.

[snipsnoop]

He seems to working flat out at this and are making good progress.
But should really get the changes under control and ONLY do hardforks at set block heights..

Update code with conditions.. Mandatory Client Update
Under block 1000 do normal.. Over 1000 changes kicks in

And if you are no using the new wallet, you will be on fork after block height 1000..

I like the dev though.. Seems like a nice guy. Hope this will go somewhere with a bit of support

[mammix2]

He seems to working flat out at this and are making good progress.
But should really get the changes under control and ONLY do hardforks at set block heights..

Update code with conditions.. Mandatory Client Update
Under block 1000 do normal.. Over 1000 changes kicks in

And if you are no using the new wallet, you will be on fork after block height 1000..

Ok, i'll be watching to see how this goes...

[Mota-vated]

Okay does anyone else have the problem that their coins have confirmed and matured but they haven't appeared on the balance side of their wallets yet? because I have 14000 coins which have past the maturing stage to be confirmed but my balance still says 0 coins

This what you mean?

7000 XNA NEW BLOCK!!!!!!??  this is normal?

I think so:
https://i.imgur.com/0DUJcTV.png

What I'm curious about now is, the balance not changing/updating. Is this normal?

https://i.imgur.com/FobXIa4.png

Edit: Well, the balance does appear in the "Send Coins" section, so at least I know how much I've got. Would be nice if the "Overview" displayed the balance correctly though.

[NoobKidOnTheBlock]

He seems to working flat out at this and are making good progress.
But should really get the changes under control and ONLY do hardforks at set block heights..

Update code with conditions.. Mandatory Client Update
Under block 1000 do normal.. Over 1000 changes kicks in

And if you are no using the new wallet, you will be on fork after block height 1000..

I like the dev though.. Seems like a nice guy. Hope this will go somewhere with a bit of support

Ya he definitely seems like a good guy who is trying really hard to make sure everything works that's for sure Which is always nice to see in a Dev.  But seriously has anyone else got the problem of coins not showing up in their balance in their wallets? Because I have 14000 coins which for some reason have not shown up in my balance even though they are confirmed already?

[NoobKidOnTheBlock]

Okay does anyone else have the problem that their coins have confirmed and matured but they haven't appeared on the balance side of their wallets yet? because I have 14000 coins which have past the maturing stage to be confirmed but my balance still says 0 coins

This what you mean?

7000 XNA NEW BLOCK!!!!!!??  this is normal?

I think so:


What I'm curious about now is, the balance not changing/updating. Is this normal?



Edit: Well, the balance does appear in the "Send Coins" section, so at least I know how much I've got. Would be nice if the "Overview" displayed the balance correctly though.

Yes exactly where you know your wallet says that you have the coins but they aren't appearing in the balance portion of the wallet

[Mota-vated]

Yes exactly where you know your wallet says that you have the coins but they aren't appearing in the balance portion of the wallet

Try checking the "Send Coins" tab/section:
https://i.imgur.com/fLCIWS8.png

It might not be comfortable, but at least you know it's working... well, hopefully it's working.

[NoobKidOnTheBlock]

Ya no I seen that the coins were there in my send part of the wallet I just am trying to figure out why they aren't appearing in the balance portion of the wallet

[ctgiant]

could someone list their getpeerinfo for the new 2.0 wallet?

I can't get any connections using the new conf settings.

[NoobKidOnTheBlock]

could someone list their getpeerinfo for the new 2.0 wallet?

I can't get any connections using the new conf settings.

