Jan 11 to Feb 11 Sidehack Compac Stick pool new 30 day run. Club to close Feb 12

[SFMiner]

I just updated mine - sorry for the delay!  

Mine is:

1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11SFMinersticks

[1714732176]

1714732176

[1714732176]

1714732176

[1714732176]

1714732176

[philipma1957]

I just updated mine - sorry for the delay!  

Mine is:

1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11SFMinersticks

Thank you

missing these below



11)   Chris_Sabianstick active with old address

15)   baktegonStick  active with old address



21)   sloopysticks active with both old addresses
21a) sloopydonation






37)  stef942stick  not active

[VirosaGITS]

I just updated mine - sorry for the delay!  

Mine is:

1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11SFMinersticks

Thank you

missing these below

3)    VirosaGITSdonation active  still on old addresses
3a)  VirosaGITSstick   ACTIVE


11)   Chris_Sabianstick active with old address

15)   baktegonStick  active with old address



21)   sloopysticks active with both old addresses
21a) sloopydonation

27)   Meechstick    active with this old address
27a) MeechS2Donation

29)   cryptoglancestick  not active
29a) cryptoglancestick2 not active   



37)  stef942stick  not active

40)  buysolarstick active old sticks

42)  n8dogf1stick  active has said he will change

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11VirosaGITSstick

You can prune the donation one for now, i'm not sure when/if i will replug a S1 for donation. Some miners may have old failover on it. Just don't track them, consider it a real untracked donation or such?

[philipma1957]

I just updated mine - sorry for the delay!  

Mine is:

1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11SFMinersticks

Thank you

missing these below

11)   Chris_Sabianstick active with old address

15)   baktegonStick  active with old address



21)   sloopysticks active with both old addresses
21a) sloopydonation




37)  stef942stick  not active

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11VirosaGITSstick

You can prune the donation one for now, i'm not sure when/if i will replug a S1 for donation. Some miners may have old failover on it. Just don't track them, consider it a real untracked donation or such?

you can merge it with the sticks if you want  just change the  address on it to the one above.

[buysolar]

Updated it.

[baktegon]

I just updated mine - sorry for the delay!  

Mine is:

1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11SFMinersticks

Thank you

missing these below



11)   Chris_Sabianstick active with old address

15)   baktegonStick  active with old address



21)   sloopysticks active with both old addresses
21a) sloopydonation

27)   Meechstick    active with this old address
27a) MeechS2Donation

29)   cryptoglancestick  not active
29a) cryptoglancestick2 not active    



37)  stef942stick  not active

40)  buysolarstick active old sticks

42)  n8dogf1stick  active has said he will change

I'm working on it! My cgminer wouldn't recognize the sticks again after a reboot so i tried updating my raspberry pi to fix it, and that of course broke everything. It's really unstable which is a bummer, and my configuration file won't save, blah blah blah.

Right so, things are broken, and I'll just have to re-install the OS again on the pi since it's all goofed now, and hopefully I'll be back online tonight or tomorrow morning. Pro tip: don't use a raspberry pi version 1, they're troublesome!

[Chris_Sabian]

updated

[philipma1957]

I just updated mine - sorry for the delay!  

Mine is:

1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11SFMinersticks

Thank you

missing these below



11)   Chris_Sabianstick active with old address

15)   baktegonStick  active with old address



21)   sloopysticks active with both old addresses
21a) sloopydonation

2  



37)  stef942stick  not active

I'm working on it! My cgminer wouldn't recognize the sticks again after a reboot so i tried updating my raspberry pi to fix it, and that of course broke everything. It's really unstable which is a bummer, and my configuration file won't save, blah blah blah.

Right so, things are broken, and I'll just have to re-install the OS again on the pi since it's all goofed now, and hopefully I'll be back online tonight or tomorrow morning. Pro tip: don't use a raspberry pi version 1, they're troublesome!

keep working on it.  i gave up with windows 7, 8, 10

 I do linux on a pc  it runs the sticks and a full node

[spazzdla]

Phil;

Do you have a short write up by chance on how to run the miners on Ubuntu?

[bctmke]

Phil;

Do you have a short write up by chance on how to run the miners on Ubuntu?

What are you looking for?

