 Show Posts
|
|
Pages: [1] 2 »
|
how fix hang opencl error?
try lowering -i, then reinstall drivers, make sure your using recommend drivers |
|
|
|
Hello,
When i try to launch my 5 cards remotely only 1 starts
They do work if i do it directly from the pc.
Is the a command i could use to fix this?
You can't use RDP, you need teamviewer |
|
|
|
says not enough memory intensity value reduced (3). what memory?? version miner 12.2 after last update  From the readme in the install folder and post 1, also search on virtual memory For multi-GPU systems, set Virtual Memory size in Windows at least 16 GB: "Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory". On 12+ on some cards I've not been able to get enough memory to go above 5 even using 66gb of vm |
|
|
|
|
On 12.0, .1, .2 running 5x280x with virtual memory of 56.6gb I'm getting
GPU #3 is going to use too high intensity (6), not enough memory, intensity value reduced (5)
when I set just one card to -i 6 also happens with -old 1
|
|
|
|
Hello guys, not sure if this already happened to someone and already posted it in here but, I'm having a problem with the newer Claymore Versions after ver 11+ with my 4 Rx 470 GPUS, When using ver 12 and ver 12.1 3 of my 4 GPU would show 270-275 on hashrate which is fine, but GPU3 it's showing 0 on hashrate, I have 16.9.2 amd drivers, what should I do? I'm going to download the newer amd drivers and check, but i wanted to post it first, thanks in advanced
From the readme For 4xx cards (Polaris) Crimson 16.12.2 is recommended. Installed Crimson 16.12.2 and I'm still getting one of my four GPUs showing 0 on the hashrate )  EDIT: Upgraded now to lastest amd drivers and disabled watchdog and miner crashes along with the windows and I have to restart. What -i are you using, have you tried lowering it for GPU3 |
|
|
|
Hello guys, not sure if this already happened to someone and already posted it in here but, I'm having a problem with the newer Claymore Versions after ver 11+ with my 4 Rx 470 GPUS, When using ver 12 and ver 12.1 3 of my 4 GPU would show 270-275 on hashrate which is fine, but GPU3 it's showing 0 on hashrate, I have 16.9.2 amd drivers, what should I do? I'm going to download the newer amd drivers and check, but i wanted to post it first, thanks in advanced
From the readme For 4xx cards (Polaris) Crimson 16.12.2 is recommended. |
|
|
|
4x 280x, 1 of my cards restarts the rig even without asm and with i 0, I can't reduce it any lower, had to revert to 11.1, no OC at all.
The same problem here. One of my 280x hangs causing multiple restarts of the watchdog! Never happened before! I've been having same problem , at this point a clean reinstall of 15.12 seems to have my 9xR9 280x in 2 rigs at i 5 and i 4,4,6,7 getting avg 300 h/s for 2+ hrs |
|
|
|
|
I have a rig with powsercolor 5xR9 280x, win 10, radeon 15.12, 16g memory , 120g ssd driver. When trying to run cm 12.0 at -i 6 I get the following
GPU #2 is going to use too high intensity (6), not enough memory, intensity value reduced (5)
GPU #2 algorithm 1, intensity 5
I had 24g of vitual memory allocated and tried the in increments 0f 4g up to 56g and determined there may be some issue. This last try was with one card at -i 6
gave the above results. Anyone else have similar problem
|
|
|
|
All my ZEC rigs just locked up all at once. No idea if the pool died or not but it was a hard reset.
Had to physically yank the power cord from wall and replug.
Upon checking log, they all got the Temperature 511 error. So I dont think its a hardware issue since every rig got this error all at the same time.
Anyone got this issue also?
No problem here 9x 280x and 5x 480 on flypool |
|
|
|
Just reformatted my pc and re-downloaded the wallet. Not wont connect, says alone in the world. Any suggestions?
On your router forward port 4004 to the ip of your rig |
|
|
|
Hello, how can I get an empty Pascalcoin account without mining?
export ur public key and start asking smbd to make u a gift or set buying proposal. ☺ How can i get a public key , any one explain that ? and which software used ? Thanks In the current wallet Project -> Private Keys |
|
|
|
|
After all that has happened I'm confused, my sgminers are all showing Block: c773a595... and I've not mined anything in the transaction for 30 to 40 minutes. Not showing any errors in the log.
|
|
|
|
How do i generate a public key? can anyone help me with that?
i have already downloaded a wallet.
Under project -> private keys and read |
|
|
|
Hey guys, I've been having some issues, especially recently.
I keep getting "miner thread hangs". I've used the settings in the readme, I'm using 16.12.2 with the 11.1 release, and I'm not mixing cards (for the most part) but even when I'm not, the problem persists. "Miner thread hangs, need to restart miner" except it needs to be restarted manually, watchdog doesn't seem to work here.
I thought part of the problem may have been something like not using dummy plugs, but even setting the screen to never turn off and just letting it sit, the problem seems to persist. I've tried very low intensities, down to -i 2 on several rigs, with again, the same problem.
For any of you who've had this problem, how did you fix it, if at all? It just sucks to realize while I went to sleep for 8 hours, my rigs conveniently stopped mining... Any ideas?