This is what my wallet says

19:59:27

getpeerinfo


19:59:28

[
{
"addr" : "182.56.79.76:10592",
"services" : "00000001",
"lastsend" : 1431043161,
"lastrecv" : 1431043157,
"conntime" : 1431031264,
"bytessent" : 121528,
"bytesrecv" : 36277,
"blocksrequested" : 0,
"version" : 1000000,
"subver" : "/Adanine:2.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 125,
"banscore" : 0
},
{
"addr" : "208.90.164.68:50370",
"services" : "00000001",
"lastsend" : 1431043161,
"lastrecv" : 1431043156,
"conntime" : 1431031299,
"bytessent" : 110022,
"bytesrecv" : 34485,
"blocksrequested" : 1,
"version" : 1000000,
"subver" : "/Adanine:2.0.0/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 128,
"banscore" : 0
},
{
"addr" : "82.193.155.224:54179",
"services" : "00000001",
"lastsend" : 1431043161,
"lastrecv" : 1431043157,
"conntime" : 1431031908,
"bytessent" : 96643,
"bytesrecv" : 32869,
"blocksrequested" : 1,
"version" : 1000000,
"subver" : "/Adanine:2.0.0/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 173,
"banscore" : 0
},
{
"addr" : "82.193.155.224:50201",
"services" : "00000001",
"lastsend" : 1431043161,
"lastrecv" : 1431043157,
"conntime" : 1431032093,
"bytessent" : 87311,
"bytesrecv" : 36773,
"blocksrequested" : 1,
"version" : 1000000,
"subver" : "/Adanine:2.0.0/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 163,
"banscore" : 0
},
{
"addr" : "82.193.155.224:56917",
"services" : "00000001",
"lastsend" : 1431043161,
"lastrecv" : 1431043157,
"conntime" : 1431032581,
"bytessent" : 102160,
"bytesrecv" : 34966,
"blocksrequested" : 52,
"version" : 1000000,
"subver" : "/Adanine:2.0.0/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 163,
"banscore" : 0
},
{
"addr" : "82.193.155.224:57491",
"services" : "00000001",
"lastsend" : 1431043161,
"lastrecv" : 1431043157,
"conntime" : 1431032787,
"bytessent" : 77297,
"bytesrecv" : 35251,
"blocksrequested" : 0,
"version" : 1000000,
"subver" : "/Adanine:2.0.0/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 217,
"banscore" : 0
},
{
"addr" : "182.56.79.76:60417",
"services" : "00000001",
"lastsend" : 1431043161,
"lastrecv" : 1431043157,
"conntime" : 1431033341,
"bytessent" : 80933,
"bytesrecv" : 34685,
"blocksrequested" : 4,
"version" : 1000000,
"subver" : "/Adanine:2.0.0/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 212,
"banscore" : 0
},
{
"addr" : "82.213.142.244:49974",
"services" : "00000001",
"lastsend" : 1431043161,
"lastrecv" : 1431043157,
"conntime" : 1431034800,
"bytessent" : 63624,
"bytesrecv" : 28747,
"blocksrequested" : 1,
"version" : 1000000,
"subver" : "/Adanine:2.0.0/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 281,
"banscore" : 0
},
{
"addr" : "82.193.155.224:49783",
"services" : "00000001",
"lastsend" : 1431043155,
"lastrecv" : 1431043156,
"conntime" : 1431035605,
"bytessent" : 59367,
"bytesrecv" : 26780,
"blocksrequested" : 1,
"version" : 1000000,
"subver" : "/Adanine:2.0.0/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 163,
"banscore" : 0
},
{
"addr" : "73.15.246.149:49704",
"services" : "00000001",
"lastsend" : 1431043161,
"lastrecv" : 1431043156,
"conntime" : 1431037324,
"bytessent" : 49882,
"bytesrecv" : 27472,
"blocksrequested" : 0,
"version" : 1000000,
"subver" : "/Adanine:2.0.0/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 50,
"banscore" : 0
},
{
"addr" : "212.17.40.234:10592",
"services" : "00000001",
"lastsend" : 1431043161,
"lastrecv" : 1431043157,
"conntime" : 1431037980,
"bytessent" : 34657,
"bytesrecv" : 19265,
"blocksrequested" : 1,
"version" : 1000000,
"subver" : "/Adanine:2.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 332,
"banscore" : 0
},
{
"addr" : "212.234.48.207:57965",
"services" : "00000001",
"lastsend" : 1431043161,
"lastrecv" : 1431043157,
"conntime" : 1431038880,
"bytessent" : 31394,
"bytesrecv" : 12879,
"blocksrequested" : 1,
"version" : 1000000,
"subver" : "/Adanine:2.0.0/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 353,
"banscore" : 0
},
{
"addr" : "95.68.163.233:54715",
"services" : "00000001",
"lastsend" : 1431043161,
"lastrecv" : 1431043157,
"conntime" : 1431039919,
"bytessent" : 32321,
"bytesrecv" : 14689,
"blocksrequested" : 2,
"version" : 1000000,
"subver" : "/Adanine:2.0.0/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 368,
"banscore" : 0
},
{
"addr" : "37.230.100.189:49261",
"services" : "00000001",
"lastsend" : 1431043161,
"lastrecv" : 1431043157,
"conntime" : 1431043109,
"bytessent" : 3219,
"bytesrecv" : 2223,
"blocksrequested" : 0,
"version" : 1000000,
"subver" : "/Adanine:2.0.0/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 428,
"banscore" : 0
}
]

