ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH

[mavericklm]

@beffje: lucky you! you did not get a used dusty unit! looks nice, nice pics!

Does it have the slightly whinny noise, because of the original 25mm fan in 38mm case? only at high rpm should be noticeable

[-droid-]

Yeah try 50 % and 593

What you running yours at Phil?

[beffje]

It all looks new. No dust ore so. Don't know about the sound. I fixed it right away. At 63 db now.

€40 sound killer


More  then enough space for my baby


Make a hole


S7 is underneath the power supply's

[philipma1957]

Yeah try 50 % and 593

What you running yours at Phil?

556 and 55%  but I have 2 in a small room  which is too hot due to warm weather in NJ.   79f yesterday 60f overnight.

once temp drops  to 50 f outside  I can go to 593 and 45-50%

Sound is fully managed.
The rooms temp is 89f  and will drift to 93 or 95f during the day
The gear is running at 57f to 59f
Setup is temporary until I finish cleaning my garage.

[Prelude]

Phil, the included data cables are long enough to stick 2 or 3 of these to 1 controller? Can we get a picture of how the 2 of them look together?

[philipma1957]

Phil, the included data cables are long enough to stick 2 or 3 of these to 1 controller? Can we get a picture of how the 2 of them look together?

I ordered custom cables

 I have a photo wait a minute


here is a shot of my controller loaded for 6 boards.  so:

 1)full
2) full
 3) full
4)full
5) blank
6)full
7) blank
8 )full
9) blank

2 custom long with 4 stock short  this allows for 1 cat 5 not 2 and 1 unused controller




this shows the long and the short cables.

[Biodom]

It all looks new. No dust ore so. Don't know about the sound. I fixed it right away. At 63 db now.

€40 sound killer
snipped images

Interesting.
Just one point.
During the operation miner sometimes accumulates static electricity (maybe because of all that blowing).
For example, when you have a sweater on and touch it with one hand, sometimes it gives you a bit of a jolt.
The point is, I wonder if it could spark with the metallic outer tube, causing electrostatic discharge (ESD).
ESD is known not to be good for electronics.
maybe grounding the tube would not be a bad idea.

[beffje]

It all looks new. No dust ore so. Don't know about the sound. I fixed it right away. At 63 db now.

€40 sound killer
snipped images

Interesting.
Just one point.
During the operation miner sometimes accumulates static electricity (maybe because of all that blowing).
For example, when you have a sweater on and touch it with one hand, sometimes it gives you a bit of a jolt.
The point is, I wonder if it could spark with the metallic outer tube, causing electrostatic discharge (ESD).
ESD is known not to be good for electronics.
maybe grounding the tube would not be a bad idea.

Good point. I will do that. But in the tube the S7 is sitting on some rubbers. So i think it's oke. But grounding it will be beter.

[kaltar]

He Phil where did you order your customs cables, i've been trying to find some for my S5 and i had no luck finding any.

[Prelude]

Phil, the included data cables are long enough to stick 2 or 3 of these to 1 controller? Can we get a picture of how the 2 of them look together?

I ordered custom cables

 I have a photo wait a minute


here is a shot of my controller loaded for 6 boards.  so:

 1)full
2) full
 3) full
4)full
5) blank
6)full
7) blank
8 )full
9) blank

2 custom long with 4 stock short  this allows for 1 cat 5 not 2 and 1 unused controller

snip


this shows the long and the short cables.

snip

Thanks for the info and pics. May I ask where you ordered the cables from, or what they're called so I can search for them?

[philipma1957]

jbbwocky spelled it wrong


J4bberwock  is correct

here is his thread


https://bitcointalk.org/index.php?topic=738527.0

here is my thread


 https://bitcointalk.org/index.php?topic=1173573.0

[philipma1957]

Phil, the included data cables are long enough to stick 2 or 3 of these to 1 controller? Can we get a picture of how the 2 of them look together?

I ordered custom cables

 I have a photo wait a minute


here is a shot of my controller loaded for 6 boards.  so:

 1)full
2) full
 3) full
4)full
5) blank
6)full
7) blank
8 )full
9) blank

2 custom long with 4 stock short  this allows for 1 cat 5 not 2 and 1 unused controller




this shows the long and the short cables.

[AriesIV10]

Phil, the included data cables are long enough to stick 2 or 3 of these to 1 controller? Can we get a picture of how the 2 of them look together?

I ordered custom cables

 I have a photo wait a minute


here is a shot of my controller loaded for 6 boards.  so:

 1)full
2) full
 3) full
4)full
5) blank
6)full
7) blank
8 )full
9) blank

2 custom long with 4 stock short  this allows for 1 cat 5 not 2 and 1 unused controller

snip


this shows the long and the short cables.

snip

Thanks for the info and pics. May I ask where you ordered the cables from, or what they're called so I can search for them?

Yes, Please let me know as well what the control board cables are called or the part number and where to order them. 

[Questor]

Ordered my units on day one and have not even recieved tracking info yet.  NOT Happy right now.

[Biodom]

Ordered my units on day one and have not even recieved tracking info yet.  NOT Happy right now.

this is strange...did you check your bitmaintech account...what does it say? does it say: shipped or unshipped?
also, check your email (including spam)

[torepia]

Ordered my units on day one and have not even recieved tracking info yet.  NOT Happy right now.

Did you pay with USD?

[AriesIV10]

Looks like they are all sold out of the APW3-12-1600-B2 PSUs as well.

[Biodom]

Looks like they are all sold out of the APW3-12-1600-B2 PSUs as well.

Ok, but you can use EVGA 1300 with an addition of two PCI-E extenders on single branch cables. Cost for used evga is ~$125-130 on ebay, maybe slightly less here if you can find it.

[philipma1957]

Yes, Please let me know as well what the control board cables are called or the part number and where to order them. 

here is the seller and he has them in stock

J4bberwock

https://bitcointalk.org/index.php?topic=1173573.msg12530196#msg12530196

[Questor]

Ordered my units on day one and have not even recieved tracking info yet.  NOT Happy right now.

this is strange...did you check your bitmaintech account...what does it say? does it say: shipped or unshipped?
also, check your email (including spam)

My Bitmain account has shown "Shipped" in the status since my power supplies shipped on the 2nd.  I have sent several emails, all have been returned with boilerplate responses.  "Miners will ship in order" and:

"Hi,
S7 has been sold out now. but it will be available soon.
Suggest you consider prepare bitcoins during this time and place order once it's available again.

Best Regards

BITMAIN"

AND:

"Hi,
We're shipping out miners following order of full payment.
Once miners are ready, we'll ship them out.
Please wait for update patiently.

Best Regards

BITMAIN"

I think they are seeing my order as "shipped" because of the power supplies and have not fulfilled it, and even after four emails with replies like the above I can't get a personalized response.