy bee... Haha, get it? A busy... yeah, I'm done...
|
|
|
|
So good idea but hard to implement.
The very best ones always are my friend. Work is progressing nicely as more people join the project in various capacities. Generally speaking, we will only be giving updates when there is relevant information to share with you all. Thus, if you do not hear much from the core team for a few days, it is often a very good thing (as it means we are actively engaged in something of true importance). As I said before, take all the time you guys need to make sure that it is done right! |
|
|
|
Glad to announce: a new team member joining the project. a developer with solid experience in eth chain integration besides he had a coin listed at bittrex while ago.
All the team is called to have a meeting today ,after that we'll release our roadmap work agenda for next three months.
Just like advance, a public tato slack to be launched in few hour too.Pm your mail address to send invite
That is some good news, and hopefully we can get Tato listed on Bittrex, I personally really like Bittrex. |
|
|
|
|
Now not to sound mean here or anything but as a potential investor (as in supporting the dev directly) and a long time holder and miner of SPR I have come across something weird when I was researching everything that I could so that I could make a sound investment. I find it extremely strange that Georgem has sent over 110,000 SPR to Bittrex over the last month or so. It is no secret that ShutUpHxbuLdy22g9NE4afviUr2Cnqd68H is one of Georgem's addresses as it's at the bottom of every post he makes. I find it very strange that once the price of SPR started to increase on March 2nd, all of the sudden on March 3rd large amounts started to leave that address for Bittrex. From my couple seconds of following the coins I came to a total around 90,000 SPR going to Bittrex in the month of March. Now the part about this that confuses me the most is, if a Dev knows that he is about to release something amazing, which would make the price go up even more, then why would he sell all of his coins before he releases anything? If I know that I was about to release some amazing things in less than a month, I would be holding all of my coins until the price increased from whatever I am about to release. He sent over 30,000 SPR on March 27th alone which at the price of that day is roughly $3,500. I'm normally not one to judge or anything but again, if I was going to release something big and drive the price up further, I wouldn't be selling everything before that. Just my thoughts....
|
|
|
|
yep he still active and it's running a simulation on the network, this quote it's by Andy posted in the slack March 27th Last week I had a bootcamp with Barney and our tech scientist - we were working on the final stage of the simulation. I should say I was really impressed of what I saw and I'm sure now the concept works! Barney is going to prepare some statpistical backgrounds and an article based on the sim. Looking forward to see that! join the slack guys https://revolvercoin.slack.comThat is great news. I read an article from him that was from Jan or Feb, I can't remember which. He has some amazing ideas and I can't want to see where he takes this growing community. EDIT - Here is that link https://medium.com/@BarneyHill/decentralized-reward-platform-cae975b6a2d |
|
|
|
|
So if I downloaded the new installer with both wallets is there going to be another update that I have to download before block 150k or am I good to go?
|
|
|
|
Is solo mining still the only option here? I dont know if I want to leave my computer running for days at a time just hoping to get lucky and find a block.
yes don't worry you can find plenty fo block with one gpu, i'm mining with one 1070 and i'm finding 6 blocks per day on average, spreadcoin use block time that are 1 minute so it's good for solo What is your setup for the 1070? I keep running into a problem where my miner bugs out and says found a solution nonce result nonce does not validate on cpu. Are you just running the basic example bat file ? Does the miner have to be placed somewhere in particular ? All I did when I first started was watched the video by e1ghtspace, that was it and I was up and running. I've never seen the problem with it not validating. Are you running an Nvidia GPU ? Also is your wallet encrypted ? I have 2 GTX 980's and my wallet is encrypted so I had to put the miningprivkey=<privatekey> in my .conf file |
|
|
|
Is solo mining still the only option here? I dont know if I want to leave my computer running for days at a time just hoping to get lucky and find a block.
yes don't worry you can find plenty fo block with one gpu, i'm mining with one 1070 and i'm finding 6 blocks per day on average, spreadcoin use block time that are 1 minute so it's good for solo What is your setup for the 1070? I keep running into a problem where my miner bugs out and says found a solution nonce result nonce does not validate on cpu. Are you just running the basic example bat file ? Does the miner have to be placed somewhere in particular ? All I did when I first started was watched the video by e1ghtspace, that was it and I was up and running. I've never seen the problem with it not validating. |
|
|
|
supernova is closing down the XRE pool withdrawal your coins before it's too late, and move to http://yiimp.ccminer.org/ for mining. That's not cool... not cool at all... |
|
|
|
why the net hash is so big, this coin have a small emission rate, shouldn't be only few mega instead i see 256 giga? are there asic mining this coin? with that hashrate the coin is not profitable at all to mine maybe if you accumulate many for pos block, which are quite good in reward
I think the hashrate is a little off right this second. It looks like the last 7 POW blocks were all solved within 10 minutes, so the difficulty and hashrate generators think that the hashrate is way higher than it actually is. My guess is that the hashrate is only around 70GH/s right now. The target blocktime is 3 minutes so solving that may blocks that quickly sent the difficulty up. |
|
|
|
|
Looks pretty cool and innovative, will be fun to watch this thread and see how everything pans out! Good Luck Tattoocoin and Tattoocoin Ltd. Ed.!!!
|
|
|
|
i'm going to ask here, what will be the swap ratio between helium and spreadcoin, if i have 1000 spreadcoin, i can hope to have 1000 helium?
From what I have heard and read it will be 1 for 1, so if you have 1000 like you said in SPR then yes, you will have 1000 HLM. |
|
|
|
|
Show Posts
