Jan 11 to Feb 11 Sidehack Compac Stick pool new 30 day run. Club to close Feb 12

[HerbPean]

My friend's stick is now mining under my guard ;-)

sticks++

Herb

[1714721743]

1714721743

[sloopy]

Phil,

I combined sticks in one address now.

[philipma1957]

Phil,

I combined sticks in one address now.

thank you I will update in a bit

[philipma1957]

okay I checked here

http://poolmonitor.cryptoglance.info

mining on old addresses   two left!





Chris_Sabianstick   this is an issue with cryptoglance 's pool monitor   seems to not like the  _  in the forum name

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11Chris_Sabianstick


{"hashrate1m": "12G", "hashrate5m": "10.7G", "hashrate1hr": "9.57G", "hashrate1d": "8.6G", "hashrate7d": "2.73G", "lastupdate": 1453077974, "shares": 453330, "bestshare": 1326572.3385600001, "bestever": 1326572}




baktegonStick  is having a cgminer issue



sloopysticks      where is your new address I can't find you.
sloopydonation


found sloopy:

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.sloopysticks


please alter to this one below:

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11sloopysticks











I also did a pdf of everything.

It is on a custom sized file for a sheet of paper 68 inches by 68 inches  it fits every entry
If you look below you can see all the newer info is to the far right.
once those nine older members finish I will do another pdf of the full set and send the file to crpytoglance and z0u

we can then delete the top part of the list.

[baktegon]

I have prevailed! Sort of, I have several questions.

Jan11baktegonSticks

I did sticks plural cause I've always had 4 sticks running on my address but my setup was too finicky to change it, clearly. Are we planning on changing the address name with each month...?

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11baktegonSticks

1) Does anyone know how to change the frequency of the sticks once you've started Cgminer? They default to 125 but I'd like to do 200

2) Anyone know why sudo ./cgminer -o stratum+tcp://solo.ckpool.org:3333 -u 1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11baktegonSticks --compac-freq 200 would return a bash cgminer not found error. I can navigate to the folder in my file system on the raspberry pi and start the executable however so i'm not sure what i'm doing wrong...

3) I also think one of my sticks burned out It returns an error about usb lib or something and then goes to status ZOMBIE in cgminer. Any way to check if my stick is working on Windows? Since the pi is finally back up I don't want to mess around with it.

[HerbPean]

I have prevailed! Sort of, I have several questions.

Jan11baktegonSticks

I did sticks plural cause I've always had 4 sticks running on my address but my setup was too finicky to change it, clearly. Are we planning on changing the address name with each month...?

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11baktegonSticks

1) Does anyone know how to change the frequency of the sticks once you've started Cgminer? They default to 125 but I'd like to do 200

2) Anyone know why sudo ./cgminer -o stratum+tcp://solo.ckpool.org:3333 -u 1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11baktegonSticks --compac-freq 200 would return a bash cgminer not found error. I can navigate to the folder in my file system on the raspberry pi and start the executable however so i'm not sure what i'm doing wrong...

3) I also think one of my sticks burned out It returns an error about usb lib or something and then goes to status ZOMBIE in cgminer. Any way to check if my stick is working on Windows? Since the pi is finally back up I don't want to mess around with it.

1) You're already doing it in #2 --compac-freq 200

2) Strange your string looks all good ... here's mine> -o stratum+tcp://solo.ckpool.org:3334 -u 1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11HerbPeanStick --compac-freq 125 --suggest-diff 16

3) I would not think so. Yes, you can run CGMiner in Windows. Try mine => https://www.dropbox.com/s/f7a4sqgquknaf1h/cgminer-gekko-win32.rar?dl=0

EDIT: you probably be required to install zadig_2.1.2.exe ... and change the driver of the compact to WINUsb

[philipma1957]

okay I checked here

http://poolmonitor.cryptoglance.info

mining on old addresses   one left!





Chris_Sabianstick   this is an issue with cryptoglance 's pool monitor   seems to not like the  _  in the forum name

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11Chris_Sabianstick


{"hashrate1m": "12G", "hashrate5m": "10.7G", "hashrate1hr": "9.57G", "hashrate1d": "8.6G", "hashrate7d": "2.73G", "lastupdate": 1453077974, "shares": 453330, "bestshare": 1326572.3385600001, "bestever": 1326572}




baktegonStick  is having a cgminer issue



sloopysticks      where is your new address I can't find you.
sloopydonation


found sloopy:

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.sloopysticks


please alter to this one below:

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11sloopysticks











I also did a pdf of everything.

It is on a custom sized file for a sheet of paper 68 inches by 68 inches  it fits every entry
If you look below you can see all the newer info is to the far right.
once those nine older members finish I will do another pdf of the full set and send the file to crpytoglance and z0u

we can then delete the top part of the list.

[HerbPean]

I hope everybody is ready for next month to prepare to change their workername so you don't do all the work during 2 weeks+ again IF WE CHANGE IT

[dukebox_1st]

@ cryptoglance

I can't enter 42) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11Chris_Sabianstick


Jan11Chris_Sabianstick


I enter it says successful  and it does not show



 http://poolmonitor.cryptoglance.info/



I will try again  no go

So  is it the  _  between  Chris _   Sabianstick?

Not sure if it's the same issue with the underscore but I can't see my jan11 entry on there either? http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.jan11dukebox_1ststick

[baktegon]

I have prevailed! Sort of, I have several questions.

Jan11baktegonSticks

I did sticks plural cause I've always had 4 sticks running on my address but my setup was too finicky to change it, clearly. Are we planning on changing the address name with each month...?