Like totally step by step or like "ive installed ubuntu where do I go from here?"

The second one is more likely to get completed (its far shorter and easier).

I can do that if needed

[philipma1957]

Phil;

Do you have a short write up by chance on how to run the miners on Ubuntu?

there was step by step on how to install linux on a pc   it is on a thread maybe mikestang told me  let me look back for the link

this is me getting annoyed with windows

https://bitcointalk.org/index.php?topic=1173963.msg12416957#msg12416957
https://bitcointalk.org/index.php?topic=1173963.msg12421972#msg12421972
https://bitcointalk.org/index.php?topic=1173963.msg12422590#msg12422590
https://bitcointalk.org/index.php?topic=1173963.msg12424007#msg12424007
https://bitcointalk.org/index.php?topic=1173963.msg12446428#msg12446428
https://bitcointalk.org/index.php?topic=1173963.msg12446428#msg12446428

all above are windows still looking for linux starts below

https://bitcointalk.org/index.php?topic=1173963.msg12466273#msg12466273




https://bitcointalk.org/index.php?topic=1173963.msg12469877#msg12469877  ends here read the posts inbetween

and it was Jake36 that helped me the most.

[Biodom]

Phil;

Do you have a short write up by chance on how to run the miners on Ubuntu?

there was step by step on how to install linux on a pc   it is on a thread maybe mikestang told me  let me look back for the link

it very much depends on whether you want it to run in dual boot mode (win AND Ubuntu) or just replace windows with ubuntu (much easier).
Second, it depends won whether you have win 7 or win 8-10 computer. The latter ones have UEFI BIOS (instead of Legacy) and it really depends on the computer.
If yours is HP win8, I can provide some writeup.
This description is OK, but every BIOS is different:
http://askubuntu.com/questions/221835/installing-ubuntu-on-a-pre-installed-windows-with-uefi
In short:
1. first, you need to create a partition for Ubuntu by shrinking your Windows partition
1. then, you'll need to right click on startup, go to power options and unclick "fast startup" there.
this is described here:
http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html
2. then restart while holding the shift key...you will restart into "bluish menu"
then "Troubleshoot', then "UEFI firmware settings"
you will be asked to reboot or restart and you will be booted into BIOS where you can change things.
IMPORTANT:If Windows 8 was installed with UEFI enabled, it is highly recommended to stay in UEFI, although if you still want to disable it for specific reasons you can, GRUB will create the bootable part for Windows 8. But if you do disable UEFI and want to access Windows 8 afterwards (before installing Ubuntu), it will not work since the boot part for Windows 8 needs UEFI (Again the Dual Boot problem).

For my HP win 8.1 computer, all I needed to do was to change boot order from first being windows boot manager to first being DVD, second flash drive, then third Windows boot manager. The BIOS menu commands are archaic, but if you messed up, you can always save with default settings of save without changes and try again. The ONLY other thing that I had to do was to again disable fast boot, now in BIOS. I left secure boot and other settings in SECURITY area untouched because when I tried to do it, it wouldn't start from the DVD.
Then, save the BIOS settings and restart. Next time, insert ubuntu DVD or usb stick, again press Shift key on restart, but now in bluish menu click on UEFI icon, then chose your DVD or USB (it should also have UEFI in its title), then restart. Hopefully, you will be booted into ubuntu installer and proceed from there.

Jake36 provided an almost perfect writeup how to install cgminer-gekko on Linux (in support thread) with only caveat being that at the end you should

Code:

cd cgminer-gekko-rev2

instead of cd cgminer-gekko, then run as sudo.

[n8dogf1]

Sorry for the delay gents, I was out of town for the week. Just made the change, thanks.

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11n8dogf1stick

[notlist3d]

Phil;

Do you have a short write up by chance on how to run the miners on Ubuntu?

there was step by step on how to install linux on a pc   it is on a thread maybe mikestang told me  let me look back for the link

this is me getting annoyed with windows

https://bitcointalk.org/index.php?topic=1173963.msg12416957#msg12416957
https://bitcointalk.org/index.php?topic=1173963.msg12421972#msg12421972
https://bitcointalk.org/index.php?topic=1173963.msg12422590#msg12422590
https://bitcointalk.org/index.php?topic=1173963.msg12424007#msg12424007
https://bitcointalk.org/index.php?topic=1173963.msg12446428#msg12446428
https://bitcointalk.org/index.php?topic=1173963.msg12446428#msg12446428

all above are windows still looking for linux starts below

https://bitcointalk.org/index.php?topic=1173963.msg12466273#msg12466273




https://bitcointalk.org/index.php?topic=1173963.msg12469877#msg12469877  ends here read the posts inbetween

and it was Jake36 that helped me the most.

