GSYTeam (OP)
|
|
November 03, 2015, 02:12:51 AM |
|
I'm glad to see that this coin is finally getting the attention it deserves, I was starting to feel kinda lonely in this thread do u get some sort of indication the skynode is running? My status is blank. I get an error when starting one : ERROR COULD NOT ALLOCATE VIN FOR COLLATERALEADDRESS i sent the 2k to the address yesterday, weird. Do you need to consider the fee for the transaction when sending the 2k to yourself? You need to run Skynode on a non-staking Wallet - you can set the Reserve to 9999999.99999 (better than setting stake=0 only) then you can add the config setting from the the Skynode that you created in genesys.conf - then just send the 2000 GSY to the Generated GSY address as you usually do - the tx fee will be automatically deducted from your remaining coins in your wallet. I will try to make a simple guide in OP for everyone after we are fully running on v1.3
|
[GSY] Play 3D Games In Wallet - While Staking | Join Us Now! PLEASE DONATE TO THE PROGRESS & SUPPORT OF GENESYS CRYPTO PROJECTS [GSY]: GSkZ9VjA4aZwdqaVemw7uKC68tE5ENn1wN BTC: 1931v9zo5vpTQMHzJefW8LXJ3FqCxfvpvT
|
|
|
cyberspacemonkey
Legendary
Offline
Activity: 1288
Merit: 1002
|
|
November 03, 2015, 03:04:10 AM |
|
I'm glad to see that this coin is finally getting the attention it deserves, I was starting to feel kinda lonely in this thread do u get some sort of indication the skynode is running? My status is blank. I get an error when starting one : ERROR COULD NOT ALLOCATE VIN FOR COLLATERALEADDRESS i sent the 2k to the address yesterday, weird. Do you need to consider the fee for the transaction when sending the 2k to yourself? You can't stake the balance that you're using for Skynodes so you need to Reserve the balance that you're using for the Skynodes under wallet options. Also make sure you have coin control option selected from wallet settings, so you can check where the 2000 coins are.
|
|
|
|
AhmedAshraf
|
|
November 03, 2015, 03:14:51 AM |
|
Hello
How do we create the clearnet or TOR address needed for Skynodes? Can this be bypassed ?
|
|
|
|
Phantas
|
|
November 03, 2015, 07:00:27 AM |
|
We Couldn't wait any longer to get over with this version 1.3 UPGRADE - So we can Focus back on CONFront Development ! ! ! MANDATORY WALLET UPGRADE to v1.3 FIX2 NOW ! ! ! Please re-download your GenesysCoin Wallets (GAMING or STANDARD) to the latest version 1.3 FIX2 Genesys-Core and Skynode Code have been Improved. You need to immediately Upgrade. DOWNLOAD LINKS in OP GITHUB SOURCE UPDATED to v1.3 FIX2 Change Log Genesys Core v1.3.0.0 -Masternode Payment changed from 60% to 75% -Permanent Block Rewards now 0.205 - Halving at Block 152000 -Masternode Expiration Time Improved - Now last longer up to 10 days -DarkSend Fee now 0.0052000 GSY -TX Fee changed from 0.00001000 to 0.00020000 for now -Optimized Core Source -Core Protocol and Masternode Protocol bumped Thank you. I have 4 connections to nodes, but wallet still not synchronizing
|
|
|
|
cyberspacemonkey
Legendary
Offline
Activity: 1288
Merit: 1002
|
|
November 03, 2015, 07:07:06 AM |
|
We Couldn't wait any longer to get over with this version 1.3 UPGRADE - So we can Focus back on CONFront Development ! ! ! MANDATORY WALLET UPGRADE to v1.3 FIX2 NOW ! ! ! Please re-download your GenesysCoin Wallets (GAMING or STANDARD) to the latest version 1.3 FIX2 Genesys-Core and Skynode Code have been Improved. You need to immediately Upgrade. DOWNLOAD LINKS in OP GITHUB SOURCE UPDATED to v1.3 FIX2 Change Log Genesys Core v1.3.0.0 -Masternode Payment changed from 60% to 75% -Permanent Block Rewards now 0.205 - Halving at Block 152000 -Masternode Expiration Time Improved - Now last longer up to 10 days -DarkSend Fee now 0.0052000 GSY -TX Fee changed from 0.00001000 to 0.00020000 for now -Optimized Core Source -Core Protocol and Masternode Protocol bumped Thank you. I have 4 connections to nodes, but wallet still not synchronizing Mine Synced just fine and I have like 11 connections, give it some time. Also, try deleting your peers.dat file from your App data folder and see if that helps.
