Bagdar13
Member
Offline
Activity: 115
Merit: 10
|
|
January 07, 2016, 07:10:59 PM |
|
Looked at your pool stats and I note that the payout does not tally with the mining calculator at etherscan.io 100 MHps is calculated to pay just over 5 ETH per day but your contributors seems to be achieving about 3+ ETH only. Maybe I am interpreting it wrong...
Try it for 24h and report back - my calcs were/are based on etherscans source, I will check it again as soon as I have some time. I have been using suprnova for a while and I am geting 20.5 Eth on 430 MHps exactly inline with calculations, so I can vouch for the efficiency. Also, it is returning 5-10% more with the bonus over dwarf, where i got 19.5 Eth in the same time with the same power. Edit: dont be fooled by pooleths +25% offer even with the bonus its no better (and possibly worse) than suprnova due to no stratum etc.
|
|
|
|
ocminer (OP)
Legendary
Offline
Activity: 2660
Merit: 1240
|
|
January 07, 2016, 09:46:17 PM |
|
Looked at your pool stats and I note that the payout does not tally with the mining calculator at etherscan.io 100 MHps is calculated to pay just over 5 ETH per day but your contributors seems to be achieving about 3+ ETH only. Maybe I am interpreting it wrong...
Try it for 24h and report back - my calcs were/are based on etherscans source, I will check it again as soon as I have some time. I have been using suprnova for a while and I am geting 20.5 Eth on 430 MHps exactly inline with calculations, so I can vouch for the efficiency. Also, it is returning 5-10% more with the bonus over dwarf, where i got 19.5 Eth in the same time with the same power. Edit: dont be fooled by pooleths +25% offer even with the bonus its no better (and possibly worse) than suprnova due to no stratum etc. Thanks for your props, I really appreciate, I'm working hard on the pool. I've updated the High Diff Port to make it more usable for medium-sized rigs/proxys as well. You should be seeing more shares per minute now.
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
instanteth
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 08, 2016, 05:04:37 PM |
|
Try it for 24h and report back - my calcs were/are based on etherscans source, I will check it again as soon as I have some time.
I have been using suprnova for a while and I am geting 20.5 Eth on 430 MHps exactly inline with calculations, so I can vouch for the efficiency. Also, it is returning 5-10% more with the bonus over dwarf, where i got 19.5 Eth in the same time with the same power. Edit: dont be fooled by pooleths +25% offer even with the bonus its no better (and possibly worse) than suprnova due to no stratum etc. It is good to hear from a real user. Thanks. Will definitely try it myself. Having issues with one of my rigs which is occupying my time.
|
|
|
|
ocminer (OP)
Legendary
Offline
Activity: 2660
Merit: 1240
|
|
January 09, 2016, 09:35:50 AM |
|
Still 0% fee and 10 % Bonus this weekend !
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
tlmoscow
|
|
January 09, 2016, 10:40:54 AM |
|
I need to disable one of my GPU in ethminer, trying --opencl-device - no effect...Some advice?
|
|
|
|
ocminer (OP)
Legendary
Offline
Activity: 2660
Merit: 1240
|
|
January 09, 2016, 12:10:36 PM |
|
I need to disable one of my GPU in ethminer, trying --opencl-device - no effect...Some advice?
It should work with that. --opencl-device 0,1,3 for example should not be using device nr 2
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
tlmoscow
|
|
January 09, 2016, 12:11:45 PM |
|
That was my first step. Didn't worked.
|
|
|
|
Bagdar13
Member
Offline
Activity: 115
Merit: 10
|
|
January 09, 2016, 09:15:46 PM |
|
That was my first step. Didn't worked. I have had this problem as well, the documentation says that should work however i have never been able to get it to work like that on my rigs. However what might help is if you want to disable 0 if you set --opencl-device 1 then set the number of threads to 1 less than the number gpus it will start with 1 and then not use 0. At least it does on my machine, but if you are trying to lock out any other except 0 I don't know any way to do it.
|
|
|
|
tlmoscow
|
|
January 10, 2016, 07:29:04 AM |
|
Thx for the advice! As i remember sgminer can change order of GPU, maybe it can help.
|
|
|
|
ocminer (OP)
Legendary
Offline
Activity: 2660
Merit: 1240
|
|
January 11, 2016, 09:36:31 PM |
|
Grab the Bonus now, still 10% bonus and 0 % fee !
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
|
dygus
Legendary
Offline
Activity: 1193
Merit: 1000
Peaky Blinder
|
|
January 14, 2016, 08:11:47 AM |
|
Can I use rigs.online (to rent my rigs) with proxy?
|
|
|
|
Pansyfaust
|
|
January 14, 2016, 10:06:23 AM |
|
Is there a way to mine from behind a firewall using the proxy? I've always mined through port 80, but now I get RPCon error after trying to use the proxy method?
|
|
|
|
ocminer (OP)
Legendary
Offline
Activity: 2660
Merit: 1240
|
|
January 14, 2016, 10:16:20 AM |
|
Is there a way to mine from behind a firewall using the proxy? I've always mined through port 80, but now I get RPCon error after trying to use the proxy method?
