[150TH] [PPLNS 0.5%] Jonny's Mining Emporium (bravo-mining.com)

[jonnybravo0311]

Thanks for the update, Phil.  I didn't know NH changed their min diff requirements again.  I have made the necessary changes as you can see in the screenshot:

[nundinal]

  over 25TH w/nicehash working fine now

[jonnybravo0311]

over 25TH w/nicehash working fine now

LOL... you have like 40x 25TH working right now

[philipma1957]

Thanks for the update, Phil.  I didn't know NH changed their min diff requirements again.  I have made the necessary changes as you can see in the screenshot:

thank you I will rent and test

[jonnybravo0311]

Cool.  Let me know if you run into any issues.  The diff on 3334 now starts at 2097151 and varies from 1048575 to 16777215.  I'm updating the first post in the thread to reflect those changes as well.

[philipma1957]

Cool.  Let me know if you run into any issues.  The diff on 3334 now starts at 2097151 and varies from 1048575 to 16777215.  I'm updating the first post in the thread to reflect those changes as well.

so far so good I am pushing over 300 th at the moment.

I moved it from 0.500 to  2.000
I moved it from 2.000 to  4.000
I moved it from 4.000 to  8.000
I moved it from 8.000 to 16.000
I moved it from 16.00 to 32.00
 -- This is all I can do for now   I got to 24.9ph on nicehash and to 20.7 ph on the pool side before the rentals coin was spent

so it looks fixed

[727miner]

Nice to see some more hash pointed this way. We're certainly due for a block!

[surferdudemi]

hint: go to page 1 of this topic

Hi, was this directed to my post, or another one?  It's difficult to tell.  However, the info on page one of this post is over 2 years old and very out of date.  Some of it conflicts with what is currently on the website.

[philipma1957]

hint: go to page 1 of this topic

Hi, was this directed to my post, or another one?  It's difficult to tell.  However, the info on page one of this post is over 2 years old and very out of date.  Some of it conflicts with what is currently on the website.

was not for you it was for the guy with an antminer A3

[philipma1957]

Have not read through all 92 pages, but I did do a search and couldn't find anything on the payout fee in this thread or on Google.  One page on the website, about on-demand payout, says there's an 0.001 BTC fee for the payout.  But then the auto-payout field also seems to say there's an 0.001 BTC payout fee for each one.  The little ? icon doesn't do anything, so there doesn't seem to be any more clarification on this.  Slushpool doesn't have any payout fee, though of course they have a 2% take on the mining.  But 0.5% mining fee plus 0.001 equates to more than 2% if the autopayout is set to 0.05 (~$500).  I don't mind waiting for payouts to reduce the total fees to the pool, but at the same time, I don't want to have to wait a month.  I've currently pointed an S9 at your pool, just to try it out and compare to Slushpool.  Can you provide any more info on the payout fee scheme?

Thanks

This is a good question  we have not hit a block in a long time  I am not sure how jonny will handle payout fees. When we finally hit a block

[jonnybravo0311]

hint: go to page 1 of this topic

Hi, was this directed to my post, or another one?  It's difficult to tell.  However, the info on page one of this post is over 2 years old and very out of date.  Some of it conflicts with what is currently on the website.

I try to keep the first page and the site up to date.  If there are discrepancies, please let me know so I can address them.

Have not read through all 92 pages, but I did do a search and couldn't find anything on the payout fee in this thread or on Google.  One page on the website, about on-demand payout, says there's an 0.001 BTC fee for the payout.  But then the auto-payout field also seems to say there's an 0.001 BTC payout fee for each one.  The little ? icon doesn't do anything, so there doesn't seem to be any more clarification on this.  Slushpool doesn't have any payout fee, though of course they have a 2% take on the mining.  But 0.5% mining fee plus 0.001 equates to more than 2% if the autopayout is set to 0.05 (~$500).  I don't mind waiting for payouts to reduce the total fees to the pool, but at the same time, I don't want to have to wait a month.  I've currently pointed an S9 at your pool, just to try it out and compare to Slushpool.  Can you provide any more info on the payout fee scheme?

Thanks

This is a good question  we have not hit a block in a long time  I am not sure how jonny will handle payout fees. When we finally hit a block

It is a good question, and one that I missed.  The reason I had to change the amount charged per withdrawal was due to the network.  Initially I was charging 0.0001BTC per withdrawal; however, after a couple withdrawal transactions happened, I realized that the fee wasn't even coming close to covering the actual transaction cost.  Therefore, I changed it to 0.001BTC.  Even there it is barely covering costs (most recent withdrawal had a 0.00098BTC transaction fee).  I will adjust the fee based on what the network demands.

Since I send to multiple addresses in a single transaction for auto-payouts, I can turn that value down so that each miner isn't paying the 0.001BTC.  The way it is now punishes miners who are part of a multi-payout transaction.  I appreciate you pointing out the discrepancy and will adjust the auto-payout fees.

Edit: I changed the auto-payout fees to 0.0002BTC.  I will keep my eye on the network and fees in general and will update the pool accordingly.

Now we need to find a block

[funtik121155]

Have not read through all 92 pages, but I did do a search and couldn't find anything on the payout fee in this thread or on Google.  One page on the website, about on-demand payout, says there's an 0.001 BTC fee for the payout.  But then the auto-payout field also seems to say there's an 0.001 BTC payout fee for each one.  The little ? icon doesn't do anything, so there doesn't seem to be any more clarification on this.  Slushpool doesn't have any payout fee, though of course they have a 2% take on the mining.  But 0.5% mining fee plus 0.001 equates to more than 2% if the autopayout is set to 0.05 (~$500).  I don't mind waiting for payouts to reduce the total fees to the pool, but at the same time, I don't want to have to wait a month.  I've currently pointed an S9 at your pool, just to try it out and compare to Slushpool.  Can you provide any more info on the payout fee scheme?

Thanks

This is a good question  we have not hit a block in a long time  I am not sure how jonny will handle payout fees. When we finally hit a block

everything will be OK, what are you worried about?

[Steamtyme]

Thanks for adjusting the auto-payout fee, super reasonable.

It would be nice to see a block, but some here have been waiting way longer than me lol.

[philipma1957]

I am taking  a swing at it again.

[Lexs163]

HI jonnybravo0311
 
What happens to the pool?  are you doing an update?  I do not see workers inside (

[tubexc]

Pool is reporting dead ?!?

[jonnybravo0311]

Pool is reporting dead ?!?

HI jonnybravo0311
 
What happens to the pool?  are you doing an update?  I do not see workers inside (

Sorry about that folks.  Pool didn't restart automatically and I slept through the alarms.  It's all back up and running properly again.  Total downtime was just under 3 hours.

[Steamtyme]

I was hoping maybe we found a block and broke it

[jonnybravo0311]

LOL... now THAT would have been a good way to wake up this morning

[nundinal]

Pool is reporting dead ?!?

HI jonnybravo0311
 
What happens to the pool?  are you doing an update?  I do not see workers inside (

Sorry about that folks.  Pool didn't restart automatically and I slept through the alarms.  It's all back up and running properly again.  Total downtime was just under 3 hours.

Can you check the 3334 proxy?  NiceHash reporting failure to connect with pool test.