[ETHEREUM] [POOL] https://ETH.suprnova.cc 0% fee, 20 % BONUS per Block ! //

[rolanleno]

the last two hours there are problems the pool !!!  

I wish I could mine on a pool lol

uses etherminer version = ethminer-0.9.41-Windows 64-bit  ??



if you do not want to configure anything you can try on https://ethpool.org writing

ethpool.bat file = ethminer -F http://ethpool.org/miner/adress eth.worker1/50 -G

and wait a while to see your miners

I get "No GPU device with sufficient memory was found. Can't GPU mine. Remove the -G argument"

but when I list devices it shows 2 GPUs which would be correct as I am trying to mine with an XFX R9 295x2 which is 2 chips like having 2x 4gb R9 290x's http://i219.photobucket.com/albums/cc271/baz80/Untitled_zpsxxfisw0e.jpg

try to check on handling video cards and disable devices in case that integrated into the processor or motherboard ..... probably see for the first one that does not have enough memory

been in to the bios to make sure only PCIe is on and not intel HD/integrated and I am still having the same error :/ I think maybe I should just forget it lol

tried to change video card with something more 'simple type radeon hd 7870 (12 MHs)
... Or else to try it depends on video card !!          https://www.cryptocompare.com/mining/#/equipment

I am not sure what you mean change my video card? this is the same as my GPU now https://www.cryptocompare.com/mining/sapphire/radeon-r9-295x2-ethereum-mining/ apart from mine is XFX

Ok I now have my ethminer seeing my GPU and mining on solo with this .bat file
ethminer -F http://ethpool.org/miner/0xe85C6B78abc7D66fb0D04A3d6BbD22C35bE2803F.worker1/50 -G --opencl-platform 1

how do I change the bat file so I can mine on suprnova please?

Massive thank you for all the help

::EDIT::
AMD Crossfire was ticked so unticked and I am hashing at 89mhs on suprnova so hopefully I will start to see some Eth in my wallet soon :p

Hello oncloud9,

Having exactly the same problem you are having, except that I can't find the Switch to switch off the crossfire option in Catalyst.
Would you mind letting me/us know which Catalyst version are you using?
Best regards!

[IcelandsErikTheRed1]

Hey everyone I've been at it for 3 days and nights . my hands are killing me . i am on and hashing https://i.imgur.com/c6TkrjZ.png
how can I increase the output of my card 960m on skylake i7 16gb ram?
Thank you all , I'm very gratified with the results of my work and it's great to be in the Ether

[craslovell]

I'm mining on the low diff port for Eth with a single 7950.. Was working fine for a while but now showing nothing pool side. I've regenerated the DAG but still no luck.

[Ayers]

when feathercoin pool will be back? other pool seems have issue with orphan i don't like them, please restore this, thank you

[Newwsr]

Pool this problem with the coins are Unconfirmed somen and then not go to Confirmed

[vincc54]

Hello, 

I have a same problem that "Robertdupont".

I mine with two computers. Concerning the one, I have a R9 380 and that works well. But, the second, I have a R9 390x and it does not work.

I none did not go back up on eth.supernova.cc . My worker is noted as inactive. Yet, I mine at 20 MH/s

Have you ideas ?

Thank you in advance

Log :

http://nsa38.casimages.com/img/2016/05/18/160518110658661761.jpg

[Taiga]

Hi, help me, how to start  ether-proxy(sammy007)

[vincc54]

I solved my problem

you must use an earlier version of amd catalyst.
15.xx -> OK
16.xx -> No Ok

++

Hello, 

I have a same problem that "Robertdupont".

I mine with two computers. Concerning the one, I have a R9 380 and that works well. But, the second, I have a R9 390x and it does not work.

I none did not go back up on eth.supernova.cc . My worker is noted as inactive. Yet, I mine at 20 MH/s

Have you ideas ?

Thank you in advance

Log :

http://nsa38.casimages.com/img/2016/05/18/160518110658661761.jpg

[slysam]

Im using newest amd driver with no problems.   2x 280x

[MinermanNC]

Hello,

I have a same problem that "Robertdupont".

I mine with two computers. Concerning the one, I have a R9 380 and that works well. But, the second, I have a R9 390x and it does not work.

I none did not go back up on eth.supernova.cc . My worker is noted as inactive. Yet, I mine at 20 MH/s

Have you ideas ?

Thank you in advance

Log :



I posted this yesterday in the Eth thread: I will try older drivers and see what happens, Thx

Odd circumstance here,,, any ideas?

Just installed 3- R9 290's in a rig previously occupied by 3 - 7950's.

