[ANN] [PI metal detector private shares with 50% profits] by alcurEX CEO

[jamesjde]

Hello halibit,

Have you returned from Australia?

[halibit]

Hello halibit,

Have you returned from Australia?

Yes, I just came back 
I'll make report and how to continue project soon..

[jamesjde]

Hello halibit,

Have you returned from Australia?

Yes, I just came back 
I'll make report and how to continue project soon..

Hello halibit,

I don't wish to be pushy, but how soon is soon?
Good or bad, we would like to know the outcome of the expedition.
In your last blog post, you had found 200 mg of gold and then you left Australia this past Saturday or Sunday - apparently after only three weeks and not 30 days.

Also, will you be canceling the outstanding sell order for the 5046 remaining shares now that the trip is over?

Thank you

[halibit]

Here is short answer about trip:

I got good experience about gold fields on Australia and what kind of detector is needed in there.

Current market situation:
Currently there is only one model what people want to use in AU.
Minelab GP series detectors. (Few Garrets maybe sold also)
There can buy other models as well but I see no one don't buy or rent it.

Any way there is two big issues with Minelab PI detectors.
1. Metal trash
Gold leads in VIC area are full of metal trash, it makes gold detecting extremely hard.
And because hot iron ground there is impossible use VLF detectors (VLF can separate metal types but can't use on iron ground) PI detector is only choice to use.
This is number one problem.

2. search depth and area.
Gold leads are big area but prospected many many times.
Sweeping area with 20cm coil, it may take several months or years to find anything bigger.
Usually tourists not found gold on 1-2 weeks holiday.

$5000 investing per Minelab device is some kind of  issue as well.

Project continuing plan:
I propose we change our product plan a little more advance.
For selling product in Australia, we need to make better model.

Short explanation about how I plan to make our detector working:
We will use PI model with auto ground balance of course.

Then with programmed PIC we will make three advance properties for PI circuit
1. Metal trash filtering.
Only few PI detectors even try to filtering iron now.
My plan is made iron filtering using at least target size and depth filter (this will filter cans and other big metals near of surface)
Other more advanced method: Target response with different pulse frequency and time.
This one is not ever designed but technically maybe possible.
This is most hardest part and I need to make several tests and learn more before I can say more about it.

2. Depth performance:
This can make with boosting signal.
Normally low signal (target is small and deep) can't pick up because it can be just weak ground noise vary as well.
With boost Program we can check low signal on several time. If signal is stable same on every time, we can say it is possible small target deeper.
Also boost program will check signal length and form and can filter small hot ground spots near on surface out (deep and weak signal is short and signal time curve is opposite way than near surface hot rock target signal).

3. Expanding searching area
At first I plan to use double coils, but with program we may add more.
Coil timing program will listen coil and then close it, open another coil and so on.
There is no limit for coil number, but 6 small sniper coils may be still light to use.

I'm also curious for testing multiple frequency in one sweep for best result.

All programs can write in one or two PICs.
Locked PICs will also protect our model.

Of course we can start selling cheaper model as well. Only gold search with heavy ironed soil will need more advance system.

[SISAR]

I'm checking this thread every day expecting some update but ...

[Riseman]

halibit, can you share your plans with us, please? Have you finished designing the prototype? When do you expect to start production?

[RaginglikeaBoss]

I have got to keep this revolutionary idea on the first page.  This is basically what Satoshi had in mind when he created Bitcoin.

1) Metal detectors or gold or something relating to neither or both.
2)
3) Profit.

Quite frankly I don't see how this could ever fail.

http://giant.gfycat.com/FoolhardySmartDobermanpinscher.gif

[halibit]

halibit, can you share your plans with us, please? Have you finished designing the prototype? When do you expect to start production?

No I have not finish new prototype yet.
This may take while.
I don't want to start selling unfinished model.
But as I wrote, concept is ready, just need a lot work.

If you want, we can start selling fast&cheap model but honestly it can't find nuggets as minelab (on iron ground).
It might be bad reputation to start with that...
I really want people will find gold with our model.

Can't say ETA for new model, but I will start with it on next week.

[jimblasko]

halibit, can you share your plans with us, please? Have you finished designing the prototype? When do you expect to start production?

No I have not finish new prototype yet.
This may take while.
I don't want to start selling unfinished model.
But as I wrote, concept is ready, just need a lot work.

If you want, we can start selling fast&cheap model but honestly it can't find nuggets as minelab (on iron ground).
It might be bad reputation to start with that...
I really want people will find gold with our model.

Can't say ETA for new model, but I will start with it on next week.

No offense but I don't think competing with Garrets, Whites, or Fisher is not even possible let alone Minelabs.

If gold is what you want to find, just buy any Minelabs detector over $1000.00 starting with this one http://www.kellycodetectors.com/products/gold/na237-33160005/eureka-gold 

Anything over $1000 will have auto ground balance and deal with heavy mineralized ground the best. I personally have found gold with this Gold Eureka model, but I will be upgrading to this one in the next few months.  http://www.kellycodetectors.com/products/all-purpose/na237-32280101/ctx-3030-standard-with-wireless-headphones

[halibit]

halibit, can you share your plans with us, please? Have you finished designing the prototype? When do you expect to start production?

