s3 problem , why moving ?

[ToQcHista]

problem is this that may other some damage ? if this aluminium that piece ?

Like in other thread I think we are losing something in translation.  If not you are almost reaching trolling levels with multiple post for every issue, and asking questions that cannot solved with info provided.  Just like the 2 threads you had on using a paperclip to start a psu.

Yes it could or could not have damage other the one fin.  We cannot properly inspect it from a picture, especially a picture in low quality.

There is no need to make multiple threads. And post again and again.  I suggest getting the  "PSu and router." and seeing if it works.

what take photo that tell me will turn on s3 if not ?

[1715086917]

1715086917

[1715086917]

1715086917

[Unacceptable]

Is the heatsink loose Does it look like it moved (shifted,compare with the other side).Check the screws,if loose,tighten them very gently.Again compare tightness with the other side heatsink screws.

If not,then look real close,again comparing to the other side,to see if any components are missing,take your time looking.

If all looks well,plug it in & see if it runs,watch carefully for any sparks/smoke,if it does sparks/smoke,unplug it as fast as you can.

I've never seen a heatsink lose a fin,but anything is possible.

Those pics are not very clear,borrow a better camera from a friend & post CLEAR,high resolution (2650x1920 preferred) pictures of where the fin came off so we can see,if you want folks to help,before you power it up  

[toptekk]

not sure how shipping works were you live  but if it was Damaged in Shipping go to the shipping company and report it  they have to replace it some how it's there fault if it is damage to the point it does not work . at least in the US things that get damaged with UPS  FEDEX etc are replaced or refunded by the shipper again i don't know how that works  were you live even the post office will to some extent . I did not see any one say something about reporting it to the Shipper.



BUT DON'T TAKE TO LONG LIKE THERE TELLING YOU THERE IS ALL WAYS A TIME LIMIT ON ANYTHING.

[ToQcHista]

Is the heatsink loose Does it look like it moved (shifted,compare with the other side).Check the screws,if loose,tighten them very gently.Again compare tightness with the other side heatsink screws.

If not,then look real close,again comparing to the other side,to see if any components are missing,take your time looking.

If all looks well,plug it in & see if it runs,watch carefully for any sparks/smoke,if it does sparks/smoke,unplug it as fast as you can.

I've never seen a heatsink lose a fin,but anything is possible.

Those pics are not very clear,borrow a better camera from a friend & post CLEAR,high resolution (2650x1920 preferred) pictures of where the fin came off so we can see,if you want folks to help,before you power it up  

Now I am going to explain good.

yet, what is "fin" ?

:

my s3 in pages (left&right "heatsink" ) have good tighten screws.

just left heatsink have only one, one piece removed .

you see photo , it is removed thing from heatsink> http://www.picz.ge/img/s1/1504/12/d/d3226e971500.png

else example: http://www.picz.ge/img/s3/1504/12/2/2c92181c6180.jpg

other problem don;t have s3.



 

[philipma1957]

problem is this that may other some damage ? if this aluminium that piece ?

Like in other thread I think we are losing something in translation.  If not you are almost reaching trolling levels with multiple post for every issue, and asking questions that cannot solved with info provided.  Just like the 2 threads you had on using a paperclip to start a psu.

Yes it could or could not have damage other the one fin.  We cannot properly inspect it from a picture, especially a picture in low quality.

There is no need to make multiple threads. And post again and again.  I suggest getting the  "PSu and router." and seeing if it works.

I stopped giving answers he got me so frustrated I tied my penis around my neck and hung myself.

We need a troll emoji for him.

[ToQcHista]

not sure how shipping works were you live  but if it was Damaged in Shipping go to the shipping company and report it  they have to replace it some how it's there fault if it is damage to the point it does not work . at least in the US things that get damaged with UPS  FEDEX etc are replaced or refunded by the shipper again i don't know how that works  were you live even the post office will to some extent . I did not see any one say something about reporting it to the Shipper.

BUT DON'T TAKE TO LONG LIKE THERE TELLING YOU THERE IS ALL WAYS A TIME LIMIT ON ANYTHING.

 

i don't that send back it will be bad for me because i pay Transportation much money and i want this s3 Undeniable work .

[ToQcHista]

problem is this that may other some damage ? if this aluminium that piece ?

Like in other thread I think we are losing something in translation.  If not you are almost reaching trolling levels with multiple post for every issue, and asking questions that cannot solved with info provided.  Just like the 2 threads you had on using a paperclip to start a psu.

Yes it could or could not have damage other the one fin.  We cannot properly inspect it from a picture, especially a picture in low quality.