|
|
|
|
cryptomaddness
Member
Offline
Activity: 108
Merit: 10
|
|
November 03, 2015, 08:04:07 AM Last edit: November 03, 2015, 09:28:15 AM by cryptomaddness |
|
I'm glad to see that this coin is finally getting the attention it deserves, I was starting to feel kinda lonely in this thread do u get some sort of indication the skynode is running? My status is blank. I get an error when starting one : ERROR COULD NOT ALLOCATE VIN FOR COLLATERALEADDRESS i sent the 2k to the address yesterday, weird. Do you need to consider the fee for the transaction when sending the 2k to yourself? You need to run Skynode on a non-staking Wallet - you can set the Reserve to 9999999.99999 (better than setting stake=0 only) then you can add the config setting from the the Skynode that you created in genesys.conf - then just send the 2000 GSY to the Generated GSY address as you usually do - the tx fee will be automatically deducted from your remaining coins in your wallet. I will try to make a simple guide in OP for everyone after we are fully running on v1.3 Definitely need the guide. I had no trouble setting up the skynode before the upgrade, but now i get that same message. This coin is my first attempt at masternodes and i'm definitely having trouble lol EDIT:: I got it working. Don't know how, just tried it after a while and it worked.
|
|
|
|
cyberspacemonkey
Legendary
Offline
Activity: 1288
Merit: 1002
|
|
November 03, 2015, 09:37:16 AM |
|
I'm glad to see that this coin is finally getting the attention it deserves, I was starting to feel kinda lonely in this thread do u get some sort of indication the skynode is running? My status is blank. I get an error when starting one : ERROR COULD NOT ALLOCATE VIN FOR COLLATERALEADDRESS i sent the 2k to the address yesterday, weird. Do you need to consider the fee for the transaction when sending the 2k to yourself? You need to run Skynode on a non-staking Wallet - you can set the Reserve to 9999999.99999 (better than setting stake=0 only) then you can add the config setting from the the Skynode that you created in genesys.conf - then just send the 2000 GSY to the Generated GSY address as you usually do - the tx fee will be automatically deducted from your remaining coins in your wallet. I will try to make a simple guide in OP for everyone after we are fully running on v1.3 Definitely need the guide. I had no trouble setting up the skynode before the upgrade, but now i get that same message. This coin is my first attempt at masternodes and i'm definitely having trouble lol EDIT:: I got it working. Don't know how, just tried it after a while and it worked. Great! Maybe you had the wallet locked, that has happened to me a bunch of times.
|
|
|
|
Phantas
|
|
November 03, 2015, 10:03:38 AM |
|
We Couldn't wait any longer to get over with this version 1.3 UPGRADE - So we can Focus back on CONFront Development ! ! ! MANDATORY WALLET UPGRADE to v1.3 FIX2 NOW ! ! ! Please re-download your GenesysCoin Wallets (GAMING or STANDARD) to the latest version 1.3 FIX2 Genesys-Core and Skynode Code have been Improved. You need to immediately Upgrade. DOWNLOAD LINKS in OP GITHUB SOURCE UPDATED to v1.3 FIX2 Change Log Genesys Core v1.3.0.0 -Masternode Payment changed from 60% to 75% -Permanent Block Rewards now 0.205 - Halving at Block 152000 -Masternode Expiration Time Improved - Now last longer up to 10 days -DarkSend Fee now 0.0052000 GSY -TX Fee changed from 0.00001000 to 0.00020000 for now -Optimized Core Source -Core Protocol and Masternode Protocol bumped Thank you. I have 4 connections to nodes, but wallet still not synchronizing Mine Synced just fine and I have like 11 connections, give it some time. Also, try deleting your peers.dat file from your App data folder and see if that helps. still not working for me, I tried delete peers, reindex wallet, delete old blackcian dat. , but without succes. after that I tried synchro under linux, but same issue, 16 connections and block synch stuck on blok 530
|
|
|
|
GSYTeam (OP)
|
|
November 03, 2015, 01:57:00 PM |
|
To those running v1.3, please stop your Wallet and go back to v1.2 - we will change the Protocol back to the old one in v1.3 Many Nodes are Many Clients are still running v1.2 and v1.0.0.0 so it cause sync issue in v1.3.