[ctgiant]

thanks.  that helped a lot.

[NoobKidOnTheBlock]

thanks.  that helped a lot.

Has anyone encountered a runtime error and their wallet just shut down on them?  Mine just did that

[Mota-vated]

Has anyone encountered a runtime error and their wallet just shut down on them?  Mine just did that

Something like that has happened to me when I tried using the "help" command in the "Debug Window". I tried opening up the wallet afterwards, and the error kept popping up. Tried restarting my PC, and it worked as it should with no errors. Might help with your problem as well. Might differ from the cause that I came across.

[NoobKidOnTheBlock]

Has anyone encountered a runtime error and their wallet just shut down on them?  Mine just did that

Something like that has happened to me when I tried using the "help" command in the "Debug Window". I tried opening up the wallet afterwards, and the error kept popping up. Tried restarting my PC, and it worked as it should with no errors. Might help with your problem as well. Might differ from the cause that I came across.

So I have to shutdown my computer and restart it again to get rid of that problem?

[Mota-vated]

Has anyone encountered a runtime error and their wallet just shut down on them?  Mine just did that

Something like that has happened to me when I tried using the "help" command in the "Debug Window". I tried opening up the wallet afterwards, and the error kept popping up. Tried restarting my PC, and it worked as it should with no errors. Might help with your problem as well. Might differ from the cause that I came across.

So I have to shutdown my computer and restart it again to get rid of that problem?

It's a possible temporary solution, until the error is triggered again by whatever caused it, or until the wallet is fixed. Then again, the cause of the error you received may be different than mine, so it may not be your solution. But it's worth a try if the error continues when trying to open your wallet.

[NoobKidOnTheBlock]

Hey Dev your new wallet has a runtime error in it that won't go away and keeps shutting down my wallet? I even tried deleting it and downloading it again and it just gives me the same error each and everytime? Could you please fix this pretty please

[snipsnoop]

I found I had to reboot the PC to get it running again. Possible a case of the QT library binaries not compiled statically. (I have had problems like that in the past)

[NoobKidOnTheBlock]

I found I had to reboot the PC to get it running again. Possible a case of the QT library binaries not compiled statically. (I have had problems like that in the past)

Well the reboot is going to have to wait because I have too many other things syncing and on the go right now to quit them all for a wallet that sometimes works Just saying

[feldenthorne]

For all who are looking for a Linux wallet:

I would highly suggest that you look at my changes at https://github.com/feldenthorne/XNAPos and compile from those sources. It's a lot of reading, but it was all necessary (or some derivative of what I did, anyway). Build from the official repository.

If you really can't build binaries yourself, you can use these: http://www.mediafire.com/download/r1jvi44ek4jd9rj/DeOxyRibose_qt_headless_2.0.0.0.7z. I haven't been able to stake with these builds, but at least it's the most up-to-date version.

Remember to scan for viruses! It's not worth it to trust other people's binaries with your money.

Edit: official repo is fixed for Linux

[tamara163]

Dev wrote you a private message
why don't you answer?

[ctgiant]

I can't get my old wallet to connect to burn coins.  I have it looking at the correct datadir and .conf file, but it still wont connect to more than 1 node, which is not updating.


I am assuming that we should be using 1.1.5, but I also tried the other 3 as well.  In light of this, I have a few questions:

1.Which version should we be using?
2.What nodes should we be connecting to?

Thanks in advance to anyone who knows and can help out.