Oct 11 to Nov 11 Sidehack stick pool club.

[HerbPean]

running debian jessie in virtualbox 4.3.12 in a freenas 9.3 jail on my server in the basement.

I can compile and run cgminer-gekko. the compac is seen fine in debian. cgminer fires up and sees the clubs solo pool and connects. I get the welcome and block found messages. but it wont mine. the errors are as follows:

Code:

no valid hashes for over 10 secs, attempting to restart.
compac 1 attempted reset got error:(0) LIBUSB_SUCCESS
device failed to respond to restart
HOTPLUG: Gekko adding compac 2

it does this over and over with the compac n number increasing each time.

any suggestions?  this compac runs fine on my windows HTPC.

EDIT: the compacs led stays steady green. no frequency arguments so it should run stock speed. this stick runs at 185Mhz on the HTPC so it should run fine stock frequency..

I had the same issue when I was trying to push my compact with a regular USB from my PC. I was running at freq 150 and it was just too much for the usb. I dropped it down to 125 and it runs perfectly without any HW now.  6.867GH/s

[notlist3d]

running debian jessie in virtualbox 4.3.12 in a freenas 9.3 jail on my server in the basement.

I can compile and run cgminer-gekko. the compac is seen fine in debian. cgminer fires up and sees the clubs solo pool and connects. I get the welcome and block found messages. but it wont mine. the errors are as follows:

Code:

no valid hashes for over 10 secs, attempting to restart.
compac 1 attempted reset got error:(0) LIBUSB_SUCCESS
device failed to respond to restart
HOTPLUG: Gekko adding compac 2

it does this over and over with the compac n number increasing each time.

any suggestions?  this compac runs fine on my windows HTPC.

EDIT: the compacs led stays steady green. no frequency arguments so it should run stock speed. this stick runs at 185Mhz on the HTPC so it should run fine stock frequency..

I had the same issue when I was trying to push my compact with a regular USB from my PC. I was running at freq 150 and it was just too much for the usb. I dropped it down to 125 and it runs perfectly without any HW now.  6.867GH/s

What is your voltage set to? It has a example here - https://bitcointalk.org/index.php?topic=1173963.msg12359541#msg12359541

Assuming USB has enough power it should hit 8GH pretty easy.  But not all USB slots are equal as far as power they put out.

[edonkey]

@ edonkey aarons6stick belongs on list

I am on a tablet right now. I will check the list to be sure the rest is good.

OK, done.

If you want write access to the list file, I can get you the instructions via PM or email.

[vapourminer]

running debian jessie in virtualbox 4.3.12 in a freenas 9.3 jail on my server in the basement.

I can compile and run cgminer-gekko. the compac is seen fine in debian. cgminer fires up and sees the clubs solo pool and connects. I get the welcome and block found messages. but it wont mine. the errors are as follows:

Code:

no valid hashes for over 10 secs, attempting to restart.
compac 1 attempted reset got error:(0) LIBUSB_SUCCESS
device failed to respond to restart
HOTPLUG: Gekko adding compac 2

it does this over and over with the compac n number increasing each time.

any suggestions?  this compac runs fine on my windows HTPC.

EDIT: the compacs led stays steady green. no frequency arguments so it should run stock speed. this stick runs at 185Mhz on the HTPC so it should run fine stock frequency..

I had the same issue when I was trying to push my compact with a regular USB from my PC. I was running at freq 150 and it was just too much for the usb. I dropped it down to 125 and it runs perfectly without any HW now.  6.867GH/s

What is your voltage set to? It has a example here - https://bitcointalk.org/index.php?topic=1173963.msg12359541#msg12359541

Assuming USB has enough power it should hit 8GH pretty easy.  But not all USB slots are equal as far as power they put out.

yeah Im wondering if the servers front USB port is underpowered.

voltage pot is set about 4 o'clock relative to the heatsink being "up" and the usb plug "down." without a clock argument on the command line I believe it runs at 125Mhz, since it runs at 185 Mhz with that pot setting on the HTPC Ill leave the voltage pot for the moment.

