quakefiend420 (OP)
Legendary
Offline
Activity: 784
Merit: 1000
|
|
April 25, 2015, 05:39:39 AM Last edit: January 08, 2016, 01:03:02 AM by quakefiend420 |
|
PCIe CABLES NOW IN STOCK!! See below for pricing. Cables were purchased here on the forum from user klondike_bar, so out of respect for his business I will not sell just cables alone, only with a PSU order.
These are capable of running an SP20 at full tilt 24/7(I've done it with several!). Solid quality and can run on 120v or 240v unlike most of the bigger server supplies. Surprisingly quiet, I usually hear my miners' fans rather than the PSUs. These meet or exceed Platinum specs across the board, they are seriously good units. 1100w SPECS:http://www.digikey.com/product-detail/en/PFE1100-12-054RA/PFE1100-12-054RA-ND/3535541Highlights: Voltage - Input 90 ~ 264 VAC Voltage - Output 1 12V Voltage - Output 2 5V Current - Output (Max) 90A, 3.3A Power (Watts) 1100W Applications ITE (Commercial) Efficiency 94% Operating Temperature 0°C ~ 70°C (With Derating) Size / Dimension 14.28" L x 2.15" W x 1.57" H (362.7mm x 54.5mm x 40.0mm) Link to a dual breakout board just so you can see how good of a deal you're getting(not the one included, see pics): http://www.digikey.com/product-detail/en/SNP-OP-BOARD-01/179-2696-ND/43147341300s ARE ALL SOLD FOR NOW1300W SPECS:
Voltage - Input 90 ~ 264 VAC Voltage - Output 1 12V Current - Output (Max) 108A Power (Watts) 1300W Applications ITE (Commercial) Efficiency 92% Operating Temperature 0°C ~ 45°C Size / Dimension 12.66" L x 2.15" W x 1.57" H (321.5mm x 54.5mm x 40.0mm)PRICING:1100w PSU w/ one breakout board - $70/ea + actual shipping 1300w PSU w/ one breakout board - $100/ea + actual shippingPCIe cables - $3/ea(excellent quality 24" 16-gauge cables with ring terminals already installed) So now you're off the races with 1.1kw or 1.3kw of platinum rated power for significantly cheaper than any ATX supply you'll find. Seriously, go look. The Seasonic 660w sells used for more than I'm asking for the 1300w and it's half the output. I've tested each and confirmed that they work properly. The breakout board is 12V+ and -. These could also likely be used as direct replacements for other miners that use 12V directly to the boards such as the Antminer S4 or Spondoolies gear(pretty sure you have to set a flag in software to generic PSU somewhere though for the Spondoolies). Please confirm before purchasing as I've only personally used these with PCIe cables to power S3s and SP20s, however. If you need heavy gauge 12V cabling with ring terminals on both ends I have some available as well that I will include at no charge. As you can see, I have a lot of these... 1100w:1300w:Breakout board:Example of how I use them(note these cables are NOT included, example only!): Any questions, just ask!
|
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
quakefiend420 (OP)
Legendary
Offline
Activity: 784
Merit: 1000
|
|
April 26, 2015, 08:23:22 PM |
|
Up, will probably be adding cabling to these soon to make turnkey packages.
|
|
|
|
quakefiend420 (OP)
Legendary
Offline
Activity: 784
Merit: 1000
|
|
April 27, 2015, 08:12:22 PM |
|
A few sold, up we go!
|
|
|
|
mrkubanftw
|
|
April 27, 2015, 08:41:06 PM |
|
Interested in the 1300w. So you don't have any breakout board for the 1300watt currently? Or you do lol?
|
|
|
|
quakefiend420 (OP)
Legendary
Offline
Activity: 784
Merit: 1000
|
|
April 27, 2015, 08:43:20 PM |
|
Interested in the 1300w. So you don't have any breakout board for the 1300watt currently? Or you do lol?
No, I do have breakout boards for the 1300s. How many do you want? EDIT: I see how my wording could have been confusing in the OP, just fixed it.
|
|
|
|
mrkubanftw
|
|
April 27, 2015, 08:49:50 PM |
|
I need just one 1300 watt with a breakout board for now. Do you have a cable package currently? I should only need 4 sets of pci-e. Trying to run two S5's with one unit.
Ultimately I will need two more. Just like to try it out with the units for a bit first.
|
|
|
|
quakefiend420 (OP)
Legendary
Offline
Activity: 784
Merit: 1000
|
|
April 27, 2015, 09:20:51 PM |
|
I need just one 1300 watt with a breakout board for now. Do you have a cable package currently? I should only need 4 sets of pci-e. Trying to run two S5's with one unit.
Ultimately I will need two more. Just like to try it out with the units for a bit first.
Not yet, I'm working on getting cable packages going as well but haven't received them just yet. Don't the S5s need 4 PCIe each?
|
|
|
|
mrkubanftw
|
|
April 27, 2015, 09:32:11 PM |
|
Honestly i need to double check. I'm going off of the S3. But you're probably right. The S3 only needs two unless you are OC'ing but considering the added wattage to the single unit they probably do need 4 pci-e connections. I can always source those.
