[Official] ROKOS [flavors] Crypto Full node OS |IoT Devices |Feedback/Discussion

[Buchi-88]

Good day,

thanks for the software, but one question, how many Wallets can run on my Pi 2 (1GB RAM) at the same time without performance problems?

regards

Hi there, a pleasure.
If graphical wallets 2 depending on which coins, if daemons 3-5 depending on which coins.
(already synced of course as while syncing they use way more resources)

THX for your answer, on the Pi3 more Wallets (with GUI) at the same time possible or is the small RAM (1GB) the problem?

regards

[beeyaaaa]

so lets say i got my pi running with the rokos flavors os going....after i sync up my selected wallets how do transfer over my private keys and keep my stake weight?

hope that makes sense, i just want to move my wallets to my PI without having to actually send the coins to a new wallet...

[OKtoshi]

Good day,

thanks for the software, but one question, how many Wallets can run on my Pi 2 (1GB RAM) at the same time without performance problems?

regards

Hi there, a pleasure.
If graphical wallets 2 depending on which coins, if daemons 3-5 depending on which coins.
(already synced of course as while syncing they use way more resources)

THX for your answer, on the Pi3 more Wallets (with GUI) at the same time possible or is the small RAM (1GB) the problem?

regards

You are correct, the problem is directly the Ram size, hence can hold same quantity of wallets as previous model.
It responds faster because the faster processor but Ram did not get an upgrade this time. Maybe in future models.

[OKtoshi]

so lets say i got my pi running with the rokos flavors os going....after i sync up my selected wallets how do transfer over my private keys and keep my stake weight?

hope that makes sense, i just want to move my wallets to my PI without having to actually send the coins to a new wallet...

2 ways to do so:


1st) Check if the wallet you want to move comes from a db4.8.30 wallet version (from win, os or linux)

Wallets for ROKOS are built using the official db4.8.30, so if your wallet is already on the standard then you can just make a backup of it and move the wallet directly to ROKOS (to its proper coin folder).


else if the db is not compatible:


2nd) then you can dump your private keys from the main wallet and import them to the new wallet.

Most clients supports import and export of private keys with importprivkey / dumpprivkey

use is easy, just go to your main wallet debugg console and:

- dumpprivkey <coinaddress>

(write down the private key you get, you will need it to import it to the new wallet.)

and then go to your new wallet and:

- importprivkey <privatekeyyougotfrompreviousstep>

[beeyaaaa]

so lets say i got my pi running with the rokos flavors os going....after i sync up my selected wallets how do transfer over my private keys and keep my stake weight?

hope that makes sense, i just want to move my wallets to my PI without having to actually send the coins to a new wallet...

2 ways to do so:


1st) Check if the wallet you want to move comes from a db4.8.30 wallet version (from win, os or linux)

Wallets for ROKOS are built using the official db4.8.30, so if your wallet is already on the standard then you can just make a backup of it and move the wallet directly to ROKOS (to its proper coin folder).


else if the db is not compatible:


2nd) then you can dump your private keys from the main wallet and import them to the new wallet.

Most clients supports import and export of private keys with importprivkey / dumpprivkey

use is easy, just go to your main wallet debugg console and:

- dumpprivkey <coinaddress>

(write down the private key you get, you will need it to import it to the new wallet.)

and then go to your new wallet and:

- importprivkey <privatekeyyougotfrompreviousstep>

Very informative and helpful thanks! Also is there a detailed explanation somewhere on how to expand the storage on the raspberry pi?

