[ANN] Terracoin (TRC) - Est 2012

[rototo]

It is hard to troubleshoot on bitcointalk.  Can you join Telegram, Slack or Discord?  Thanks!

Could you send me your Discord link please ?

Thanks in advance

[clockuniverse]

It is hard to troubleshoot on bitcointalk.  Can you join Telegram, Slack or Discord?  Thanks!

Could you send me your Discord link please ?

Thanks in advance

Here you go! https://discord.gg/4MR38t

[sprinkles]

We have been added to another exchange and they are on the correct blockchain!  https://www.nlexch.com/markets/trcbtc

Not checked in for a little while. Are cryptopia not on the right chain?

They are still stuck.  But last night the messaged me and said they reindex, so I opened another support ticket this morning.

OK thanks. Will leave it a day or two then try a test withdrawal.

[crypto-dev]

Hey terracoin team, what you think about implementing POS in TERRACOIN
I can help you with it

[clockuniverse]

Cryptopia is fixed!  C-cex too!

[duyenwong]

Cryptopia is fixed!  C-cex too!

Yes, and the coins I sent out that I was afraid may be lost showed up at Cryptopia just fine.  Awesome, and thanks!

[clockuniverse]

Dec 14th Terracoin Update - Stable - https://medium.com/@clockuniverse/dec-14th-terracoin-update-stable-458dd4cc6236

Please read!

[j4y_naKomodo]

Greetings, friends at Terracoin! As Komodo Platform has been working around the clock to fine-tune the multiple GUI's that are the face of our Agama multiwallet and BarterDEX atomic swap protocols, there have obviously been many bugs found and many debugged. However, one bug in particular was found not only in our Agama GUI wallet, but also in the zcash4mac GUI swing wallet. It is a simple bug, but it warrants your attention. This is a potential money cost bug, and as a Bitcoin-protocol cryptocurrency, your GUI wallet(s) may be susceptible.

watchonly-GUI bug: 'watchonly' addresses appearing as your own in GUI wallet; users could potentially send funds to the address, unaware it is not theirs or available for withdrawal.  You can import <any address> and it becomes a 'watchonly' address. The GUI will display the address as yours, add its funds to your balance, and accept deposits, but cannot be withdrawn. This could be a normal address, my address, a p2sh address, satoshi's address, etc. This can be confusing to an end-user and will lead to many headaches for the developer, as is always the case with misplaced funds.

FOUND: in Komodo Platform's Agama multiwallet (fixed) and zcash4mac GUI swing wallet (@jl777b: "newest QT wallet seems ok about watch only, but not sure of older and when it was fixed")

ex. @grewalsatinder found the bug in his zcash swing wallet: https://i.imgur.com/sVd0QTL.png

"satinder used zcash4mac, ie. the zcash osx GUI, not ours... the assumption is no GUI out there properly handles watch only addresses, until proven that they do... agama also had this bug, which we found and fixed, so it seems a very common bug to have"

SOLUTION: For the 'watchonly' address or any address not yours, the value 'ismine' returns false. Any such address gets filtered out.

QUESTIONS:

• How does your recommended GUI deal with watchonly addresses?
• Does your GUI display watchonly addresses as different than actual addresses in the wallet?

We need to experiment a bit to see which approach gets a better response triggering the bug. People WILL lose money if they send funds to a watchonly address.

"the t3 addresses in the 'Own Addresses' column! and they absolutely cant be as they are p2sh addresses. it is clear proof that the bug is very real and anybody that understands a p2sh address will understand it cant be something in your wallet. it is usually a multisig address, so only if it is a 1of1 multisig (possible but very silly) can you have a p2sh address that is spendable, but the wallet wont even know it... normal addresses can also be watchonly, which makes this even worse. in that case it would appear in the list of addresses just like all the others. even if you are able to spot p2sh addresses visually, it wont be enough"

I've been tasked with spreading awareness and facilitating discussion of this bug, so please let me know if you have any questions. I'll get you some answers and we can minimize the impact. We wanted to reach out directly to the developers of the 60+ coins featured on Agama and BarterDEX as the bug may have a direct impact on you (via your own GUI wallet).

