ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH

[rockyforever]

so consesus is 3 PSUs at least 500W would suffice?

yes if single rail! 40v or above

http://www.newegg.com/Product/Product.aspx?Item=N82E16817438012

something like this i am assuming

40a on 12v is perfect. the 2 * 6pins is worrying as 200w/6pin might be a bit too much...    this is evga so cables should be top notch...
might be ok for 1 blade, but for the blade an controller combo this is better http://www.newegg.com/Product/Product.aspx?Item=N82E16817438049

hint: research the 1300w type!

http://www.newegg.com/Product/Product.aspx?Item=9SIA24G28N5238

this could run the whole thing? would i need additonal cables or anything?

[1714846430]

1714846430

[1714846430]

1714846430

[1714846430]

1714846430

[ATCkit]

so consesus is 3 PSUs at least 500W would suffice?

yes if single rail! 40v or above

http://www.newegg.com/Product/Product.aspx?Item=N82E16817438012

something like this i am assuming

40a on 12v is perfect. the 2 * 6pins is worrying as 200w/6pin might be a bit too much...    this is evga so cables should be top notch...
might be ok for 1 blade, but for the blade an controller combo this is better http://www.newegg.com/Product/Product.aspx?Item=N82E16817438049

hint: research the 1300w type!

 I have 3 EVGA 600B I plan to use if i can ever afford to get an S7. EVGA cables are very good. You turn the CPU's calbes into a third 6 pin cable by getting one of these:

http://www.aerocooler.com/product_info.php?products_id=2140&uid=46a70fhni1ohbr3i2seqt94290

I use these on my existing 600Bs with no issues.

[klondike_bar]

And the buy button just went live, despite the large expense, I wonder how long until they sell out of batch #1?

Good luck to everyone buying these ! Looks like some great gear, but this time around, instead of buying a fancy new miner, I did the following and will HODL.



Lets see which will be the better investment 9 months down the road.

This seems like the smart thing to do at the end of the day!  As flashy as this hardware is, it's not looking like it is worth the inevitable risks with difficulty rises, and larger scale farm deployment.  I will sit this out too, and just purchase coin and HODL.  Best of luck to buyers!

I bought 0.5w/GH hardware for 1BTC/TH over 6 months ago - its basically paid for itself and still holds the same value on the resale market. This stuff at 2BTC/TH, without power supply, is insanity

[Biodom]

so consesus is 3 PSUs at least 500W would suffice?

yes if single rail! 40v or above

http://www.newegg.com/Product/Product.aspx?Item=N82E16817438012

something like this i am assuming

40a on 12v is perfect. the 2 * 6pins is worrying as 200w/6pin might be a bit too much...    this is evga so cables should be top notch...
might be ok for 1 blade, but for the blade an controller combo this is better http://www.newegg.com/Product/Product.aspx?Item=N82E16817438049

hint: research the 1300w type!

http://www.newegg.com/Product/Product.aspx?Item=9SIA24G28N5238

this could run the whole thing? would i need additonal cables or anything?

it's complicated...it might, but not 100% before someone tests it PLUS you would need to use PCIe splitters (not included) on at least two out of four singles.
The geometry will be discussed here endlessly in the next month.

[mavericklm]

http://www.newegg.com/Product/Product.aspx?Item=9SIA24G28N5238

this could run the whole thing? would i need additonal cables or anything?

i think it's perfect! 2*6pin/blade, 1*controller and 1*6pin free that u can shove in one of the blades

it's complicated...it might, but not 100% before someone tests it PLUS you would need to use PCIe splitters (not included) on at least two out of four singles.
The geometry will be discussed here endlessly in the next month.

he can use 2 of 6pin per blade. this are 16awg! it can power 250w/6pin easy!

[ATCkit]

I'd love to get a coupon to buy an S7. Bitmain username is: Alibell854.

[Biodom]

http://www.newegg.com/Product/Product.aspx?Item=9SIA24G28N5238

this could run the whole thing? would i need additonal cables or anything?

i think it's perfect! 2*6pin/blade, 1*controller and 1*6pin free that u can shove in one of the blades

it's complicated...it might, but not 100% before someone tests it PLUS you would need to use PCIe splitters (not included) on at least two out of four singles.
The geometry will be discussed here endlessly in the next month.

he can use 2 of 6pin per blade. this are 16awg! it can power 250w/6pin easy!

that's the gist of the matter...people will see: three connectors required and will hesitate to use just two (and maybe rightfully so), however using splitters on a SINGLE evga red cord(s) and then engaging all three connectors on each blade is a compromise. Splitters are like $5-7 (just NEVER use the cheap 20 awg ones)