[OKtoshi]

New OK BTC Communications Discord Server

OK is always evolving, this time we found the best and permanent communications channels for the Okcash Community

With support channels for Okcash and Rokos Bitcoin Fullnode among others.
Feel free to move from IRC / Slack and start joining the OK Discord: http://discord.gg/grvpc8c 



Among the different new features now you can:

- Rank within community interactions, and win OK and prizes in the future.
- Request songs over the OK Radio channel.
- Direct voice communication channels (good bye Skype).
- Smart bots. (Trivia, Music, Rss, Social, etc)
- OK Tipbot to be implemented in the coming weeks.
- Roles for better organization.
- Support channels for OK and Rokos.
- Trading channels for Bitcoin, Okcash and Doge.
- Channel for faucets, games and giveaways.
- Channel for any other altcoins trading.
- Ease of access, no need of "send our invites for signup" more user friendly "irc" style.
- Every member can make their own invitations for the server and get registers of how many joined from your invites.
- Permanent and Temporary invites.
- Everyone can join.
- Gaming channels.
- Status update based on games/apps being used. (optionals)
- Web access and multiplatform apps. (Win, Linux, MacOS, iOS, Android)
- Less resources hungry than all the other communication apps.
- Real Online/Offline markers.
- Private channels for developers brainstorm, Projects planning and cross collabs.
- Announcement channels and Dev-update channels to get the latest news.
- 10,000 users capacity.
- No capped logs.
- Slow modes capable.
- Open Api's.
- Movable server. (USA-Australia-Europe-Asia)
- And a ton of new features waiting for your to join at: http://discord.gg/grvpc8c and discover them.

Want to learn more about OK, want to integrate and participate, looking for support,
or requests some songs to the station, or simply hang out and have some fun,
now you can do all at once over the Discord Okcash: http://discord.gg/grvpc8c

[OKtoshi]

Foss Force Acknowledges Cryptocurrency-based ROKOS OK Operating System

http://themerkle.com/foss-force-acknowledges-cryptocurrency-based-rokos-operating-system-for-raspberry-pi/

http://fossforce.com/2016/07/alternatives-raspbian-ubuntu-mate/

[cryptonit]

https://github.com/BitcoinFullnode/ROKOS-OK-Bitcoin-Fullnode/issues/5

please update the DMD ROKOS client to 2.1.0.4
as we found out its not a optional but a mandatory update!

and some infos about next rokos release would be nice too

[welshy9]

love this ,

quick question tho how do you change the data dir if i was to store on a external hard drive please for bitcoin

Thanks buddy

[rmd73]

love this ,

quick question tho how do you change the data dir if i was to store on a external hard drive please for bitcoin

Thanks buddy

As per https://bitcointalk.org/index.php?topic=1084908.msg13029601#msg13029601

In the wallet you want to use, add this command to the end to start the wallet

 -datadir=/home/datadirexample

So, if you mounted the external HDD to /media/yourhddmountpoint you will have to modify the launcher (the "shortcut") of bitcoin-qt to have

Code:

bitcoin-qt -datadir=/media/yourhddmountpoint

[altsheets]

is there an ETA for v7 ?

[rmd73]

is there an ETA for v7 ?

Soon^TM
I had the honor (and the privilege) to test a pre-release version of ROKOS Core v7 for Pine64 and I can tell that it is a good distro and the OKcash wallet seems to be working pretty well.
There are some minor issues with the "instant sync" script to be ironed out (which is basically using a full database snapshot of the blockchain, as opposed to the "bootstrap" which is more like a database "import"), but as far as I can tell the bootstrap method works well.
I didn't have the time to test the BTC wallet nor any of the two daemons yet.
If everything goes well, I think we can see the ROKOS v7 launched next week...
Oh, it seems to have both WiFi and Bluetooth active out of the box for those who acquired the corresponding module/shield for their Pine (still need to test those two though).
Watch this thread and the discord channel at https://discord.gg/sfxUARd for more exciting news.

[OKtoshi]

from: http://okcashtalk.org/index.php/topic,1916.0.html
ROKOS v7 "Core" for Raspberry Pi 2, 3 IoT Devices Released.

-- ROKOS v7 Flavors is getting build and should get released in the coming weeks.