Hi ! Sorry I just noticed there was an error on the Port 80, you can use http://eth-us.suprnova.cc:80 for now, fix for the old 80-eth is underway and should be okay in a few hours. @dygus: I've asked rigs.online if you can use the proxy.. Did you try it already ?
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
Pansyfaust
|
|
January 14, 2016, 11:09:21 AM |
|
Is there a way to mine from behind a firewall using the proxy? I've always mined through port 80, but now I get RPCon error after trying to use the proxy method?
Hi ! Sorry I just noticed there was an error on the Port 80, you can use http://eth-us.suprnova.cc:80 for now, fix for the old 80-eth is underway and should be okay in a few hours. @dygus: I've asked rigs.online if you can use the proxy.. Did you try it already ? trying to get it to work, but this error keeps coming up:
|
|
|
|
ocminer (OP)
Legendary
Offline
Activity: 2660
Merit: 1240
|
|
January 14, 2016, 11:10:43 AM |
|
Is there a way to mine from behind a firewall using the proxy? I've always mined through port 80, but now I get RPCon error after trying to use the proxy method?
Hi ! Sorry I just noticed there was an error on the Port 80, you can use http://eth-us.suprnova.cc:80 for now, fix for the old 80-eth is underway and should be okay in a few hours. @dygus: I've asked rigs.online if you can use the proxy.. Did you try it already ? trying to get it to work, but this error keeps coming up: You have configured a backup upstream server in your proxy config which you need to disable if you don't have "geth" running on your local machine (127.0.0.1)
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
Pansyfaust
|
|
January 14, 2016, 11:31:43 AM |
|
Is there a way to mine from behind a firewall using the proxy? I've always mined through port 80, but now I get RPCon error after trying to use the proxy method?
Hi ! Sorry I just noticed there was an error on the Port 80, you can use http://eth-us.suprnova.cc:80 for now, fix for the old 80-eth is underway and should be okay in a few hours. @dygus: I've asked rigs.online if you can use the proxy.. Did you try it already ? trying to get it to work, but this error keeps coming up: You have configured a backup upstream server in your proxy config which you need to disable if you don't have "geth" running on your local machine (127.0.0.1) No geth running on my local machine. How might disable that? I am but a simple peasant
|
|
|
|
ocminer (OP)
Legendary
Offline
Activity: 2660
Merit: 1240
|
|
January 14, 2016, 11:33:47 AM |
|
Is there a way to mine from behind a firewall using the proxy? I've always mined through port 80, but now I get RPCon error after trying to use the proxy method?
Hi ! Sorry I just noticed there was an error on the Port 80, you can use http://eth-us.suprnova.cc:80 for now, fix for the old 80-eth is underway and should be okay in a few hours. @dygus: I've asked rigs.online if you can use the proxy.. Did you try it already ? trying to get it to work, but this error keeps coming up: You have configured a backup upstream server in your proxy config which you need to disable if you don't have "geth" running on your local machine (127.0.0.1) No geth running on my local machine. How might disable that? I am but a simple peasant Look here: https://github.com/sammy007/ether-proxy/blob/master/config.example.jsonThat config.json should be in your proxy directory. Remove the { "name": "backup", "url": " http://127.0.0.2:8545", "timeout": "10s" } part completely OR replace it with sammy's pool which will give you failover if suprnova should be down: { "pool": true, "name": "EuroHash.net", "url": " http://eth-eu.eurohash.net:8888/miner/YOURWALLETADDRESS/proxy", "timeout": "10s" }
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
Pansyfaust
|
|
January 14, 2016, 11:48:09 AM |
|
Is there a way to mine from behind a firewall using the proxy? I've always mined through port 80, but now I get RPCon error after trying to use the proxy method?
Hi ! Sorry I just noticed there was an error on the Port 80, you can use http://eth-us.suprnova.cc:80 for now, fix for the old 80-eth is underway and should be okay in a few hours. @dygus: I've asked rigs.online if you can use the proxy.. Did you try it already ? trying to get it to work, but this error keeps coming up: You have configured a backup upstream server in your proxy config which you need to disable if you don't have "geth" running on your local machine (127.0.0.1) No geth running on my local machine. How might disable that? I am but a simple peasant I think i'm doing it correctly now? Besides backup pools, what other benefits are there?
|
|
|
|
ocminer (OP)
Legendary
Offline
Activity: 2660
Merit: 1240
|
|
January 14, 2016, 12:44:14 PM |
|
I think i'm doing it correctly now? Besides backup pools, what other benefits are there? Correct, now everything looks good. Hmm, I don't think there are any other benefits.. You just have safety that your rig won't be idle in case the main pool goes down.
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
|