[mavericklm]

or go full retard and buy this

http://www.aerocooler.com/product_info.php?products_id=2140&uid=46a70fhni1ohbr3i2seqt94290

and some sata to vga

and populate all the 6pins

[ATCkit]

http://www.newegg.com/Product/Product.aspx?Item=9SIA24G28N5238

this could run the whole thing? would i need additonal cables or anything?

i think it's perfect! 2*6pin/blade, 1*controller and 1*6pin free that u can shove in one of the blades

it's complicated...it might, but not 100% before someone tests it PLUS you would need to use PCIe splitters (not included) on at least two out of four singles.
The geometry will be discussed here endlessly in the next month.

he can use 2 of 6pin per blade. this are 16awg! it can power 250w/6pin easy!

1300 watts seems a bit light to me when you consdier that many say you should calculate at 90% wattage availability. So 1300* .90 = 1170 watts.
Also, the advantage of using 3 smaller PSUs is you can use three different circuits as many of us don't have the capacity to run a large PSU on one circuit.

[Badr]

that's awesome,
i'm welling to buy 2x S7 now, Great job BITMAIN ..

[Biodom]

http://www.newegg.com/Product/Product.aspx?Item=9SIA24G28N5238

this could run the whole thing? would i need additonal cables or anything?

i think it's perfect! 2*6pin/blade, 1*controller and 1*6pin free that u can shove in one of the blades

it's complicated...it might, but not 100% before someone tests it PLUS you would need to use PCIe splitters (not included) on at least two out of four singles.
The geometry will be discussed here endlessly in the next month.

he can use 2 of 6pin per blade. this are 16awg! it can power 250w/6pin easy!

1300 watts seems a bit light to me when you consdier that many say you should calculate at 90% wattage availability. So 1300* .90 = 1170 watts.
Also, the advantage of using 3 smaller PSUs is you can use three different circuits as many of us don't have the capacity to run a large PSU on one circuit.

evga 1300 has no problem running 2 S5, which is basically the same as one S7 as far as wattage is concerned.

[ATCkit]

And the buy button just went live, despite the large expense, I wonder how long until they sell out of batch #1?

Good luck to everyone buying these ! Looks like some great gear, but this time around, instead of buying a fancy new miner, I did the following and will HODL.



Lets see which will be the better investment 9 months down the road.

This seems like the smart thing to do at the end of the day!  As flashy as this hardware is, it's not looking like it is worth the inevitable risks with difficulty rises, and larger scale farm deployment.  I will sit this out too, and just purchase coin and HODL.  Best of luck to buyers!

I bought 0.5w/GH hardware for 1BTC/TH over 6 months ago - its basically paid for itself and still holds the same value on the resale market. This stuff at 2BTC/TH, without power supply, is insanity

Yes- close to $2900 CDN once we Canadians pay for shipping and import taxes. Unless you are in Quebec or have free electricity with your apartment rental, you can never Break Even.
bitcoinware.net has them on his site for $2,999.95 including XpressPost shipping. His markup has been low in the past. The advantage to buying from him is you can get them faster from him when they're in stock.  
So, going by bitcoinware's pricing, my estimate for we Canucks to buy direct from Bitmain is not far off.

EDIT: I wonder why no Canuck has set up a huge farm near James bay in Quebec. It could likely easily compete with Swedish and Chinese farms. That far north, cooling would be way easier than for the Chinese farms and almost as good as the northern Swedish farms.

[chaoman]

I can sell 1 coupon for .3 btc. price negotiable pm me!

[mavericklm]

I bought 0.5w/GH hardware for 1BTC/TH over 6 months ago - its basically paid for itself and still holds the same value on the resale market. This stuff at 2BTC/TH, without power supply, is insanity

add the risk of miner failure! and that is over a longer time!

miner broken and you got fucked like a royalty!

[Xialla]

This stuff at 2BTC/TH, without power supply, is insanity

uhh, I think that everybody in this thread is aware, that mining is more or less hobby for hardcore geeks and nobody is expecting any portion of profit. those buyers will hardly celebrate, if they will even achieve ROI.

if somebody is not aware about this fact and buying this magic noisy heat box for dreamed profit as money printer, he should it reconsider from scratch and visit other sections of this board.

let's hope, that nobody is here so dumb here..