- Jay

[clockuniverse]

Greetings, friends at Terracoin! As Komodo Platform has been working around the clock to fine-tune the multiple GUI's that are the face of our Agama multiwallet and BarterDEX atomic swap protocols, there have obviously been many bugs found and many debugged. However, one bug in particular was found not only in our Agama GUI wallet, but also in the zcash4mac GUI swing wallet. It is a simple bug, but it warrants your attention. This is a potential money cost bug, and as a Bitcoin-protocol cryptocurrency, your GUI wallet(s) may be susceptible.

watchonly-GUI bug: 'watchonly' addresses appearing as your own in GUI wallet; users could potentially send funds to the address, unaware it is not theirs or available for withdrawal.  You can import <any address> and it becomes a 'watchonly' address. The GUI will display the address as yours, add its funds to your balance, and accept deposits, but cannot be withdrawn. This could be a normal address, my address, a p2sh address, satoshi's address, etc. This can be confusing to an end-user and will lead to many headaches for the developer, as is always the case with misplaced funds.

FOUND: in Komodo Platform's Agama multiwallet (fixed) and zcash4mac GUI swing wallet (@jl777b: "newest QT wallet seems ok about watch only, but not sure of older and when it was fixed")

ex. @grewalsatinder found the bug in his zcash swing wallet:

"satinder used zcash4mac, ie. the zcash osx GUI, not ours... the assumption is no GUI out there properly handles watch only addresses, until proven that they do... agama also had this bug, which we found and fixed, so it seems a very common bug to have"

SOLUTION: For the 'watchonly' address or any address not yours, the value 'ismine' returns false. Any such address gets filtered out.

QUESTIONS:

• How does your recommended GUI deal with watchonly addresses?
• Does your GUI display watchonly addresses as different than actual addresses in the wallet?

We need to experiment a bit to see which approach gets a better response triggering the bug. People WILL lose money if they send funds to a watchonly address.

"the t3 addresses in the 'Own Addresses' column! and they absolutely cant be as they are p2sh addresses. it is clear proof that the bug is very real and anybody that understands a p2sh address will understand it cant be something in your wallet. it is usually a multisig address, so only if it is a 1of1 multisig (possible but very silly) can you have a p2sh address that is spendable, but the wallet wont even know it... normal addresses can also be watchonly, which makes this even worse. in that case it would appear in the list of addresses just like all the others. even if you are able to spot p2sh addresses visually, it wont be enough"

I've been tasked with spreading awareness and facilitating discussion of this bug, so please let me know if you have any questions. I'll get you some answers and we can minimize the impact. We wanted to reach out directly to the developers of the 60+ coins featured on Agama and BarterDEX as the bug may have a direct impact on you (via your own GUI wallet).

- Jay

Our wallet has a watch only area, and it also has a symbol showing that the address is watch only on the main page, BUT in the receiving addresses it doesn't differentiate between an address that is owned and one that is watch only.  I can see how that could be confusing and could end up causing people to send money to the address they are watching instead of to their local wallet.  On the wallet were I have a watch only addresses I just changed the label to watch only.

Thanks for the heads up.  I will pass this on to our devs.

[bitcoinexplorer]

I have been watching your coin for long, is it dying now?

I noticed for last few days its value in BTC is going down and down......

Is it getting dumped?

[clockuniverse]

I have been watching your coin for long, is it dying now?

I noticed for last few days its value in BTC is going down and down......

Is it getting dumped?

We had some network issues that we recently resolved so the dump that other altcoins felt last week we are feeling now.  You should check out the weekly update I posted last night.  Every weekly update that I post explains what is going on and it also explains our plans for the future (atomic swap, multialgo).

Right now is a good time to buy the dip because now that we have added another dev the future is even brighter for Terracoin.

[bitcoinexplorer]

I have been watching your coin for long, is it dying now?

I noticed for last few days its value in BTC is going down and down......

Is it getting dumped?

We had some network issues that we recently resolved so the dump that other altcoins felt last week we are feeling now.  You should check out the weekly update I posted last night.  Every weekly update that I post explains what is going on and it also explains our plans for the future (atomic swap, multialgo).

Right now is a good time to buy the dip because now that we have added another dev the future is even brighter for Terracoin.

Thats good, can you tell me how to setup PoW Masternode , thanks

[helipotte]

sentinel for windows?  Can't get the wallet to compile in Mint mate.

[clockuniverse]

sentinel for windows?  Can't get the wallet to compile in Mint mate.

I compiled those binaries on Mint, so they should compile no problem.  What issue are you having?

I have a windows sentinel exe, but it has only been tested by one person so far.  Give this a try: https://github.com/clockuniverse/WINsen

[bitcoinexplorer]

sentinel for windows?  Can't get the wallet to compile in Mint mate.

