is it safe to set core frequency to 300Mhz (Extreme) for avalon?

[luffy]

godd to know that the top guys are trying to debug avalon

[allinvain]

Code:

Elapsed	MHSav	FoundBlocks	Getworks	Accepted	Rejected	HW	Utility	Discarded	Stale	GetFailures	LocalWork	RemoteFailures	NetworkBlocks	TotalMH	WU	DiffA	DiffR	DiffS	BestShare
21h 37m 6s 71194.26 0 2826 20155 79 1315 15.54 [b]5278[/b] 0 0 1424864 0 152 5.540791e+09 994.59 1289920 5056 0 631843

Bold text are the numbers that seem odd to me. Discarded 5278?!  Hmm. HW 1315. It's mainly the discarded that I'm worried about. Could this be due to the pool or the avalon firmware?

I'm running 4-10.

[Aseras]

Discards are pool or protocol. In stratum/GBT you make up work as you go, if the block changes, the work is discarded. If it's stale and submitted or duplicated work, its rejected. HW errors are just that, the hardware hung doing something and had to be reset.

as long as your work is mostly accepted shares, you are good. If you see a very high % ( >10 % ) of rejected/stale or HW errors then something is wrong.

[allinvain]

Discards are pool or protocol. In stratum/GBT you make up work as you go, if the block changes, the work is discarded. If it's stale and submitted or duplicated work, its rejected. HW errors are just that, the hardware hung doing something and had to be reset.

as long as your work is mostly accepted shares, you are good. If you see a very high % ( >10 % ) of rejected/stale or HW errors then something is wrong.

Thanks for the info Aseras!

So far I think my stats look good.