BitBurner Fury IN STOCK MAJOR PRICE CUT SOLD OUT!

[jelin1984]

Final work at 50 gh
Cool

[cryptx]

AUCTION

https://bitcointalk.org/index.php?topic=344238.0

[mwax321]

Just wondering why everyone is running --avalon-fan 80  instead of --avalon-fan 100 (or at least --avalon-fan 80-100) 

Are you guys afraid of noise, burning out fans, using more watts?

[jelin1984]

At cgminer the hw what mean?
Hardware errors?

[coffeebee]

Cryptx,
Please respond to my email regarding the faulty board that u sent me. Order no 1509. You asked me to contact burninmining, but they has not responded as well. Please respond.

[ummas]

Why should you contact with burnin?
Crpytx: where are you from? You`re sure it`s Belgium not Belgrade ?
Earn more money on yours auctions and than catch up yours guarantee problem.

[goxed]

Everyone who get a board: Please check if there where some dust on the cooler.
Maybe i'm wrong: But for me it seems that the shipped boards are all running for a long time before shipping, isn't it?

Black dust? yes in my case

[cryptx]

In this last batch we have sold hundreds of boards to hundreds of different customers.

All the boards were tested extensively. This last batch has been hashing for weeks and we had zero! boards broken while hashing.

Generally speaking, customers do things with these boards which are not in our control. We have had mails about set-ups which are destined to break boards. Because of this we do not give guarantees on the boards and this is also stated in the terms and conditions on our website. These terms and conditions are approved on while buying the boards. (https://www.asic-hardware.com/terms-and-conditions/)

[jelin1984]

i must final
say
that i am very happy with your
production board

if available again i will buy another one

[deathmul]

When will be another batch?

[wald4tler]

i must final
say
that i am very happy with your
production board

if available again i will buy another one

yes me2, if availabe again, i will take also 2~3 ^^
when the products are available again?

[jelin1984]

These is my options


--avalon-options 115200:32:10:46:280 --bitburner-voltage 1360 --avalon-cutoff 63 --avalon-fan 80 --avalon-temp 55

i am happy

[ortchi]

Hey Guys,

We have already the Bitburner Fury Rev. 1.1 

USB port is broken and we want to update the Firmware.

We know the steps! But we need the correct pin order on the Programmer Connector.

Can anybody help and know these pins?   

[wald4tler]

Hi together. need help
sometimes i cant start the Bitfury?

this message comes:


 cgminer version 3.8.2 - Started: [2013-11-27 19:01:42]
--------------------------------------------------------------------------------
 (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  WU:0.0/m
 ST: 2  SS: 0  NB: 1  LW: 100  GF: 0  RF: 0
 Connected to eu-stratum.btcguild.com diff 2 with stratum as user wald4tler_2
 Block: 708b86df...  Diff:609M  Started: [19:01:42]  Best share: 0
--------------------------------------------------------------------------------
 [P]ool management [ S]ettings [D]isplay options [Q]uit
 BTB 0:  0C/  0C 0000R | ZOMBIE/ 0.000h/s | A:0 R:0 HW:0 WU:0.0/m
--------------------------------------------------------------------------------

[2013-11-27 19:07:36] BTB 0 AvalonTask usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2013-11-27 19:07:36] usb_write error on avalon_write
[2013-11-27 19:07:36] BTB0: Idling 10 miners
[2013-11-27 19:07:36] Probing for an alive pool
[2013-11-27 19:07:37] Pool 0 difficulty changed to 2
[2013-11-27 19:07:37] usb_write error on avalon_write
[2013-11-27 19:07:37] Network diff set to 609M
[2013-11-27 19:07:37] BTB0: Comms error(buffer)
[2013-11-27 19:07:38] BTB0: Device disappeared, shutting down thread
[2013-11-27 19:07:38] BTB 0 failure, disabling!
[2013-11-27 19:07:38] usb_write error on avalon_write
[2013-11-27 19:07:38] usb_write error on avalon_write
[2013-11-27 19:07:38] BTB0: Idling 0 miners


after 3~4x coldreset the miner will run, but i will know why the miner goes in zombie mode?
perhaps I'm doing something wrong!?
(with this settings i get 49~50 GH/s   ->     --avalon-auto --bitburner-voltage 1360 --avalon-cutoff 63 --avalon-fan 100 --avalon-temp 55)

[bestalg]

 
need help
When i suppose to send few of (not working bitburner fury boards)?  FOR REPAIR

ANY contact will be great
thanks

[Japs2013]

need help
When i suppose to send few of (not working bitburner fury boards)?  FOR REPAIR

ANY contact will be great
thanks

+1

[wald4tler]

Is this forum dead?
Because we do not get more information.
For example, whether new Miner be ordered, or when they have to buy again?
The seller may give us some information?