There is no need to make multiple threads. And post again and again.  I suggest getting the  "PSu and router." and seeing if it works.

I stopped giving answers he got me so frustrated I tied my penis around my neck and hung myself.

We need a troll emoji for him.

you Who  say?

[toptekk]

Is the heatsink loose Does it look like it moved (shifted,compare with the other side).Check the screws,if loose,tighten them very gently.Again compare tightness with the other side heatsink screws.

If not,then look real close,again comparing to the other side,to see if any components are missing,take your time looking.

If all looks well,plug it in & see if it runs,watch carefully for any sparks/smoke,if it does sparks/smoke,unplug it as fast as you can.

I've never seen a heatsink lose a fin,but anything is possible.

Those pics are not very clear,borrow a better camera from a friend & post CLEAR,high resolution (2650x1920 preferred) pictures of where the fin came off so we can see,if you want folks to help,before you power it up  

Now I am going to explain good.

yet, what is "fin" ?

:

my s3 in pages (left&right "heatsink" ) have good tighten screws.

just left heatsink have only one, one piece removed .

you see photo , it is removed thing from heatsink> http://www.picz.ge/img/s1/1504/12/d/d3226e971500.png

else example: http://www.picz.ge/img/s3/1504/12/2/2c92181c6180.jpg

other problem don;t have s3.

You have the S3 or not I'm kind of lost at this point  if you have it, that's all that looks like came off, get a router and PSU, try it out,  at this point the seller has said  he will replace it and check with your shipping company .

but  remember do it before the time limit  runs out . or you will have a nice paper weight.

[ToQcHista]

interesting .


what is problem ?


Now why is the probability that s3 don't will don't turn on ?


just only one think removed;

[Unacceptable]

Is the heatsink loose Does it look like it moved (shifted,compare with the other side).Check the screws,if loose,tighten them very gently.Again compare tightness with the other side heatsink screws.

If not,then look real close,again comparing to the other side,to see if any components are missing,take your time looking.

If all looks well,plug it in & see if it runs,watch carefully for any sparks/smoke,if it does sparks/smoke,unplug it as fast as you can.

I've never seen a heatsink lose a fin,but anything is possible.

Those pics are not very clear,borrow a better camera from a friend & post CLEAR,high resolution (2650x1920 preferred) pictures of where the fin came off so we can see,if you want folks to help,before you power it up  

Now I am going to explain good.

yet, what is "fin" ?

:

my s3 in pages (left&right "heatsink" ) have good tighten screws.

just left heatsink have only one, one piece removed .

you see photo , it is removed thing from heatsink> http://www.picz.ge/img/s1/1504/12/d/d3226e971500.png

else example: http://www.picz.ge/img/s3/1504/12/2/2c92181c6180.jpg

other problem don;t have s3.



 

That piece that broke/came off,I can't seem to see a "match" anywhere on my S3+ miners heatsink(top,bottom,middle of outer heatsink,nothing resembles that piece),you sure that came from the miner,not just something that maybe got stuck in

As long as your have checked that no little resistors/capacitors or any small electrical parts are missing,if you think they are all there & the heatsinks are tight,then power up the miner as soon as you can,time is running out for you to return the miner if it infact is not working.

[Unacceptable]

problem is this that may other some damage ? if this aluminium that piece ?

Like in other thread I think we are losing something in translation.  If not you are almost reaching trolling levels with multiple post for every issue, and asking questions that cannot solved with info provided.  Just like the 2 threads you had on using a paperclip to start a psu.

Yes it could or could not have damage other the one fin.  We cannot properly inspect it from a picture, especially a picture in low quality.

There is no need to make multiple threads. And post again and again.  I suggest getting the  "PSu and router." and seeing if it works.

I stopped giving answers he got me so frustrated I tied my penis around my neck and hung myself.

We need a troll emoji for him.

Your a hoot phil     Yeah,his "language" barrier is a brain twister 

[ToQcHista]

Is the heatsink loose Does it look like it moved (shifted,compare with the other side).Check the screws,if loose,tighten them very gently.Again compare tightness with the other side heatsink screws.

If not,then look real close,again comparing to the other side,to see if any components are missing,take your time looking.

If all looks well,plug it in & see if it runs,watch carefully for any sparks/smoke,if it does sparks/smoke,unplug it as fast as you can.

I've never seen a heatsink lose a fin,but anything is possible.

Those pics are not very clear,borrow a better camera from a friend & post CLEAR,high resolution (2650x1920 preferred) pictures of where the fin came off so we can see,if you want folks to help,before you power it up  

Now I am going to explain good.

yet, what is "fin" ?

