delete this post.

[meccoin4me]

it is possible that the price tomorrow will be higher ten ICO price!!!

[q327K091]

sold around 38 XTP before tomorrow morning  was one of the first in the block chain , then peta hash rate hit.. this ain't good for distribution.. moved BTC to long term block chains with no POS which I usually do

[IsotopeDeveloper]

Thanks everybody for the launch support and trust showed despite all the FUD and spam happened!

Let's enjoy this short PoW mining and we'll start delivering some news and updates once staking period begins.

Enjoy XTP.

[jc12345]

Here is the Raspberry Pi wallet for v1.0.0.0 - only for the headless daemon (command line wallet).

Important:
1) The wallet was built on a Raspberry Pi2 (ARM7) running Raspbian Wheezy. It might work on an older Pi but I have not tested it
2) Installation directory where the binaries are installed is ~/opt/xtp or /home/pi/opt/xtp
3) All that is needed is to execute the command below on your Pi in a terminal window and afterwards you need to go to the directory with the wallets and run the daemon (Isotoped) with the options you want at the command prompt or in a terminal window
4) An Internet connection is required for the installation
5) A bootstrap.dat is used to fast track the blockchain sync - up to block 657. It is small now but I will make a new bootstrap.dat when the block height has grown
6) The bootstrap.dat also works for Windows wallets. For your convenience I have included a direct link below to an untarred bootstrap.dat to make it easy for the Windows users. Windows users just have to copy the bootstrap.dat file into their c\users\yourusername\AppData\Roaming\Isotope folder and run the Win client again
7) You need at least an 8GB memory card
8.) The installation itself takes about 30-45min on an out-of-the-box Pi
9) You cannot just download the binaries, you have to run the script to get the dependencies as well else it will not run
10) The installation script does not enable the UFW firewall by default. If you want to enable it, uncomment the UFW lines in the script and add the port you want open and run it again or enable it manually by running the UFW commands as in the script with the correct port numbers.
11) Always backup your wallet first.

Instructions to use the daemon:

1) Since you have an Isotope.conf file with the startup settings in it, go to the folder with the binaries ~/opt/xtp and enter ./Isotope in a terminal window to start the server
2) After the blockchain has been imported you can enter the normal wallet commands that you would as in a Windows debug console preceded with ./Isotoped
3) Remember to always make a backup of your wallet.dat file before you do anything like encrypting it
4) To encrypt your wallet run the command ./Isotoped encryptwallet <yourpassword>
5) To stake with your wallet run the command ./Isotoped walletpassphrase <yourpassword> 99999999 true

Let me know about any issues that you may encounter.

To kickstart the installation execute the following command at the command prompt or in a terminal window on your Pi:

Code:

wget https://bitbucket.org/jc12345/xtp/downloads/xtp_installation_pi.sh && chmod +x xtp_installation_pi.sh && ./xtp_installation_pi.sh && rm -f xtp_installation_pi.sh

Direct links:
Link to installation script
Link to Isotoped
Link to bootstrap.dat up to block 657
Link to bootstrap.dat up to block 657, untarred for the Win users
Link to checksums.txt

If you like this, you are welcome to donate XTP to XDo2PBUoVTJUm93LzVWjafxVvfz1NuFGHg

[IsotopeDeveloper]

Here is the Raspberry Pi wallet for v1.0.0.0 - only for the headless daemon (command line wallet).

Important:
1) The wallet was built on a Raspberry Pi2 (ARM7) running Raspbian. It might work on an older Pi but I have not tested it
2) Installation directory where the binaries are installed is ~/opt/xtp or /home/pi/opt/xtp
3) All that is needed is to execute the command below on your Pi in a terminal window and afterwards you need to go to the directory with the wallets and run the daemon (Isotoped) with the options you want at the command prompt or in a terminal window
4) An Internet connection is required for the installation
5) A bootstrap.dat is used to fast track the blockchain sync - up to block 657. It is small now but I will make a new bootstrap.dat when the block height has grown
6) The bootstrap.dat also works for Windows wallets. For your convenience I have included a direct link below to an untarred bootstrap.dat to make it easy for the Windows users
7) You need at least an 8GB memory card
8.) The installation itself takes about 30-45min on an out-of-the-box Pi
9) You cannot just download the binaries, you have to run the script to get the dependencies as well else it will not run
10) The installation script does not enable the UFW firewall by default. If you want to enable it, uncomment the UFW lines in the script and add the port you want open and run it again or enable it manually by running the UFW commands as in the script with the correct port numbers.
11) Always backup your wallet first.

Instructions to use the daemon:

1) Since you have an Isotope.conf file with the startup settings in it, go to the folder with the binaries ~/opt/xtp and enter ./Isotope in a terminal window to start the server
2) After this you can enter the normal wallet commands that you would as in a Windows debug console preceded with ./Isotoped
3) Remember to always make a backup of your wallet.dat file before you do anything like encrypting it
4) To encrypt your wallet run the command ./Isotoped encryptwallet <yourpassword>
5) To stake with your wallet run the command ./Isotoped walletpassphrase <yourpassword> 99999999 true

Let me know about any issues that you may encounter.

To kickstart the installation execute the following command at the command prompt or in a terminal window on your Pi:

Code:

wget https://bitbucket.org/jc12345/xtp/downloads/xtp_installation_pi.sh && chmod +x xtp_installation_pi.sh && ./xtp_installation_pi.sh && rm -f xtp_installation_pi.sh

Direct links:
Link to installation script
Link to Isotoped
Link to bootstrap.dat up to block 657
Link to bootstrap.dat up to block 657, untarred for the Win users
Link to checksums.txt

If you like this, you are welcome to donate XTP to XDo2PBUoVTJUm93LzVWjafxVvfz1NuFGHg

You did an amazing job, thanks for your contribution to our community growth.

Your bounty is coming

[Anakinska33]

ICO price was 7500 sats?

[TerraMaster]

ICO price was 7500 sats?

Ya before mining started. Lets hope it works its way back up and beyond. I am thinking it will at his point. 

[Fonziecoin]

Does anyone know what this was cloned from?

[jerowacik]

ok . Dead ?

[xPooky]

Does anyone know what this was cloned from?

Positron

[ocminer]

ok . Dead ?

Not even 24h old?

[meccoin4me]

ok . Dead ?

Not even 24h old?

these days people aspect to get rich in 1 hour ,  lol , when not rich in 1 hour they think coin dead

[LordPiccolo]

ok . Dead ?

Really effing annoys me when people use the word dead in crypto!

Did you lose your 50 cents you invested

[meccoin4me]

13 blocks more and i start staking

[meccoin4me]

13 blocks more and i start staking

I just staked now!!!

glad that staking works

[meccoin4me]

yep also staked now

[IsotopeDeveloper]

PoW is now officially over.

DPOS stage is started until block 10k following the reward schedule posted on OP. XTP auto payouts multipool will be online also, to provide the ability of "mining" Isotope with your hardwares.

Regards and have a good stake!

[ocminer]

Thanks a lot for mining @ Suprnova guys, was a pleasure for me, Stratums are now stopped, please withdraw your funds.

Thanks

[1.25L]

what exactly is going on here why are people selling for under ico price what next how are we going to turn this coin around?

[TerraMaster]

Thanks a lot for mining @ Suprnova guys, was a pleasure for me, Stratums are now stopped, please withdraw your funds.

Thanks

YW, smooth as always!