Went ahead and updated drivers etc. All 3 cards are recognized by system. started hashing, all 3 cards show work and all seems fine. However I am not seeing any hash on the assigned worker in supernova pool.

All other rigs/workers hashing fine as normal and showing hash on pool.... ok, at wits end here... I have always mined with 280x's and 7970's and 7950's.. is there anything different here with 290's I am missing?

Any suggestions appreciated

THX

EDIT: I did log into Decred pool on Supr, and everything is normal... issue seems limited to only eth/algo

Last Edit: Got rid of 16xxx and reinstalled 15xxx Crimson drivers, that did the trick. Hash rate now showing on its assigned worker on Suprnova!

THX!  

[IcelandsErikTheRed1]

There have been no responses on this page in 5 days and I am wondering why not. I have my payouts threshold set and should have received 3 payments by now and I have squat. Is this pool still active?

[z0n0]

ocminer whats happening with XMG pool? Seems down..

[gold368]

i can not config proxy for exp help me

[Amph]

are you planning to open the feathercoin pool anytime soon? because apparently there is an entity with 500M that is solo mining or something, a private pool most likely chinese

other pool are too tiny to even find block on a regular bases

[genrijst]

people
through his run, throw settings
I have Windows 7
programs, how to set
it is advisable to detail.

[ocminer]

Suprnova closes eth.suprnova.cc


Because of the recent developments concerning the soft/hard fork discussion because of the DAO Hack and the decisions by the Dev's, I've decided to close the Ethereum Pool as I think ETH does not comply with the idea of irreversible, uncensored blockchain technology.

ETH is still a brilliant coin (or rather a technology) with most likely a bright future because of all the funding invested the clever dev's attached and all the possibilites with Smart Contracts etc. Of course mine it if its profitable for you, or not if you don't like the whole (changed) idea behind it.

The Pool will remain running until the fork occurs, as there are plenty of pools already it should be pretty easy to move over. It was a pleasure being one of the first pools available for ETH and I enjoyed working with the technology.

Please move your miners to the other pools, it was great to have you on suprnova, check the main page, lots of other coins are listed there too or just PM me if you find a coin that is not listed. https://www.suprnova.cc

Thanks !

[a03131216]

How can I solve     <unknown>  Generating DAG file[color

Miners 10:22:57 | on PoWhash # 9d27ca8b ?? major mining: 0 H / S = 0 hash / 0.5 seconds
Miners 10:22:58 | main working packages:
Miners 10:22:58 | main header hash: 324b66f6f4f652dda7e20e2bd6ee0494ff63bd1b413
fa1808eed0b5c5552f68a
Miners 10:22:58 | Main Seedhash: 0d8c40ac47b0766b970fa2a1bcf7c81e6001e0b5889675
6e343d121e8a35399d
Miners 10:22:58 | main objectives: 00000000dbe6fecebdedd5beb573440e5a884d1b2fbf06fc
ce912adcb8d8422e
Miners 10:22:59 | on PoWhash # 324b66f6 ?? major mining: 245800 H / S = 122900 hash
/ 0.5 seconds
Miners 10:23:00 | PoWhash # 324b66f6 ?? major mining on: 202631 H / S = 223300 hash
/ 1.102 trumpet
Miners 10:23:01 | on PoWhash # 324b66f6 ?? major mining: 206266 H / S = 230400 hash
/ 1.117 trumpet
DAG 10:23:01 | <unknown> Generate DAG file. Progress: 0%
Miners 10:23:02 | on PoWhash # 324b66f6 ?? major mining: 193419 H / S = 223400 hash
/ 1.155 trumpet
Miners 10:23:03 | PoWhash # 324b66f6 ?? major mining on: 188918 H / S = 213100 hash
/ 1.128 trumpet
Miners 10:23:04 | on PoWhash # 324b66f6 ?? major mining: 188496 H / S = 208100 hash
/ 1.104 trumpet

[ocminer]

i can not config proxy for exp help me

yup, what kind of stratum is exp.suprnova.cc:4000 ?

none of the 3 genoil miner specs comply

Will be compatible tomorrow to nicehash stratum and claymore

[ocminer]

i can not config proxy for exp help me

yup, what kind of stratum is exp.suprnova.cc:4000 ?

none of the 3 genoil miner specs comply

Will be compatible tomorrow to nicehash stratum and claymore

The EXP pool is now also Stratum compatible to Nicehash, Claymore, Genoil etc.

https://exp.suprnova.cc

[ocminer]

10% Bonus currently active. Grab the free coins