Ill try a rear port and/or a powered hub and give it another go.

[pepto]

In edonkeys minera-cgminer,

Manual options
You have chosen to add all options manually, I will only add for you the pools list, you have to take care of the rest.


--compac-freq 225


Did I read somewhere that I can add a 'suggested difficulty' after the frequency?

I ask because when I decide to change something and get mining again, it seems I have to wait (up to 1/2 hour)  till I hit a 1K share for cksolo to down regulate my share difficulty.

Is there some line I can type in there to start out at diff 21 or so. A cut and paste line would be good as I don't understand the dashes and overall syntax. TX.

[cryptoglance]

Hi all,

Just want to give you an update.

I wrote a small independent app that will log every worker in the list that was provided on Page 7 by philipma1957.

Currently it's set to run every 5 minutes.... No frontend available yet though, will work on that tomorrow.

Here's a screenshot of all the data i'm logging. It's saved per date, and updates throughout the day.

[vapourminer]

Here's a screenshot of all the data i'm logging. It's saved per date, and updates throughout the day.

https://i.imgur.com/eiilHjm.png

nice!!

[VirosaGITS]

Hi all,

Just want to give you an update.

I wrote a small independent app that will log every worker in the list that was provided on Page 7 by philipma1957.

Currently it's set to run every 5 minutes.... No frontend available yet though, will work on that tomorrow.

Here's a screenshot of all the data i'm logging. It's saved per date, and updates throughout the day.

https://i.imgur.com/eiilHjm.png

This output is pretty nice, are you able to, when displayed on frontend, to have any lines with a 0 as value highlighted yellow and highlighted red if all values at are at 0?

Yellow would mean not currently mining but mined in last week.

Red would mean no accepted share in the last week.

[Meech]

I'm still quite happy with this hub.  It works in linux/Pi as well as Windows and is 2.0a per port.  Been holding steady at 300mhz for a couple weeks. Superbpag 7 Port Portable Multi USB Charger 70 Watt 14A with USB 3.0

[philipma1957]

looks nice.

I am checking out all details.  on the list below you do not need lastupdate  

ck explained what it is (I forgot what he said)

but it is the same for all of us so it is not needed.

the rest looks good.

Hi all,

Just want to give you an update.

I wrote a small independent app that will log every worker in the list that was provided on Page 7 by philipma1957.

Currently it's set to run every 5 minutes.... No frontend available yet though, will work on that tomorrow.

Here's a screenshot of all the data i'm logging. It's saved per date, and updates throughout the day.

[philipma1957]

As an aside we have 30 members and slimepuppy has his sticks back with us.

So this means we have 1 open slot left since larrys12 has not mined this round.

One more can join.

We also have a few idol players but they still stay on since they have hash shares.


I think that is only TheRealSteve


so 30 members

28 shares from Part A stick fund. only TheRealSteve and larrys12 do not get a share from this.

29 hash shares from Part B hash fund ------------Only larrys12 has no shares

[cryptoglance]

looks nice.

I am checking out all details.  on the list below you do not need lastupdate  

ck explained what it is (I forgot what he said)

but it is the same for all of us so it is not needed.

the rest looks good.

Dont reference this image. I was just showing what data is logged incase we wanted to see more data.  The link shared with you via PM is only the shares per worker,  with the most recent share time at the top.

[SlimePuppy]

... and slimepuppy has his sticks back with us...

I had all my equipment off while I was out of town.  You're stuck with me for a few more months at least.

[notlist3d]

looks nice.

I am checking out all details.  on the list below you do not need lastupdate  

ck explained what it is (I forgot what he said)

but it is the same for all of us so it is not needed.

the rest looks good.

Dont reference this image. I was just showing what data is logged incase we wanted to see more data.  The link shared with you via PM is only the shares per worker,  with the most recent share time at the top.

Thanks for all the work your putting into it.  Very cool to see a product support a club like this.

Cant wait to see it and try it out myself.

