Antminer U3 .bat code?

[jphelps]

Ive tried everyone i could find

cgminer.exe --bmsc-options 115200:10 -o xxx -u xxx -p xxx --bmsc-freq 0982

cgminer.exe --bmsc-options 115200:0.65 -o XXX -u XXX -p XXX --bmsc-voltage 0800 --bmsc-freq 1306

even tried to just open cgminer, it keeps saying the pool difficulty changed or something

please help

[1715302615]

1715302615

[notlist3d]

Ive tried everyone i could find

cgminer.exe --bmsc-options 115200:10 -o xxx -u xxx -p xxx --bmsc-freq 0982

cgminer.exe --bmsc-options 115200:0.65 -o XXX -u XXX -p XXX --bmsc-voltage 0800 --bmsc-freq 1306

even tried to just open cgminer, it keeps saying the pool difficulty changed or something

please help

If  you look under devices is the U3 showing up?  I ask this as it could be a driver issue zadig sometimes causes some people trouble.  So I would start with looking for device. After that focus on cgminer.

Long term get a R1 with crazy guy's mod on it.  It will reset your zombies and make your life a lot easier..

[jphelps]

Ive tried everyone i could find

cgminer.exe --bmsc-options 115200:10 -o xxx -u xxx -p xxx --bmsc-freq 0982

cgminer.exe --bmsc-options 115200:0.65 -o XXX -u XXX -p XXX --bmsc-voltage 0800 --bmsc-freq 1306

even tried to just open cgminer, it keeps saying the pool difficulty changed or something

please help

If  you look under devices is the U3 showing up?  I ask this as it could be a driver issue zadig sometimes causes some people trouble.  So I would start with looking for device. After that focus on cgminer.

Long term get a R1 with crazy guy's mod on it.  It will reset your zombies and make your life a lot easier..

yea the driver is fine, but whats an R1?

[VirosaGITS]

Ive tried everyone i could find

cgminer.exe --bmsc-options 115200:10 -o xxx -u xxx -p xxx --bmsc-freq 0982

cgminer.exe --bmsc-options 115200:0.65 -o XXX -u XXX -p XXX --bmsc-voltage 0800 --bmsc-freq 1306

even tried to just open cgminer, it keeps saying the pool difficulty changed or something

please help

If  you look under devices is the U3 showing up?  I ask this as it could be a driver issue zadig sometimes causes some people trouble.  So I would start with looking for device. After that focus on cgminer.

Long term get a R1 with crazy guy's mod on it.  It will reset your zombies and make your life a lot easier..

yea the driver is fine, but whats an R1?

The Antminer R1. Its a router/miner/whatever. Someone put firmware on it that will prevent the U3 from going zombie;
https://www.bitmaintech.com/productDetail.htm?pid=00020160128085902068wLN3nqWQ06C5

[notlist3d]

Ive tried everyone i could find

cgminer.exe --bmsc-options 115200:10 -o xxx -u xxx -p xxx --bmsc-freq 0982

cgminer.exe --bmsc-options 115200:0.65 -o XXX -u XXX -p XXX --bmsc-voltage 0800 --bmsc-freq 1306

even tried to just open cgminer, it keeps saying the pool difficulty changed or something

please help

If  you look under devices is the U3 showing up?  I ask this as it could be a driver issue zadig sometimes causes some people trouble.  So I would start with looking for device. After that focus on cgminer.

Long term get a R1 with crazy guy's mod on it.  It will reset your zombies and make your life a lot easier..

yea the driver is fine, but whats an R1?

The Antminer R1. Its a router/miner/whatever. Someone put firmware on it that will prevent the U3 from going zombie;
https://www.bitmaintech.com/productDetail.htm?pid=00020160128085902068wLN3nqWQ06C5

It's in the R1 thread on the forum.  You will see different versions of Crazy Guy's custom firmware.  But all of them are great, but you might go ahead and get most current.   

On the custom firmware it does not prevent zombies, but it does detect them and restart the device.   It can go as far as restarting the entire R1 which does fix all zombies.   It's a great firmware to run.

[Mikestang]

Follow steps to get proper driver and zadig, make sure your system sees the miner.

Download latest cgminer, 4.9.2: http://ck.kolivas.org/apps/cgminer/

Use U3 codes, e.g. --au3-freq <arg>

Report back success or failure.