OS with integrated Bitcoin OK Clients, nodes and much more. Faster, Easier, Stronger.


http://rokos.space

Just Download and Burn to Start your own OK and/or Bitcoin Full nodes and/or open your OpenBazaar store

Cryptocurrency and the Internet of Things
Core: Debian/Xubuntu based OS with integrated Bitcoin OK Clients, Nodes and Open Bazaar server ready for use.

We've seen new services selling "stake miners" or pi "fullnodes" for different amounts of bitcoin ranging from 200 USD to 982 USD, we support the new technology and uses for cryptocurrencies in the Raspberry Pi , Bananapi, Pine64+ and IoT environments, hence we came up with a Free solution for every IoT enthusiast, developer, user, service that want to use their IoT devices with Bitcoin and OK, or that would like to turn their Pi into a Staking device, It already integrates a fully functional Bitcoin Client and full node as well to provide the users with the best and easier Out of the Box experience, and to be the perfect toolbox for developers.

v7 "Core" Released

ROKOS is the First OS release that merges the full power of Raspberry Pi zero, 2, 3, Banana Pi PRO, Pine64+ & IoT Devices with Bitcoin OK and Cryptocurrencies:
- ROKOS v7 "core" comes with integrated OK and Bitcoin Client / node and OpenBazaar server.

Distribution aimed for everyone, from new IoT users to IoT Developers, Ease of use Out of the Box.
Download & Burn, Ready for use.

Some of the ROKOS core features are:
v7 "core" Release (Pine64+, Raspberry Pi 2, 3)
- Full burnable OS Compatible with the Raspberry Pi, Pine64+, BananaPi and IoT devices.
- Full System / Programs Upgrade.
- Full Design Upgrade.
- Chrome/Firefox browser added. (depends on version)
- Autolog.
- Debian/Xubuntu/Linux based.
- Java Dev Tools.
- Easier to Use mod Update.
- Security and Optimization Update.
- Includes Qt and complete set of Dev tools (For developers)
- Works with other cryptocurrencies.
- 1024 mb swap mod.
- Updated Bitcoin client / node v0.13.1 with full functionality.
- Updated OKCash client / node v4.0.0.3 with full Stake functionality, private messages.
- Updated OpenBazaar server.
- Custom Login and Wallpapers.
- BTC and OK nodes at /usr/local/bin/
- Easy Clients / Nodes Upgrades.
- Custom OK-Scripts to ease the user experience.
- Direct access to the Clients Via: Task bar and Menu > Blockchain.

Requirements:
ROKOS v7 "core" :
- Pine64+ - ready for download
- Raspberry Pi 2, 3. - ready for download
- Banana Pi PRO - coming update

- Min 16gb SD card and an External device (usb / hdd / ssd). To sync the BTC chain on the external device instead of the SD card, BTC chain alone is around 60gb.

ROKOS constantly evolves and releases new Versions based on:
- Security, Chain, Technology and Design updates.
- Ease of access and use for the final users.
- More Cryptocurrencies are integrated for an Out of the Box experience in a different version called ROKOS FLAVORS.
- More wallets, programs or features, based on users/communities/developers feedback, support and/or cross collaborations.

Download at: http://rokos.space/downloads.html

New ROKOS v7 core for Pine64+ IoT devices Released

Visit the ROKOS website at: http://rokos.space



ROKOS v7 "Core" for Pine64+ IoT Devices Released. Full Bitcoin OK Clients, nodes and much more. Faster, Easier, Stronger.

Just Download and Burn to Start your own OK and/or Bitcoin Full nodes and/or open your OpenBazaar store

Cryptocurrency and the Internet of Things
Core: Debian based OS with integrated Bitcoin OK Clients, Nodes and Open Bazaar server ready for use.