[edonkey]

In edonkeys minera-cgminer,

Manual options
You have chosen to add all options manually, I will only add for you the pools list, you have to take care of the rest.


--compac-freq 225


Did I read somewhere that I can add a 'suggested difficulty' after the frequency?

I ask because when I decide to change something and get mining again, it seems I have to wait (up to 1/2 hour)  till I hit a 1K share for cksolo to down regulate my share difficulty.

Is there some line I can type in there to start out at diff 21 or so. A cut and paste line would be good as I don't understand the dashes and overall syntax. TX.

I went with a difficulty of 32 for my two units. Here's the syntax:

Code:

--suggest-diff 32

There's a nice write up of the formula from Kano. I think it's in the first thread when the pool was in beta.

[philipma1957]

looks nice.

I am checking out all details.  on the list below you do not need lastupdate  

ck explained what it is (I forgot what he said)

but it is the same for all of us so it is not needed.

the rest looks good.

Dont reference this image. I was just showing what data is logged incase we wanted to see more data.  The link shared with you via PM is only the shares per worker,  with the most recent share time at the top.

Okay .

All that is logged and is available if we hit a block.
That works.

[edonkey]

looks nice.

I am checking out all details.  on the list below you do not need lastupdate  

ck explained what it is (I forgot what he said)

but it is the same for all of us so it is not needed.

the rest looks good.

Dont reference this image. I was just showing what data is logged incase we wanted to see more data.  The link shared with you via PM is only the shares per worker,  with the most recent share time at the top.

Okay .

All that is logged and is available if we hit a block.
That works.

Even if it's not the final image, it does look nice and is extremely useful. Thanks for pulling this together cryptoglance.

It might be worth keeping the "lastupdate" to know when a worker last mined in case they've dropped out. This won't affect winnings (if there are any), but it still might be useful to be able to say that worker "blah" has not mined since X date.

As I'm sure cryptoglance is aware, the lastupdate int value is just the the number of seconds since the C epoch. It's easy to convert to an actual date/time value.

[cryptoglance]

Even if it's not the final image, it does look nice and is extremely useful. Thanks for pulling this together cryptoglance.

It might be worth keeping the "lastupdate" to know when a worker last mined in case they've dropped out. This won't affect winnings (if there are any), but it still might be useful to be able to say that worker "blah" has not mined since X date.

As I'm sure cryptoglance is aware, the lastupdate int value is just the the number of seconds since the C epoch. It's easy to convert to an actual date/time value.

This is the current interface. We only really care about shares.


Going to makr a few more updates tomorrow and will share the url tomorrow

[VirosaGITS]

Even if it's not the final image, it does look nice and is extremely useful. Thanks for pulling this together cryptoglance.

It might be worth keeping the "lastupdate" to know when a worker last mined in case they've dropped out. This won't affect winnings (if there are any), but it still might be useful to be able to say that worker "blah" has not mined since X date.

As I'm sure cryptoglance is aware, the lastupdate int value is just the the number of seconds since the C epoch. It's easy to convert to an actual date/time value.

This is the current interface. We only really care about shares.
https://i.imgur.com/xgqPt8B.png

Going to makr a few more updates tomorrow and will share the url tomorrow

Delicious. Will you add 100.000% on the right to get an easy payout estimate if we ever get a block?

[notlist3d]

Even if it's not the final image, it does look nice and is extremely useful. Thanks for pulling this together cryptoglance.

It might be worth keeping the "lastupdate" to know when a worker last mined in case they've dropped out. This won't affect winnings (if there are any), but it still might be useful to be able to say that worker "blah" has not mined since X date.

As I'm sure cryptoglance is aware, the lastupdate int value is just the the number of seconds since the C epoch. It's easy to convert to an actual date/time value.

Going to makr a few more updates tomorrow and will share the url tomorrow

Thank you for all your coding time!  Truly is great to see. 

Cant wait till we are able to look at URL to see it.  No more phil having to copy/paste so many times.  Great product!