:

my s3 in pages (left&right "heatsink" ) have good tighten screws.

just left heatsink have only one, one piece removed .

you see photo , it is removed thing from heatsink> http://www.picz.ge/img/s1/1504/12/d/d3226e971500.png

else example: http://www.picz.ge/img/s3/1504/12/2/2c92181c6180.jpg

other problem don;t have s3.

That piece that broke/came off,I can't seem to see a "match" anywhere on my S3+ miners heatsink(top,bottom,middle of outer heatsink,nothing resembles that piece),you sure that came from the miner,not just something that maybe got stuck in

As long as your have checked that no little resistors/capacitors or any small electrical parts are missing,if you think they are all there & the heatsinks are tight,then power up the miner as soon as you can,time is running out for you to return the miner if it infact is not working.

i'm sure that this piece is s3.

because only one there is missing i see.

this piece come from pages heatsink..

there else one piece similar is not tight, others are cool /tight .

[ToQcHista]

owner tell me this > "Ok it looks like that is just a fin blade. You don't need it. You can simply unscrew the top and pull it out. Let me know if you have any problems well doing it. "

[notlist3d]

problem is this that may other some damage ? if this aluminium that piece ?

Like in other thread I think we are losing something in translation.  If not you are almost reaching trolling levels with multiple post for every issue, and asking questions that cannot solved with info provided.  Just like the 2 threads you had on using a paperclip to start a psu.

Yes it could or could not have damage other the one fin.  We cannot properly inspect it from a picture, especially a picture in low quality.

There is no need to make multiple threads. And post again and again.  I suggest getting the  "PSu and router." and seeing if it works.

I stopped giving answers he got me so frustrated I tied my penis around my neck and hung myself.

We need a troll emoji for him.

At lest I am not the only one.  I honestly enjoy helping people, and sharing mining.  I honestly cannot believe it is all "language barrier" at this point.  It truly seems like trolling.

And OP you need to inspect it as others said.  We CAN NOT say if it works or not from a picture.   You need to do it in a timely manner.   Every day you wait is one more day it will be harder to say it was damaged in shipping.  If you keep it for weeks shopping for PSU and Router I think shipping company will say it must have been working to keep so long.

And ofcourse the seller told you it will work.  He is one who would have to get you another one if it's broken.   

[ToQcHista]

problem is this that may other some damage ? if this aluminium that piece ?

Like in other thread I think we are losing something in translation.  If not you are almost reaching trolling levels with multiple post for every issue, and asking questions that cannot solved with info provided.  Just like the 2 threads you had on using a paperclip to start a psu.

Yes it could or could not have damage other the one fin.  We cannot properly inspect it from a picture, especially a picture in low quality.

There is no need to make multiple threads. And post again and again.  I suggest getting the  "PSu and router." and seeing if it works.

I stopped giving answers he got me so frustrated I tied my penis around my neck and hung myself.

We need a troll emoji for him.

At lest I am not the only one.  I honestly enjoy helping people, and sharing mining.  I honestly cannot believe it is all "language barrier" at this point.  It truly seems like trolling.

And OP you need to inspect it as others said.  We CAN NOT say if it works or not from a picture.   You need to do it in a timely manner.   Every day you wait is one more day it will be harder to say it was damaged in shipping.  If you keep it for weeks shopping for PSU and Router I think shipping company will say it must have been working to keep so long.

And ofcourse the seller told you it will work.  He is one who would have to get you another one if it's broken.   

thanks.

i The day after tomorrow buy router and PSU  and will see working if not

[grn]

DONT DO IT!


BOOM


MWAHAHAHAHAHA

[ToQcHista]

DONT DO IT!


BOOM


MWAHAHAHAHAHA

what is boom ?

[notlist3d]

DONT DO IT!


*saving space


MWAHAHAHAHAHA

what is boom ?

I think it is lost in translation.  I think some of us are just worried and wishing you the best with the miner.

Have you got the PSU and router to test it out?

[ToQcHista]

DONT DO IT!


*saving space


MWAHAHAHAHAHA

what is boom ?

I think it is lost in translation.  I think some of us are just worried and wishing you the best with the miner.

Have you got the PSU and router to test it out?

tomorrow should run away that buy psu and router and here write answer working if not .

i can't waiting, i worried .

to me now time is 11:15 AM

[notlist3d]

This is like something you just cannot stop looking at, even though you know you should?

I'm really curious OP did you get it hooked up and what was result?