We've seen new services selling "stake miners" or pi "fullnodes" for different amounts of bitcoin ranging from 200 USD to 982 USD, we support the new technology and uses for cryptocurrencies in the Raspberry Pi , Bananapi, Pine64+ and IoT environments, hence we came up with a Free solution for every IoT enthusiast, developer, user, service that want to use their IoT devices with Bitcoin and OK, or that would like to turn their Pi into a Staking device, It already integrates a fully functional Bitcoin Client and full node as well to provide the users with the best and easier Out of the Box experience, and to be the perfect toolbox for developers.

v7 "Core" Released

The First OS image release that merges the full power of Raspberry Pi zero, 2, 3, Banana Pi PRO, Pine64+ & IoT Devices with Bitcoin OK and Cryptocurrencies:
- ROKOS v7 "core" comes with integrated OK and Bitcoin Client / node and OpenBazaar server.

Distribution aimed for everyone, from new IoT users to IoT Developers, Ease of use Out of the Box.
Download & Burn, Ready for use.

New Versions:

October 28th 2016

For Pine64+ :

ROKOS v7 "core" for Pine64+ IoT Device - Download (2.2 Gb)
Oct 28 2016
MD5 Checksum: 48ED3DE198F6416C578F3BB02F6B50D2
SHA-1 Checksum: 5DCFC8A0D83CFC5F90731B7508FBEB457C8892AE
SHA-256 Checksum: 70FED6DB88ECB7F01344D66F6F337A6BC9FFD6D5CF22A1801768CA83979029CB
SHA-512 Checksum: 8837F4E12D3156033E88D9D86C4860F4A4CBBE2B8279A2D4F3B1ED062A6EE715DEA31877F1F8A53 D5B1284C7DBBF843DD2E4CD1B8CF34493E14698C26D123882

ROKOS v7 core for Raspberry Pi zero, 2, 3, and BananaPi coming up.

ROKOS History releases link.

*Official Download Links - Do Not Download from other sources, posts, links to ensure the security of your downloads*

Specs:

v7 "core" Release (Pine64+) Oct 28 2016
- Full burnable OS Compatible with the Raspberry Pi, Pine64+, BananaPi and IoT devices.
- Full System / Programs Upgrade.
- Full Design Upgrade.
- Chrome browser added.
- Autolog.
- Debian.
- Java Dev Tools.
- Easier to Use mod Update.
- Security and Optimization Update.
- Includes Qt and complete set of Dev tools (For developers)
- Works with other cryptocurrencies.
- 1024 mb swap mod.
- Updated Bitcoin client / node v0.13.0 with full functionality.
- Updated OKCash client / node v4.0.0.1 with full Stake functionality, private messages.
- Updated OpenBazaar server.
- Custom Login and Wallpapers.
- BTC and OK nodes at /usr/local/bin/
- Easy Clients / Nodes Upgrades.
- Custom OK-Scripts to ease the user experience.
- Direct access to the Clients Via: Task bar and Menu > Blockchain.
- ZIP file - Compression: 2.2 Gb image to download (Pine64+).
- nodejs included.

Requirements:
ROKOS v7 "core" for Pine64+ :
- Pine64+ - ready for download
- Raspberry Pi zero, 2, 3. - coming update
- Banana Pi PRO - coming update

- Min 16gb SD card and an External device (usb / hdd / ssd). To sync the BTC chain on the external device instead of the SD card, BTC chain alone is around 60gb.


Future Versions:
- Security updates.
- Chain Updates.
- More Cryptocurrencies are integrated for an Out of the Box experience in a different version called ROKOS FLAVORS.
- Designs Updates.
- More wallets, programs or features, based on users/communities/developers feedback, support and/or cross collaborations.

ROKOS v7 "core" for Pine64+ screen shots

"ROKOS" Initial Setup

Steps for first boot

*Pine64+
User: pi  / Password: rokos , follow normal setup.

a) Login and open a terminal.
b) type:      sudo ./resize-sdcard.sh       (this will resize and use all the space from the SD card)
c) System ready for use.

Extra info command to auto-sync the OKCash chain in minutes:

a) Open terminal.
b) type:         ./ok-sync-arm64.sh           (this will download and unzip the latest ok-blockchain snapshot to the okcash datafolder for Pine64+ devices)
c) start your wallet after the process is done and give it some minutes.
d) your OK wallet is ready to be used.

