bfgminer --scrypt -S all -o stratum+tcp://pool:port -u user -p pass -S zeusminer:\\.\COMx --set zeusminer:clock=328 --set zeusminer:chips=128 --set zus:ignore_golden_nonce=1
bfgminer --scrypt -S all -o stratum+tcp://pool:port -u user -p pass --set zeusminer:clock=328 --set zeusminer:chips=128
bfgminer --scrypt -S all -o stratum+tcp://pool:port -u user -p pass --set zeusminer:clock=328 --set zeusminer:chips=128 --set zus:ignore_golden_nonce=1
Make Sure this is
-S all is after --scrypt,
if that doesn't work you may need to open it up and check the dip switches .
https://zeusminer.com/forums/topic/thunder-x3-running-at-15mhs/The Board with the USB cable going into it, Yes all switches off to give it device 0
Now the next board it plugs in too I set DIP #1 on and the rest off give it device 1
Now the next board it plugs in too I set DIP #2 on and the rest off give it device 2
Now the last board has to be set with DIP #3 and DIP #4 on and the rest off. this gives it the device 3 commmand with a terminate command at the end.
if that doesn't work , check the PSU .
make sure that pool supports that type of script miner. why not use BFG 5.4.1 it handles my cyclone nicely on my pi .
or even try a different pool.
did you try
https://bitcointalk.org/index.php?topic=596620.0