Try using 15.12 or 16.3.2 Drivers, that's what Claymore recommends. Well the problem is my biggest rig are RX 480's and still has those problems, but he seems to recommend 16.12.2 for Polaris. Still, I suppose it is worth a try. Even if I lose a little hashrate, I guess I'd prefer better stability over more speed. It'll work out higher in the end anyway.  are you oc'ing or have hacked bios, my 480's are running great, currently running 16.11.3, just reverted to it today for pasc and was on 16.12.2. It seems like as Claymore's releases have come out, my rigs have become less and less stable. At least as a rule. Claymore's... Erm, 9.2, was it? It ran without a hitch. Maybe like once every 5 days a rig would go down. That's steadily gotten worse. Same with his Ethereum dual miner. When I was mining ethereum, I had to go back to previous releases to run stable. I think the biggest thing to try is the driver change I guess... Oh and I was oc'ing, but that still didn't affect anything on previous miner versions. On the 480's, I've been doing 1333/2100 with a small undervolt and no change on power limit. Ran like a top. Not anymore though. And so of course I've been having the same issues with the 470's I have, and when I go back to previous versions, they do run much more reliably, but hashrate does take a hit unfortunately. Still, I guess between the two, I'd rather reliability over raw hashrate if rigs go down every few hours... I'm running sapphire nitro oc and they are "oc'd to the limit" out of the box, their default is 1343/2000. From what I've read 2000 is about the upper limit of a 480. Also you don't get much hashing just instability. Might be worth a try at 2000. I've been getting 265-270 on i4 and no oc on my part Claymore 11.1 and had run over 7 days before I messed with pasc. |
|
|
|
Hey guys, I've been having some issues, especially recently.
I keep getting "miner thread hangs". I've used the settings in the readme, I'm using 16.12.2 with the 11.1 release, and I'm not mixing cards (for the most part) but even when I'm not, the problem persists. "Miner thread hangs, need to restart miner" except it needs to be restarted manually, watchdog doesn't seem to work here.
I thought part of the problem may have been something like not using dummy plugs, but even setting the screen to never turn off and just letting it sit, the problem seems to persist. I've tried very low intensities, down to -i 2 on several rigs, with again, the same problem.
For any of you who've had this problem, how did you fix it, if at all? It just sucks to realize while I went to sleep for 8 hours, my rigs conveniently stopped mining... Any ideas?
Try using 15.12 or 16.3.2 Drivers, that's what Claymore recommends. Well the problem is my biggest rig are RX 480's and still has those problems, but he seems to recommend 16.12.2 for Polaris. Still, I suppose it is worth a try. Even if I lose a little hashrate, I guess I'd prefer better stability over more speed. It'll work out higher in the end anyway. are you oc'ing or have hacked bios, my 480's are running great, currently running 16.11.3, just reverted to it today for pasc and was on 16.12.2. |
|
|
|
I have try everything :
Change nanopool server / change name of worker / change wallet / restart rig, nothing is showing up. 2 of rigs are mining, 1 rest. Whyyyy nanopool, whyyyy?
There is a modified version of miner on nanopool, make sure that download page says modified nanopool miner https://github.com/nanopool/PascalCoin/releases@rlong011 Use -p 0 for Gpu mining I get this, this works correctly for my R9 280x's but this rig has 5x RX 480's, are you runninbg 480's. C:\PascalCoinMiner.-.v1.0.0a>Pascalcoinminer.exe -s pasc-us-west1.nanopool.org:15555 -p 0 -d 0,1,2,3,4 -n 86646-64.mypoloid.miner3/rlong011@verizon.net Invalid device 2. Valid values: 0..1 |
|
|
|
Which drivers are the best for this miner, cause I can't find info about it  I'm using version 16.11.3 RX 470 ~475 MH/s RX 480 ~610 MH/s R9 390x ~640 MH/s R9 390 ~620 MH/s R9 280x ~430 MH/s I'm trying to use the command line you suggested above and have just unintalled and installed 16.11.3 and am getting this with 5 480x's on win 10 pascalcoinminer.exe -s pasc-us-west1.nanopool.org:15555 -p 1 -d 0,1,2,3,4 -n 86646-64.mypoloid.miner3/rlong011@verizon.net Invalid Platform 1. Valid values: 0..0 Any ideas, I downloaded the miner from nanopool on the first day pool was open |
|
|
|
I'm getting the same error with 480's. The only way I can get them to mine is with -d 0,0,0,0,0 and they are hasing at 100 mh/s vs 200+ on 280x's, only differance was my error said valid values 0..1. This miner is very immature. |
|
|
|
what hashrate is everyone getting? i'm getting ~ 156,000 MH/s on a rank old 7950  What miner |
|
|
|
Is there anybody mining PASC coin  yes i am trying to mine but after 7 hours with 5gh no block found i was mining for 15hrs and got a block but ended up being stale as someone with more hashrate got it first 5 hours 5x r9 390x the result 0 returned to Zcash I've been mining Pascal for 14 hours now with 8 rigs. So far nothing (0 blocks found). I'll give it until the morning. If I dont get anything, I'll switch back to ZEC. What miner are you using, on a smaller scale I'm having the same results, no results |
|
|
|
|