Done, enjoy your ROKOS v7

*BananaPi PRO:    (v7 update coming up)

*Raspberry Pi:    (v7 update coming up)

Welcome to the ROKOS Desktop

Final steps / BTC and OK Clients

a) Go to Menu > Blockchain and Click on the Bitcoin Wallet

This will open the Bitcoin wallet with the option to select where we will be saving the BTC chain.

*For BTC the initial sync will take some days, wallets are fully usable after being fully Synchronized.

b) Always remember to make constant backups of your wallets and save them in USB or external media.

Use your Bitcoin wallet to plug HW and mine BTC, Send/Receive Bitcoin,
become a full node and support the Bitcoin network, develop new applications,
etc, the limit is only in your imagination.


Important Security Notice:
*) Remember to create a backup for your Wallets, you can use the wallets to create them and save in different folders on a USB device.
You should ALWAYS have a backup of your wallet, Pine64+, Raspberry Pi and IoT Hardware, Debian and ROKOS Software are under development hence not responsible for missuses, electrical or compatibility issues that might cause a loss of information. It is as secure as one's ability to take care for it, same as a computer, so always have a backup of your wallets on an external device.

*) Some people tend to recommend getting a 128Gb MicroSD HC (High speed) , at the same time it does work, We do not recommend this solution, as microSD cards tend to get corrupted by the number of overwrites, to ensure the best functionality and security you should use an external HDD/USB storage device to store the chain.

You can start testing and developing new integration with the Bitcoin and OK Tech for your IoT projects.

***********************

ROKOS is Released for Free to support Bitcoin OK and the crypto environment adoption
If you find this work valuable or if it helped your project and You would like to support feel free to share your donations at

BTC  15VrDkat5vD4FfycRk3E4e7EgqftzK6tm8
OK  PWZg5F7NurKDNGdckRpQgmShEQhEHmF5W5

If require further assistance or want to provide your feedback directly feel free to join:  http://discord.me/cryptocurrency
or Contact: OKtoshi at devteam@okcash.co

Bitcoin Client on ROKOS v7 "core"

"Empower yourself and build your own Bitcoin and Cryptocurrencies Fullnode Guide"

ROKOS Guides from zero! Full steps for New Users

1.- How to burn the ROKOS .img to the SDcard:  http://rokos.space/burn_sdcard.html

2.- First steps on ROKOS v7 core for Pine64+ :  http://rokos.space/rokos_core.html

3.- Join the community and support channels at: http://discord.me/cryptocurrency

ENJOY THIS AWESOME OPERATING SYSTEM!

[ultralord]

How can I add other wallets to Magic Flavors? Is there a tutorial posted anywhere?

[OKtoshi]

How can I add other wallets to Magic Flavors? Is there a tutorial posted anywhere?

https://github.com/BitcoinFullnode/ROKOS-OK-Bitcoin-Fullnode

http://discord.me/cryptocurrency

[pawlo74]

Hi, what is a password for root account in "ROKOS" Flavors for Raspberry Pi zero, 2, 3 - Initial Setup User: root / Password: raspberry (use for initial configuration and advanced changes)? raspberry does not work.

And second how to setup LCD screen on rokos?

[FFI2013]

from: http://okcashtalk.org/index.php/topic,1916.0.html
ROKOS v7 "Core" for Raspberry Pi 2, 3 IoT Devices Released.

-- ROKOS v7 Flavors is getting build and should get released in the coming weeks.

OS with integrated Bitcoin OK Clients, nodes and much more. Faster, Easier, Stronger.


http://rokos.space

Just Download and Burn to Start your own OK and/or Bitcoin Full nodes and/or open your OpenBazaar store

Cryptocurrency and the Internet of Things
Core: Debian/Xubuntu based OS with integrated Bitcoin OK Clients, Nodes and Open Bazaar server ready for use.