I might suggest looking at RPI.  They use so little electricity it makes a lot of sense when running a lotto miner.   I have a RPI 2 running right now on mine but a RPI 1 would work fine.

It is Linux if you use the raspbian OS.  So nice not messing with windows.  I highly suggest RPI route.

[hedgy73]

Does anyone know if there's a setup guide for using a RPI as a controller for these sticks? I did install the software listed on the OP of Sidehacks official support thread but didn't know how to get started even at the first command prompt as I haven't done anything like that before .

I have not yet tested it but edonkey was nice enough to upload a custom minera image with cgminer-gekko enabled as a custom miner.  You can set the frequency under manual options as: --compac-freq 150.  Link:
https://dbtbmm05cubzd.cloudfront.net/cryptocurrency/mods/minera_compac_mod.zip

[Jake36]

Does anyone know if there's a setup guide for using a RPI as a controller for these sticks? I did install the software listed on the OP of Sidehacks official support thread but didn't know how to get started even at the first command prompt as I haven't done anything like that before .

I have not yet tested it but edonkey was nice enough to upload a custom minera image with cgminer-gekko enabled as a custom miner.  You can set the frequency under manual options as: --compac-freq 150.  Link:
https://dbtbmm05cubzd.cloudfront.net/cryptocurrency/mods/minera_compac_mod.zip

The post notlist3d did has the link to the post I did, it would be the same for putting cgminer-gekko onto the Pi (Raspian is a Linux build) as it is for putting it onto a laptop/desktop computer (those are the steps I did putting cgminer-gekko onto my Pi).

If your talking about putting Raspbian onto the SD card to run the Pi, look at https://www.raspberrypi.org/, they have all the directions and links that you need to get the Pi running Raspbian and then just follow the steps from the above post.

EDIT: follow the steps for putting Raspbian onto the SD card, but change it to minera image you listed where they say Raspbian.

[hedgy73]

Does anyone know if there's a setup guide for using a RPI as a controller for these sticks? I did install the software listed on the OP of Sidehacks official support thread but didn't know how to get started even at the first command prompt as I haven't done anything like that before .

I have not yet tested it but edonkey was nice enough to upload a custom minera image with cgminer-gekko enabled as a custom miner.  You can set the frequency under manual options as: --compac-freq 150.  Link:
https://dbtbmm05cubzd.cloudfront.net/cryptocurrency/mods/minera_compac_mod.zip

The post notlist3d did has the link to the post I did, it would be the same for putting cgminer-gekko onto the Pi (Raspian is a Linux build) as it is for putting it onto a laptop/desktop computer (those are the steps I did putting cgminer-gekko onto my Pi).

If your talking about putting Raspbian onto the SD card to run the Pi, look at https://www.raspberrypi.org/, they have all the directions and links that you need to get the Pi running Raspbian and then just follow the steps from the above post.

Thank you I'll take a look later .

[philipma1957]

@ cryptoglance

I can't enter 42) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11Chris_Sabianstick


Jan11Chris_Sabianstick


I enter it says successful  and it does not show



 http://poolmonitor.cryptoglance.info/



I will try again  no go

So  is it the  _  between  Chris _   Sabianstick?

[cryptoglance]

@ cryptoglance

I can't enter 42) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11Chris_Sabianstick


Jan11Chris_Sabianstick


I enter it says successful  and it does not show



 http://poolmonitor.cryptoglance.info/



I will try again  no go

So  is it the  _  between  Chris _   Sabianstick?

Ill take a look today.

Just an update: Datacentre us facing a power outage,  making poolmonitor unreachable. Ill let you know when power is back.

[Meech]

Sorry didn't know the address changed.  Will change shortly and please remove my S2 donation spot.