[ETHEREUM] [POOL] https://ETH.suprnova.cc 0% fee, 20 % BONUS per Block ! //

[US Mining Rentals]

Hello,
Ive been trying to mine with the following commandline:
setx GPU_MAX_ALLOC_PERCENT 100
ethminer -U -F http://eth-mine.suprnova.cc:3000/USMiningRentals.gtx1/50

I've also tried with the -G instead of -U

Im running 6x 750ti.

I can mine for days and see 'mining on powhash' and even hashrate, but the pool always shows 0 speed and winnings.


Thanks,

[tmpwhore]

Im getting alot of disconnects using the proxy server for some reason. Sometimes it works fine for an hour sometimes it can't get work from the proxy server. Is it still buggy?

Getting this crap:

JSON-RPC problem. Probably couldn't connect. Retrying in 1...
miner  09:13:43|main  Mining on PoWhash #a871fca1ÔǪ : 21716071 H/s = 44040192 h

alot. Works perfectly fine on dwarfpool and it's submitting shares so it's obviously working just crappy. I notice the proxy server will just sit there for the time it's trying to get work then after maybe 10 secs it gets a bunch of work all at once then the hashing will restart. Oh well back to the standard way i guess.

[tbearhere]

Hello,
Ive been trying to mine with the following commandline:
setx GPU_MAX_ALLOC_PERCENT 100
ethminer -U -F http://eth-mine.suprnova.cc:3000/USMiningRentals.gtx1/50

I've also tried with the -G instead of -U

Im running 6x 750ti.

I can mine for days and see 'mining on powhash' and even hashrate, but the pool always shows 0 speed and winnings.


Thanks,

750ti cards won't mine this anymore. Also look at my post # 501. But did you try     --farm-recheck 300

[jeremy grol]

Still mining on suprnova with no issue at all.

[ocminer]

I've updated eth-us.suprnova.cc and eth-mine.suprnova.cc to new versions and also improved performance quite a lot, there shouldn't be any timeouts or "JSON RPC error.." anymore.

[phzi]

I've updated eth-us.suprnova.cc and eth-mine.suprnova.cc to new versions and also improved performance quite a lot, there shouldn't be any timeouts or "JSON RPC error.." anymore.

Are you able to offer stratum on eth-us.suprnova.cc ?  Getwork is so ugg; would be nice to use qtminer or genoil w/ stratum on this pool.

[drawer]

Hi all, i have issue I have several PC with intel Chip mining power about 0.35 MH/s. I've create one worker on suprnova pool, and I set the same worker on all PC. Will those workers sum in one MH power on suprnova pool ? If not , how to set it ?

[ocminer]

I've updated eth-us.suprnova.cc and eth-mine.suprnova.cc to new versions and also improved performance quite a lot, there shouldn't be any timeouts or "JSON RPC error.." anymore.

Are you able to offer stratum on eth-us.suprnova.cc ?  Getwork is so ugg; would be nice to use qtminer or genoil w/ stratum on this pool.

Yes, working on it.

Hi all, i have issue I have several PC with intel Chip mining power about 0.35 MH/s. I've create one worker on suprnova pool, and I set the same worker on all PC. Will those workers sum in one MH power on suprnova pool ? If not , how to set it ?

No, you would have to use the proxy:

https://github.com/sammy007/ether-proxy

And point all your rigs to this proxy. The proxy than connects via one worker to the pool

[drawer]

I've updated eth-us.suprnova.cc and eth-mine.suprnova.cc to new versions and also improved performance quite a lot, there shouldn't be any timeouts or "JSON RPC error.." anymore.

Are you able to offer stratum on eth-us.suprnova.cc ?  Getwork is so ugg; would be nice to use qtminer or genoil w/ stratum on this pool.

Yes, working on it.

Hi all, i have issue I have several PC with intel Chip mining power about 0.35 MH/s. I've create one worker on suprnova pool, and I set the same worker on all PC. Will those workers sum in one MH power on suprnova pool ? If not , how to set it ?