No I have not finish new prototype yet.
This may take while.
I don't want to start selling unfinished model.
But as I wrote, concept is ready, just need a lot work.

If you want, we can start selling fast&cheap model but honestly it can't find nuggets as minelab (on iron ground).
It might be bad reputation to start with that...
I really want people will find gold with our model.

Can't say ETA for new model, but I will start with it on next week.

No offense but I don't think competing with Garrets, Whites, or Fisher is not even possible let alone Minelabs.

If gold is what you want to find, just buy any Minelabs detector over $1000.00 starting with this one http://www.kellycodetectors.com/products/gold/na237-33160005/eureka-gold  

Anything over $1000 will have auto ground balance and deal with heavy mineralized ground the best. I personally have found gold with this Gold Eureka model, but I will be upgrading to this one in the next few months.  http://www.kellycodetectors.com/products/all-purpose/na237-32280101/ctx-3030-standard-with-wireless-headphones

Cant say nothing about CTX-3030 model, but currently on Australia there is not many who even want to use other than minelab GPX or similar series models for prospecting gold. (+3000$ devices)
VLF detectors are useless in there.

You might be right about competing with those models, but I will make model ready at first and then we will see how and where to start marketing it.

[popcorn75]

We need updates.

[SISAR]

We need updates.

+1

Also website password recovery functionality is broken, I can request reset but I never receive email of any kind so now I can not login or reset password.

[TotalPanda]

Where is the wallet ?

[jimblasko]

I can make the coin, windows and linux wallets, I would do it for one of those minelab gold eureka metal detectors 

[jimblasko]

Here's my Bitcoin Address for nothing else but this project: 1BygKAtmK9sAfExuTRGypQVNoCMy69FysT

Donate enough BTC to cover that minelabs metal detector and I'll build the coin and support it :-)


Keep Track of the balance here: https://blockchain.info/address/1BygKAtmK9sAfExuTRGypQVNoCMy69FysT

[halibit]

Where is the wallet ?

Wallet is not created yet for that project.
When new model is ready and if shareholders want to, I can make public wallet for shares (PoS with almost zero stake).

About IPO situation:
There is 5K unsold shares left and because no volume, I will take it out from order list, so everyone can trade shares freely under or over IPO price.

Rest of 5K shares will be offered again after detector model is ready, but with 10X higer price.
More fair for early investors.

About device itself:
Main circuit is ready planned and most of components will come on next week.
With main circuit I can build basic model.
It can handle 20ns cycle. (over 50% faster than regular pulse rate)

When faster diodes, mosfets, opamps will come, I can start building our goal model 4-6ns pulse cycle.
(Faster pulse can pick signal from smaller metal objects and makes possible to search it deeper)
Have to say those components are not cheap, but we can live with it.
Those will rise costs about 120$.

Then need to build module for separate different waves.
But this part I can design after I see basic model on action.

[SISAR]

We need updates.

+1

Also website password recovery functionality is broken, I can request reset but I never receive email of any kind so now I can not login or reset password.

And what about issue as explained in quoted post?

[jamesjde]

Where is the wallet ?

About device itself:
Main circuit is ready planned and most of components will come on next week.
With main circuit I can build basic model.
It can handle 20ns cycle. (over 50% faster than regular pulse rate)

Hello Halibit,

Have you now constructed the basic model?
Also, how will you be marketing it?

Thank you.

[halibit]

Where is the wallet ?

About device itself:
Main circuit is ready planned and most of components will come on next week.
With main circuit I can build basic model.
It can handle 20ns cycle. (over 50% faster than regular pulse rate)

Hello Halibit,

Have you now constructed the basic model?
Also, how will you be marketing it?

Thank you.

About model:
I'm on half way with circuit.
Power supply and transmitter are ready.
I made it so wave duration, length and frequency can change.
Next is receiver circuit.. and then need to balance faster coil than I have ever seen used with PI.
(Need to be low noise components and coil self resonance)

Hoping you have patience to wait because I really try to make this well.

About marketing:
My plan is send samples to some resellers and they can test it in real life.
If they will get better result with our device than any other one, I'm pretty sure they will start sell it.
But also I will build webshop for it.
And if I'll get time on next summer, I will go to Lapland gold field.
It is place where is only extremely tiny nuggets.
Nice challenge for any device.

edit:
Forgot to say...
Would be nice if send model to some tech magazine who testing devices.
But lets make it ready at first

[jamesjde]

Hello Halibit,

How is the model progressing?
Have you finished the receiver circuit?

Thanks

About model:
I'm on half way with circuit.
Power supply and transmitter are ready.
I made it so wave duration, length and frequency can change.
Next is receiver circuit.. and then need to balance faster coil than I have ever seen used with PI.
(Need to be low noise components and coil self resonance)