[Starin]

This stuff at 2BTC/TH, without power supply, is insanity

uhh, I think that everybody in this thread is aware, that mining is more or less hobby for hardcore geeks and nobody is expecting any portion of profit. those buyers will hardly celebrate, if they will even achieve ROI.

if somebody is not aware about this fact and buying this magic noisy heat box for dreamed profit as money printer, he should it reconsider from scratch and visit other sections of this board.

let's hope, that nobody is here so dumb here..

I am pretty sure anybody buying the second round of products are obviously aware of this situation, well, if not, I am surprised they can actually buy bitcoin from an exchange.

Never the less, I want to get my hands on of these so I'll buy one later on, when I see full reviews and make sure what PSU to use.

[QuintLeo]

1300 watts seems a bit light to me when you consdier that many say you should calculate at 90% wattage availability. So 1300* .90 = 1170 watts.
Also, the advantage of using 3 smaller PSUs is you can use three different circuits as many of us don't have the capacity to run a large PSU on one circuit.

 15 amp 110 is the DEFAULT, that's good for up to a 1600 watt PS based on what companies are actually making.

 Also, the "1210 watt" figure Bitmain quotes is AT THE WALL with a 93% efficiency PS.
 The actual draw FROM the PS should be about 1125 watts - the EVGA commonly used should have about 15% in reserve, the X1250s I use would have a bit over 10%.

I wonder why no Canuck has set up a huge farm near James bay in Quebec.

 I'm presuming that's a reference to cheap hydropower
 Perhaps someone has done so but just doesn't choose to advertise?
 IIRC some of the Chinese farm locations I've seen mentioned are in "near the Himalayas" areas, those would tend to stay pretty cool most of the time.

I bought 0.5w/GH hardware for 1BTC/TH over 6 months ago

 You got S5s for around $250?
 MUST be nice to have had the money to take advantage of the price war back then.

 (yeah, I know BTC had a small roller-coaster ride this year though mostly down).

 Hint - BTC pricing changed since then, 2 weeks ago you couldn't find ANY .5W/GH machine much under about 1.5BTC per TH unless you got VERY lucky and a lot of them were running very close to 2 BTC/TH even USED.
 Also, Spondoolies got out of the market entirely so Bitmain lost pretty much any competition on new units (unless you wanted low-efficiency stuff like Avalon 4.x).

[Xialla]

Yes. It could be very loud.

please elaborate  

imho, you don't need to be rocket scientist to imagine, how noisy it will be. based on description in OP, it is using 12038 fan, well let's google:

http://www.fantech-electron.com/enu/product/view/dc-fan-12038.htm

so, based on web, it will be at least 40dB per fan and there will be 2 of them + fans from PSU (you will need one very big, or 2 just big) + noise from airflow (because miner itself is some tube, one side will suck the air and second one will blow it)

let's assume, that they will use the most powerful 12V fan with 2900rpm. let's calculate:

https://www.noisemeters.com/apps/db-calculator.asp

2x 51.3dB for fans 2x 30dB for PSU so ~55dB.

[Biodom]

Yes. It could be very loud.

please elaborate  

imho, you don't need to be rocket scientist to imagine, how noisy it will be. based on description in OP, it is using 12038 fan, well let's google:

http://www.fantech-electron.com/enu/product/view/dc-fan-12038.htm

so, based on web, it will be at least 40dB per fan and there will be 2 of them + fans from PSU (you will need one very big, or 2 just big) + noise from airflow (because miner itself is some tube, one side will suck the air and second one will blow it)

let's assume, that they will use the most powerful 12V fan with 2900rpm. let's calculate:

https://www.noisemeters.com/apps/db-calculator.asp

2x 51.3dB for fans 2x 30dB for PSU so ~55dB.

55dB is NOTHING if true.
S5 was 70-72dB
BTW, you are a little off with 2900rpm, I think S7 comes with 4200rpm fans

[Starin]

Yes. It could be very loud.

please elaborate  

imho, you don't need to be rocket scientist to imagine, how noisy it will be. based on description in OP, it is using 12038 fan, well let's google:

http://www.fantech-electron.com/enu/product/view/dc-fan-12038.htm

so, based on web, it will be at least 40dB per fan and there will be 2 of them + fans from PSU (you will need one very big, or 2 just big) + noise from airflow (because miner itself is some tube, one side will suck the air and second one will blow it)

let's assume, that they will use the most powerful 12V fan with 2900rpm. let's calculate:

https://www.noisemeters.com/apps/db-calculator.asp

2x 51.3dB for fans 2x 30dB for PSU so ~55dB.

55 dB is a dream. I am getting over 70 dB from a single s5. If its really 55 dB I would think for a second to order one unit for fun.