No, you would have to use the proxy:

https://github.com/sammy007/ether-proxy

And point all your rigs to this proxy. The proxy than connects via one worker to the pool

Uhh, any example how to do it ? Do i have to install any proxy on win 7 ?

[Unacceptable]

Is there a way to turn off the ringer when on the dashboard

It over rides all other stuff I got going on,TS,games,etc...

Thanks!!

[Za1n]

I've updated eth-us.suprnova.cc and eth-mine.suprnova.cc to new versions and also improved performance quite a lot, there shouldn't be any timeouts or "JSON RPC error.." anymore.

Sadly I need to report that this is still occurring. I am using eth-us.suprnova.cc and had a spat of them this morning. I can tell because one of the miner closest to my desk is pointed to your pool and the fans quiet down a bit every time they lose connectivity. I checked the console while this was happening and seen the json messages and actually hopped on this thread to see if anything was going on.

[Za1n]

Is there a way to turn off the ringer when on the dashboard

It over rides all other stuff I got going on,TS,games,etc...

Thanks!!

There is a little icon down near the bottom right of the dashboard page you can click to temporarily disable the sound. Unfortunately if you leave the page and come back, or if you refresh the page, it seems to re-enable itself.

I would also like to see if there could be a option added to disable this "feature" permanently, as it is quite annoying, especially with quick block coins like Ethereum.

[mindless1]

Hey, so just switched to suprnova , I've got two rigs ~65MH/s each.

Running through sammy007's ether-proxy connected to http://eth-mine.suprnova.cc:3000/username.workername/50

Mining with ethminer.exe -G http://ip:port/miner/50/rig1

My questions are:

• should the difficulty in the ethminer command be set to 60 or 65, to reflect hashrate?
  
• should I change in ether-proxy the 50 to reflect total hashrate for my local pool/two rigs at 120 or 130
• I am seeing a few green/confirmed and a lot of unconfirmed transactions. Care to explain what these mean, what is it trying to confirm and when will it happen?

Thanks

[Newwsr]

Pool with this problem

[Amph]

expanse pool is showing wrong estimate earning, half of the correct earning at least, checks it please

[Za1n]

expanse pool is showing wrong estimate earning, half of the correct earning at least, checks it please

Ethereum pool as well, no earnings credited from yesterday's mysterious "front-end" downtime. I don't know what it is, but when the price goes up and everybody's starts turning into a scammer all of a sudden. If you aren't making ends meet raise the pool fee, quit this bullshit scamming on the back-end. Next thing I suppose we will get the inevitable "we been hacked" email. Enough warning signs for me to switch my miners, too bad all the other pools are just as bad.

[drawer]

Is there posible to mine eth on win 32 bit ? I've read that ethminer is 64-bit only, so is there any other 32 bit version ?

[Dr_Victor]

Ocminer, should I do anything to be ready for Homestead Hardfork if I use bat file like this: ethminer -G -F http://eth-mine.suprnova.cc:3000

[Dowper]

Is there posible to mine eth on win 32 bit ? I've read that ethminer is 64-bit only, so is there any other 32 bit version ?

You need 64-bit OS to mine.

[FFI2013]

I've updated eth-us.suprnova.cc and eth-mine.suprnova.cc to new versions and also improved performance quite a lot, there shouldn't be any timeouts or "JSON RPC error.." anymore.

Are you able to offer stratum on eth-us.suprnova.cc ?  Getwork is so ugg; would be nice to use qtminer or genoil w/ stratum on this pool.

Yes, working on it.

Hi all, i have issue I have several PC with intel Chip mining power about 0.35 MH/s. I've create one worker on suprnova pool, and I set the same worker on all PC. Will those workers sum in one MH power on suprnova pool ? If not , how to set it ?

No, you would have to use the proxy:

https://github.com/sammy007/ether-proxy

And point all your rigs to this proxy. The proxy than connects via one worker to the pool

just wondering if stratum is supported on all ports now Thanks oc