Sorry for the inconvenient we are doing our best to bring everyone to the new version - New download Links will be posted in few hours. Thanks!
|
[GSY] Play 3D Games In Wallet - While Staking | Join Us Now! PLEASE DONATE TO THE PROGRESS & SUPPORT OF GENESYS CRYPTO PROJECTS [GSY]: GSkZ9VjA4aZwdqaVemw7uKC68tE5ENn1wN BTC: 1931v9zo5vpTQMHzJefW8LXJ3FqCxfvpvT
|
|
|
TheInfidel
|
|
November 03, 2015, 02:01:19 PM |
|
To those running v1.3, please stop your Wallet and go back to v1.2 - we will change the Protocol back to the old one in v1.3 Many Nodes are Many Clients are still running v1.2 and v1.0.0.0 so it cause sync issue in v1.3.
Sorry for the inconvenient we are doing our best to bring everyone to the new version - New download Links will be posted in few hours. Thanks!
Thanks for the update. When I see a dev this responsive in the thread and actively posting updates, I get this weird feeling of what the hell is going on here. Not common place, keep it up.
|
|
|
|
GSYTeam (OP)
|
|
November 04, 2015, 04:49:38 PM |
|
! ! ! Please Update your Genesys Wallet to v1.3.1 Before [Block 152000] ! ! ! DOWNLOAD LINKS in OP GITHUB SOURCE UPDATED to v1.3.1 Change Log GSY 1.3.1 Genesys Core -Permanent Block Rewards now 0.25 - Halving at Block 152000 -Masternode Expiration Time Improved - Now last longer up to 10 days -DarkSend Fee now 0.0052000 GSY -Core Protocol and Masternode Protocol bumped -Optimized Core Source -New Checkpoints Hardcoded *You can now Sync from Scratch without any Issue - Many Fixes and improvements have been applied to the Core Currency. On our next Version, we will ban all NODES and WALLET CLIENTS running Protocol 8270. Note: All Credits go to our Backend Devs. We will now go back and Focus on ConFront Development. Thanks for your Time and Support - please stay tuned and keep staking.
|
[GSY] Play 3D Games In Wallet - While Staking | Join Us Now! PLEASE DONATE TO THE PROGRESS & SUPPORT OF GENESYS CRYPTO PROJECTS [GSY]: GSkZ9VjA4aZwdqaVemw7uKC68tE5ENn1wN BTC: 1931v9zo5vpTQMHzJefW8LXJ3FqCxfvpvT
|
|
|
cyberspacemonkey
Legendary
Offline
Activity: 1288
Merit: 1002
|
|
November 04, 2015, 05:50:13 PM |
|
! ! ! Please Update your Genesys Wallet to v1.3.1 Before [Block 152000] ! ! ! DOWNLOAD LINKS in OP GITHUB SOURCE UPDATED to v1.3.1 Change Log GSY 1.3.1 Genesys Core -Permanent Block Rewards now 0.25 - Halving at Block 152000 -Masternode Expiration Time Improved - Now last longer up to 10 days -DarkSend Fee now 0.0052000 GSY -Core Protocol and Masternode Protocol bumped -Optimized Core Source -New Checkpoints Hardcoded *You can now Sync from Scratch without any Issue - Many Fixes and improvements have been applied to the Core Currency. On our next Version, we will ban all NODES and WALLET CLIENTS running Protocol 8270. Note: All Credits go to our Backend Devs. We will now go back and Focus on ConFront Development. Thanks for your Time and Support - please stay tuned and keep staking. Syncing fine now for me, but all my Skynodes dissapeared do I have to create them all over again?