So its $100 for the 1300watt unit plus breakout board? Do you accept paypal?
Also i may be walking on thin ice here but could two s5's run on the 1100watt unit you have? I only ask because its more efficient.. and iv'e seen the s5's only really pull 560 a piece. If you ran an SP20 at full boar i would think it could handle two s5's at stock?
|
|
|
|
quakefiend420 (OP)
Legendary
Offline
Activity: 784
Merit: 1000
|
|
April 27, 2015, 10:17:54 PM |
|
Honestly i need to double check. I'm going off of the S3. But you're probably right. The S3 only needs two unless you are OC'ing but considering the added wattage to the single unit they probably do need 4 pci-e connections. I can always source those.
So its $100 for the 1300watt unit plus breakout board? Do you accept paypal?
Also i may be walking on thin ice here but could two s5's run on the 1100watt unit you have? I only ask because its more efficient.. and iv'e seen the s5's only really pull 560 a piece. If you ran an SP20 at full boar i would think it could handle two s5's at stock?
Yeah, the S3 only draws about 360w, so two is OK there. I've never owned an S5 but I'd bet that 4 would be recommended based on the power draw. I generally prefer BTC. Check my trust, I'm not known to rip people off. Also fine with escrow(you cover the fee), if you like. Might be able to work something out with PayPal as a gift. Yes, $100+shipping for the 1300 and the breakout board. You may be able to do two S5s on the 1100, but I'd probably go with the 1300 just to give some headroom for power spikes and what not. Plus the efficiency is a bit better when you're closer to 80-90% load than 100%.
|
|
|
|
mrkubanftw
|
|
April 27, 2015, 10:27:54 PM |
|
Alright good sir ill take one of the 1300's. I would prefer paypal only because i don't have a lot of btc right now and i tend to value it more than usd, as we all should. But I can send it off through paypal as a gift if that's alright? Check shipping to 53172. Try 3 day- would be super if i could get if friday
|
|
|
|
quakefiend420 (OP)
Legendary
Offline
Activity: 784
Merit: 1000
|
|
April 27, 2015, 11:01:18 PM |
|
Alright good sir ill take one of the 1300's. I would prefer paypal only because i don't have a lot of btc right now and i tend to value it more than usd, as we all should. But I can send it off through paypal as a gift if that's alright? Check shipping to 53172. Try 3 day- would be super if i could get if friday Looks like you're looking at $20 even for shipping via FedEx 3 day. Will send you a PM with details and can get it on the way tomorrow for you.
|
|
|
|
mrkubanftw
|
|
April 28, 2015, 12:41:32 PM |
|
Payment Sent!
|
|
|
|
quakefiend420 (OP)
Legendary
Offline
Activity: 784
Merit: 1000
|
|
April 28, 2015, 04:13:25 PM |
|
Payment Sent!
Got it, going out today!
|
|
|
|
quakefiend420 (OP)
Legendary
Offline
Activity: 784
Merit: 1000
|
|
April 30, 2015, 12:26:12 AM |
|
Up. Several 1300s sold but still have a few and a ton of 1100w units left. Get 'em while they're hot!
|
|
|
|
MCHouston
|
|
April 30, 2015, 05:32:55 AM |
|
Where are you shipping from?
|
BTC 13WWomzkAoUsXtxANN9f1zRzKusgFWpngJ LTC LKXYdqRzRC8WciNDtiRwCeb8tZtioZA2Ks DOGE DMsTJidwkkv2nL7KwwkBbVPfjt3MhS4TZ9
|
|
|
quakefiend420 (OP)
Legendary
Offline
Activity: 784
Merit: 1000
|
|
April 30, 2015, 06:12:27 AM |
|
Where are you shipping from?
TX
|
|
|
|
Finksy
Legendary
Offline
Activity: 1022
Merit: 1003
|
|
April 30, 2015, 12:52:16 PM |
|
Nice!
You can also hit up Klondike_Bar for PCIe to bare leads, he's in Canada for those across the border and offers them for pretty good pricing.
I would definitely suggest sourcing some cables with ring terminals already crimped on and offer it as a package to save time, just my opinion.
|
|
|
|
MCHouston
|
|
April 30, 2015, 06:17:11 PM |
|
Where are you shipping from?
TX Houston?
|
BTC 13WWomzkAoUsXtxANN9f1zRzKusgFWpngJ LTC LKXYdqRzRC8WciNDtiRwCeb8tZtioZA2Ks DOGE DMsTJidwkkv2nL7KwwkBbVPfjt3MhS4TZ9
|
|
|
quakefiend420 (OP)
Legendary
Offline
Activity: 784
Merit: 1000
|
|
April 30, 2015, 06:18:02 PM |
|
Where are you shipping from?
TX Houston? Austin, actually.
|
|
|
|
quakefiend420 (OP)
Legendary
Offline
Activity: 784
Merit: 1000
|
|
May 01, 2015, 01:39:07 PM |
|
Up.
|
|
|
|
|