We've seen new services selling "stake miners" or pi "fullnodes" for different amounts of bitcoin ranging from 200 USD to 982 USD, we support the new technology and uses for cryptocurrencies in the Raspberry Pi , Bananapi, Pine64+ and IoT environments, hence we came up with a Free solution for every IoT enthusiast, developer, user, service that want to use their IoT devices with Bitcoin and OK, or that would like to turn their Pi into a Staking device, It already integrates a fully functional Bitcoin Client and full node as well to provide the users with the best and easier Out of the Box experience, and to be the perfect toolbox for developers.

v7 "Core" Released

ROKOS is the First OS release that merges the full power of Raspberry Pi zero, 2, 3, Banana Pi PRO, Pine64+ & IoT Devices with Bitcoin OK and Cryptocurrencies:
- ROKOS v7 "core" comes with integrated OK and Bitcoin Client / node and OpenBazaar server.

Distribution aimed for everyone, from new IoT users to IoT Developers, Ease of use Out of the Box.
Download & Burn, Ready for use.

Some of the ROKOS core features are:
v7 "core" Release (Pine64+, Raspberry Pi 2, 3)
- Full burnable OS Compatible with the Raspberry Pi, Pine64+, BananaPi and IoT devices.
- Full System / Programs Upgrade.
- Full Design Upgrade.
- Chrome/Firefox browser added. (depends on version)
- Autolog.
- Debian/Xubuntu/Linux based.
- Java Dev Tools.
- Easier to Use mod Update.
- Security and Optimization Update.
- Includes Qt and complete set of Dev tools (For developers)
- Works with other cryptocurrencies.
- 1024 mb swap mod.
- Updated Bitcoin client / node v0.13.1 with full functionality.
- Updated OKCash client / node v4.0.0.3 with full Stake functionality, private messages.
- Updated OpenBazaar server.
- Custom Login and Wallpapers.
- BTC and OK nodes at /usr/local/bin/
- Easy Clients / Nodes Upgrades.
- Custom OK-Scripts to ease the user experience.
- Direct access to the Clients Via: Task bar and Menu > Blockchain.

Requirements:
ROKOS v7 "core" :
- Pine64+ - ready for download
- Raspberry Pi 2, 3. - ready for download
- Banana Pi PRO - coming update

- Min 16gb SD card and an External device (usb / hdd / ssd). To sync the BTC chain on the external device instead of the SD card, BTC chain alone is around 60gb.

ROKOS constantly evolves and releases new Versions based on:
- Security, Chain, Technology and Design updates.
- Ease of access and use for the final users.
- More Cryptocurrencies are integrated for an Out of the Box experience in a different version called ROKOS FLAVORS.
- More wallets, programs or features, based on users/communities/developers feedback, support and/or cross collaborations.

Download at: http://rokos.space/downloads.html

New ROKOS v7 core for Pine64+ IoT devices Released

Visit the ROKOS website at: http://rokos.space



ROKOS v7 "Core" for Pine64+ IoT Devices Released. Full Bitcoin OK Clients, nodes and much more. Faster, Easier, Stronger.

Just Download and Burn to Start your own OK and/or Bitcoin Full nodes and/or open your OpenBazaar store

Cryptocurrency and the Internet of Things
Core: Debian based OS with integrated Bitcoin OK Clients, Nodes and Open Bazaar server ready for use.

We've seen new services selling "stake miners" or pi "fullnodes" for different amounts of bitcoin ranging from 200 USD to 982 USD, we support the new technology and uses for cryptocurrencies in the Raspberry Pi , Bananapi, Pine64+ and IoT environments, hence we came up with a Free solution for every IoT enthusiast, developer, user, service that want to use their IoT devices with Bitcoin and OK, or that would like to turn their Pi into a Staking device, It already integrates a fully functional Bitcoin Client and full node as well to provide the users with the best and easier Out of the Box experience, and to be the perfect toolbox for developers.

v7 "Core" Released

The First OS image release that merges the full power of Raspberry Pi zero, 2, 3, Banana Pi PRO, Pine64+ & IoT Devices with Bitcoin OK and Cryptocurrencies:
- ROKOS v7 "core" comes with integrated OK and Bitcoin Client / node and OpenBazaar server.