|
|
|
|
Phantas
|
|
November 04, 2015, 07:22:07 PM |
|
I created new, and now everything working fine. Thank you dev.
|
|
|
|
GSYTeam (OP)
|
|
November 04, 2015, 07:55:40 PM |
|
Syncing fine now for me, but all my Skynodes dissapeared do I have to create them all over again? No need to recreate them all over again if you still have your Skynode Config file in place. You will continue to receive payment until your Skynodes Expire then after they expire and get removed from the list, you will then recreate them under this version 1.3.1 and have control in My Skynodes Tab. Thanks!
|
[GSY] Play 3D Games In Wallet - While Staking | Join Us Now! PLEASE DONATE TO THE PROGRESS & SUPPORT OF GENESYS CRYPTO PROJECTS [GSY]: GSkZ9VjA4aZwdqaVemw7uKC68tE5ENn1wN BTC: 1931v9zo5vpTQMHzJefW8LXJ3FqCxfvpvT
|
|
|
GSYTeam (OP)
|
|
November 04, 2015, 08:38:24 PM |
|
! ! ! Please Update your Genesys Wallet to v1.3.1 Before [Block 152000] ! ! ! DOWNLOAD LINKS in OP GITHUB SOURCE UPDATED to v1.3.1
|
[GSY] Play 3D Games In Wallet - While Staking | Join Us Now! PLEASE DONATE TO THE PROGRESS & SUPPORT OF GENESYS CRYPTO PROJECTS [GSY]: GSkZ9VjA4aZwdqaVemw7uKC68tE5ENn1wN BTC: 1931v9zo5vpTQMHzJefW8LXJ3FqCxfvpvT
|
|
|
TheInfidel
|
|
November 04, 2015, 11:49:07 PM |
|
Well after the dumping that occurred I now have a lot of these, I guess price will correct in the right direction once the BTC price stabilises.
|
|
|
|
cyberspacemonkey
Legendary
Offline
Activity: 1288
Merit: 1002
|
|
November 05, 2015, 03:05:42 AM |
|
Dev how do we edit the ip address for the Masternodes when we need to? I keep clicking "Edit" but nothing comes up
|
|
|
|
GSYTeam (OP)
|
|
November 05, 2015, 09:24:16 AM |
|
Dev how do we edit the ip address for the Masternodes when we need to? I keep clicking "Edit" but nothing comes up For now you need to delete and redo again. The masternode code still need some perfections on the go. I hope your are not having trouble setting up your Skynodes?
|
[GSY] Play 3D Games In Wallet - While Staking | Join Us Now! PLEASE DONATE TO THE PROGRESS & SUPPORT OF GENESYS CRYPTO PROJECTS [GSY]: GSkZ9VjA4aZwdqaVemw7uKC68tE5ENn1wN BTC: 1931v9zo5vpTQMHzJefW8LXJ3FqCxfvpvT
|
|
|
GSYTeam (OP)
|
|
November 05, 2015, 04:16:51 PM |
|
There are still some Nodes and Clients running Genesys 1.0.0.0 ! ! ! Please Update your Genesys Wallet to v1.3.1 Before [Block 152000] ! ! ! DOWNLOAD LINKS in OP GITHUB SOURCE UPDATED to v1.3.1
|
[GSY] Play 3D Games In Wallet - While Staking | Join Us Now! PLEASE DONATE TO THE PROGRESS & SUPPORT OF GENESYS CRYPTO PROJECTS [GSY]: GSkZ9VjA4aZwdqaVemw7uKC68tE5ENn1wN BTC: 1931v9zo5vpTQMHzJefW8LXJ3FqCxfvpvT
|
|
|
cyberspacemonkey
Legendary
Offline
Activity: 1288
Merit: 1002
|
|
November 05, 2015, 04:50:26 PM |
|
Dev how do we edit the ip address for the Masternodes when we need to? I keep clicking "Edit" but nothing comes up For now you need to delete and redo again. The masternode code still need some perfections on the go. I hope your are not having trouble setting up your Skynodes? Well I'm just re-creating them all on the new wallet that's all, but it'd be nice if you can put together a simple guide for masternodes and post it here if you can.
|
|
|
|
|