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11baktegonSticks

1) Does anyone know how to change the frequency of the sticks once you've started Cgminer? They default to 125 but I'd like to do 200

2) Anyone know why sudo ./cgminer -o stratum+tcp://solo.ckpool.org:3333 -u 1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11baktegonSticks --compac-freq 200 would return a bash cgminer not found error. I can navigate to the folder in my file system on the raspberry pi and start the executable however so i'm not sure what i'm doing wrong...

3) I also think one of my sticks burned out It returns an error about usb lib or something and then goes to status ZOMBIE in cgminer. Any way to check if my stick is working on Windows? Since the pi is finally back up I don't want to mess around with it.

1) You're already doing it in #2 --compac-freq 200

2) Strange your string looks all good ... here's mine> -o stratum+tcp://solo.ckpool.org:3334 -u 1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11HerbPeanStick --compac-freq 125 --suggest-diff 16

3) I would not think so. Yes, you can run CGMiner in Windows. Try mine => https://www.dropbox.com/s/f7a4sqgquknaf1h/cgminer-gekko-win32.rar?dl=0

EDIT: you probably be required to install zadig_2.1.2.exe ... and change the driver of the compact to WINUsb

Thanks for the Windows instance Herb, it works perfectly!

Right sorry, I mean yes I can set the frequency when the entire command line works, but that didn't work for me. So I was wondering if you can change the frequency after cgminer starts.

However I'm still getting the error with my stick, err:(0) LIBUSB_SUCCESS
http://s15.postimg.org/xehnzitt7/usb_error.jpg

[HerbPean]

Thanks for the Windows instance Herb, it works perfectly!

Right sorry, I mean yes I can set the frequency when the entire command line works, but that didn't work for me. So I was wondering if you can change the frequency after cgminer starts.

However I'm still getting the error with my stick, err:(0) LIBUSB_SUCCESS

I see, I misunderstood the issue. Try a lower diff at start and add this to your command line --suggest-diff 16

1K is too high ...

You can also use on of the bat file in the zip i gave you.

[philipma1957]

 http://poolmonitor.cryptoglance.info/

Not sure if it's the same issue with the underscore but I can't see my jan11 entry on there either? http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.jan11dukebox_1ststick
[/quote]

Okay I see it is missing .  I just tried to enter it.  I will check it again in 10 minutes


@ sloopy  please  correct   you for got to do   Jan11

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.sloopysticks  >>> wrong


http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11sloopysticks >>> please do this

[bctmke]

However I'm still getting the error with my stick, err:(0) LIBUSB_SUCCESS

Are you running the stock cgminer (and not the version for these devices)?

If so - that error is normal. (and not really a problem).

You'll want to use the version created for these sticks http://gekkoscience.com/misc/cgminer-gekko-win32.zip

This will also let you set the frequency higher too

[zOU]

They take a moment to ramp up the Ghs, give them a couple of minutes.

Also, please address that in the gekkoscience stick support thread

[philipma1957]

So as of now

 http://poolmonitor.cryptoglance.info/

has 1 error due to a _ bug

jan11duke_1ststick
 
will not enter.


Not sure if it's the same issue with the underscore but I can't see my jan11 entry on there either? http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.jan11dukebox_1ststick

@ cryptoglance please correct   jan11duke_1ststick
____________________________________________________________________
___________________________________________________________________

@ sloopy  please  correct   your miners  

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.sloopysticks          >>> wrong


http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11sloopysticks    >>> please do it  this way


At this point in time  we need only fix these two.

 one is on cryptoglance to fix. >>>>>   jan11duke_1ststick

and sloopy     please read the pm and fix it. 


 we will then have everyone listed on the bottom section of the sheet.

and we can archive the top and then remove it.

[Jake36]

I have prevailed! Sort of, I have several questions.

Jan11baktegonSticks

I did sticks plural cause I've always had 4 sticks running on my address but my setup was too finicky to change it, clearly. Are we planning on changing the address name with each month...?

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11baktegonSticks

1) Does anyone know how to change the frequency of the sticks once you've started Cgminer? They default to 125 but I'd like to do 200

2) Anyone know why sudo ./cgminer -o stratum+tcp://solo.ckpool.org:3333 -u 1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11baktegonSticks --compac-freq 200 would return a bash cgminer not found error. I can navigate to the folder in my file system on the raspberry pi and start the executable however so i'm not sure what i'm doing wrong...

3) I also think one of my sticks burned out It returns an error about usb lib or something and then goes to status ZOMBIE in cgminer. Any way to check if my stick is working on Windows? Since the pi is finally back up I don't want to mess around with it.

1) I don't think you can change it while cgminer is running.

2) Did you do the cd cgminer-gekko or cd cgminer-gekko-rev2 (if your using the new 1) first?

3) don't know about running in windows.

[philipma1957]

everyone has updated yeah!!!!

@ cryptoglance


 http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.jan11dukebox_1ststick



jan11dukebox_1ststick


we have the   _   bug    please over ride and enter him

[cryptoglance]

everyone has updated yeah!!!!

@ cryptoglance


 http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.jan11dukebox_1ststick



jan11dukebox_1ststick


we have the   _   bug    please over ride and enter him

Fixed the bug so you can now enter users with - or _. I have also added the user.

[philipma1957]

everyone has updated yeah!!!!

@ cryptoglance


 http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.jan11dukebox_1ststick



jan11dukebox_1ststick


we have the   _   bug    please over ride and enter him

Fixed the bug so you can now enter users with - or _. I have also added the user.

Thank you..

So we have done it all cool.

@ herbpean we are not changing titles again.

We are all setup correctly in order  so there is no need to reset the list.

I will do a pdf of the list and then cryptoglance can remove the old names.

[HerbPean]

@ herbpean we are not changing titles again.

Well deserve break !!!

Thanks Phil