Distribution aimed for everyone, from new IoT users to IoT Developers, Ease of use Out of the Box.
Download & Burn, Ready for use.

New Versions:

October 28th 2016

For Pine64+ :

ROKOS v7 "core" for Pine64+ IoT Device - Download (2.2 Gb)
Oct 28 2016
MD5 Checksum: 48ED3DE198F6416C578F3BB02F6B50D2
SHA-1 Checksum: 5DCFC8A0D83CFC5F90731B7508FBEB457C8892AE
SHA-256 Checksum: 70FED6DB88ECB7F01344D66F6F337A6BC9FFD6D5CF22A1801768CA83979029CB
SHA-512 Checksum: 8837F4E12D3156033E88D9D86C4860F4A4CBBE2B8279A2D4F3B1ED062A6EE715DEA31877F1F8A53 D5B1284C7DBBF843DD2E4CD1B8CF34493E14698C26D123882

ROKOS v7 core for Raspberry Pi zero, 2, 3, and BananaPi coming up.

ROKOS History releases link.

*Official Download Links - Do Not Download from other sources, posts, links to ensure the security of your downloads*

Specs:

v7 "core" Release (Pine64+) Oct 28 2016
- Full burnable OS Compatible with the Raspberry Pi, Pine64+, BananaPi and IoT devices.
- Full System / Programs Upgrade.
- Full Design Upgrade.
- Chrome browser added.
- Autolog.
- Debian.
- Java Dev Tools.
- Easier to Use mod Update.
- Security and Optimization Update.
- Includes Qt and complete set of Dev tools (For developers)
- Works with other cryptocurrencies.
- 1024 mb swap mod.
- Updated Bitcoin client / node v0.13.0 with full functionality.
- Updated OKCash client / node v4.0.0.1 with full Stake functionality, private messages.
- Updated OpenBazaar server.
- Custom Login and Wallpapers.
- BTC and OK nodes at /usr/local/bin/
- Easy Clients / Nodes Upgrades.
- Custom OK-Scripts to ease the user experience.
- Direct access to the Clients Via: Task bar and Menu > Blockchain.
- ZIP file - Compression: 2.2 Gb image to download (Pine64+).
- nodejs included.

Requirements:
ROKOS v7 "core" for Pine64+ :
- Pine64+ - ready for download
- Raspberry Pi zero, 2, 3. - coming update
- Banana Pi PRO - coming update

- Min 16gb SD card and an External device (usb / hdd / ssd). To sync the BTC chain on the external device instead of the SD card, BTC chain alone is around 60gb.


Future Versions:
- Security updates.
- Chain Updates.
- More Cryptocurrencies are integrated for an Out of the Box experience in a different version called ROKOS FLAVORS.
- Designs Updates.
- More wallets, programs or features, based on users/communities/developers feedback, support and/or cross collaborations.

ROKOS v7 "core" for Pine64+ screen shots

"ROKOS" Initial Setup

Steps for first boot

*Pine64+
User: pi  / Password: rokos , follow normal setup.

a) Login and open a terminal.
b) type:      sudo ./resize-sdcard.sh       (this will resize and use all the space from the SD card)
c) System ready for use.

Extra info command to auto-sync the OKCash chain in minutes:

a) Open terminal.
b) type:         ./ok-sync-arm64.sh           (this will download and unzip the latest ok-blockchain snapshot to the okcash datafolder for Pine64+ devices)
c) start your wallet after the process is done and give it some minutes.
d) your OK wallet is ready to be used.

