Hi guys
Can someone explain ne why my futurebit usb miner dont got a voltage adjustment? Huh
You can See it on the picture :: i only can Mine with 144mhz frequency
Please help me how i can get the Best of it or how i can Change the voltage via Software
https://postimg.org/image/cnj8vkw33/You need to look here for settings info.
https://bitcointalk.org/index.php?topic=1248914.0Frequency:
The MoonLander can run on a very wide range of speed and efficiency, and leaves a lot of tuning up to you guys. Make sure you read up on the Hardware section below where I go more in-depth on frequency and voltage tuning.
The Moonlander has a default frequency setting of 144mhz, and can range from 104mhz to 400mhz.
To change the frequency just edit the number after —set MLD:clock= in the startup scrypt. You cant just put any number you want in there, otherwise it will default to base 104mhz. Between 104-200 mhz you can set the frequency to any number that is a multiple of 8, so 104, 112, 120 are all valid frequencies.
Between 200-400 mhz you can use any number that is a multiple of 16, so 256, 320 etc are all valid.
I don't recommend going past 352 Mhz on these unless you have really good cooling, as they get really unstable past the frequency and need to turn up voltage past 1v.