Done, enjoy your ROKOS v7

*BananaPi PRO:    (v7 update coming up)

*Raspberry Pi:    (v7 update coming up)

Welcome to the ROKOS Desktop

Final steps / BTC and OK Clients

a) Go to Menu > Blockchain and Click on the Bitcoin Wallet

This will open the Bitcoin wallet with the option to select where we will be saving the BTC chain.

*For BTC the initial sync will take some days, wallets are fully usable after being fully Synchronized.

b) Always remember to make constant backups of your wallets and save them in USB or external media.

Use your Bitcoin wallet to plug HW and mine BTC, Send/Receive Bitcoin,
become a full node and support the Bitcoin network, develop new applications,
etc, the limit is only in your imagination.


Important Security Notice:
*) Remember to create a backup for your Wallets, you can use the wallets to create them and save in different folders on a USB device.
You should ALWAYS have a backup of your wallet, Pine64+, Raspberry Pi and IoT Hardware, Debian and ROKOS Software are under development hence not responsible for missuses, electrical or compatibility issues that might cause a loss of information. It is as secure as one's ability to take care for it, same as a computer, so always have a backup of your wallets on an external device.

*) Some people tend to recommend getting a 128Gb MicroSD HC (High speed) , at the same time it does work, We do not recommend this solution, as microSD cards tend to get corrupted by the number of overwrites, to ensure the best functionality and security you should use an external HDD/USB storage device to store the chain.

You can start testing and developing new integration with the Bitcoin and OK Tech for your IoT projects.

***********************

ROKOS is Released for Free to support Bitcoin OK and the crypto environment adoption
If you find this work valuable or if it helped your project and You would like to support feel free to share your donations at

BTC  15VrDkat5vD4FfycRk3E4e7EgqftzK6tm8
OK  PWZg5F7NurKDNGdckRpQgmShEQhEHmF5W5

If require further assistance or want to provide your feedback directly feel free to join:  http://discord.me/cryptocurrency
or Contact: OKtoshi at devteam@okcash.co

Bitcoin Client on ROKOS v7 "core"

"Empower yourself and build your own Bitcoin and Cryptocurrencies Fullnode Guide"

ROKOS Guides from zero! Full steps for New Users

1.- How to burn the ROKOS .img to the SDcard:  http://rokos.space/burn_sdcard.html

2.- First steps on ROKOS v7 core for Pine64+ :  http://rokos.space/rokos_core.html

3.- Join the community and support channels at: http://discord.me/cryptocurrency

ENJOY THIS AWESOME OPERATING SYSTEM!

I have the pi B I tried rokos core and it doesn't boot so I went back to flavors I downloaded it again hoping the wallet would be updated and they aren't so I followed the guide in github and everytime I tried okcash will not open is there anyway u could update the wallets in flavors v6 or tell me so other way I even tried to download the rasp wallet on okcash and no luck Thank You

[OKtoshi]

Raspberry pi models b+ has 512mb ram, ROKOS supports IoT devices with more than 1Gb ram,
I would recommend:

a) upgrade and get a Pi 2 at least.
b) wait for the ROKOS lite Release (headless version for pi zero and old pi models)

also feel free to join http://discord.me/cryptocurrency for support/feedback and latest updates. Kind Regards

[FFI2013]

Raspberry pi models b+ has 512mb ram, ROKOS supports IoT devices with more than 1Gb ram,
I would recommend:

a) upgrade and get a Pi 2 at least.
b) wait for the ROKOS lite Release (headless version for pi zero and old pi models)

also feel free to join http://discord.me/cryptocurrency for support/feedback and latest updates. Kind Regards

K that's what I figured plus it's slow as a turtle I'll order one again Thanks

[tdokta]

hi
i have downloaded rokos flavors now twice, both times the zip file wont unpack. getting the cpgz.zip .. terminal tells me that the file is 76bytes too long. using mac osx mavericks

there is also no preview of the file given on google drive either.

is there a version somewhere else that i can download or any advice on this?

thanks