I compiled those binaries on Mint, so they should compile no problem.  What issue are you having?

I have a windows sentinel exe, but it has only been tested by one person so far.  Give this a try: https://github.com/clockuniverse/WINsen

Please provide manual for setting up TRC PoW Masternode on VPS, thanks

[helipotte]

sentinel for windows?  Can't get the wallet to compile in Mint mate.

I compiled those binaries on Mint, so they should compile no problem.  What issue are you having?

I have a windows sentinel exe, but it has only been tested by one person so far.  Give this a try: https://github.com/clockuniverse/WINsen

Many thanks! I will give that a try.

[j4y_naKomodo]

Greetings, friends at Terracoin! As Komodo Platform has been working around the clock to fine-tune the multiple GUI's that are the face of our Agama multiwallet and BarterDEX atomic swap protocols, there have obviously been many bugs found and many debugged. However, one bug in particular was found not only in our Agama GUI wallet, but also in the zcash4mac GUI swing wallet. It is a simple bug, but it warrants your attention. This is a potential money cost bug, and as a Bitcoin-protocol cryptocurrency, your GUI wallet(s) may be susceptible.

watchonly-GUI bug: 'watchonly' addresses appearing as your own in GUI wallet; users could potentially send funds to the address, unaware it is not theirs or available for withdrawal.  You can import <any address> and it becomes a 'watchonly' address. The GUI will display the address as yours, add its funds to your balance, and accept deposits, but cannot be withdrawn. This could be a normal address, my address, a p2sh address, satoshi's address, etc. This can be confusing to an end-user and will lead to many headaches for the developer, as is always the case with misplaced funds.

FOUND: in Komodo Platform's Agama multiwallet (fixed) and zcash4mac GUI swing wallet (@jl777b: "newest QT wallet seems ok about watch only, but not sure of older and when it was fixed")

ex. @grewalsatinder found the bug in his zcash swing wallet: https://i.imgur.com/sVd0QTL.png

"satinder used zcash4mac, ie. the zcash osx GUI, not ours... the assumption is no GUI out there properly handles watch only addresses, until proven that they do... agama also had this bug, which we found and fixed, so it seems a very common bug to have"

SOLUTION: For the 'watchonly' address or any address not yours, the value 'ismine' returns false. Any such address gets filtered out.

QUESTIONS:

• How does your recommended GUI deal with watchonly addresses?
• Does your GUI display watchonly addresses as different than actual addresses in the wallet?

We need to experiment a bit to see which approach gets a better response triggering the bug. People WILL lose money if they send funds to a watchonly address.

"the t3 addresses in the 'Own Addresses' column! and they absolutely cant be as they are p2sh addresses. it is clear proof that the bug is very real and anybody that understands a p2sh address will understand it cant be something in your wallet. it is usually a multisig address, so only if it is a 1of1 multisig (possible but very silly) can you have a p2sh address that is spendable, but the wallet wont even know it... normal addresses can also be watchonly, which makes this even worse. in that case it would appear in the list of addresses just like all the others. even if you are able to spot p2sh addresses visually, it wont be enough"

I've been tasked with spreading awareness and facilitating discussion of this bug, so please let me know if you have any questions. I'll get you some answers and we can minimize the impact. We wanted to reach out directly to the developers of the 60+ coins featured on Agama and BarterDEX as the bug may have a direct impact on you (via your own GUI wallet).

- Jay

Our wallet has a watch only area, and it also has a symbol showing that the address is watch only on the main page, BUT in the receiving addresses it doesn't differentiate between an address that is owned and one that is watch only.  I can see how that could be confusing and could end up causing people to send money to the address they are watching instead of to their local wallet.  On the wallet were I have a watch only addresses I just changed the label to watch only.

Thanks for the heads up.  I will pass this on to our devs.

Excellent, thank you! Good to know it is labeled.

[Romanoff123]

Hello Together,

My wallet does not sync, although I have 8 active connections.
 
I have the message: "Keine Blockquelle verfügbar..." / No block source available...

Installed wallet version: I have installed wallet version Terracoin Core Version v0.12.1.5-59a32ff38 (64-Bit)


=> What do I need to do to sync the wallet ?


It seems that in this situation, I can do transactions, but I do not get any confirmations.
I am speaking of transaction: a5ed3f56ae19159de0ad0fed83adc548a12a4d4664656ba3db0231112865b048-000

I have these addnodes in the conf file:
addnode=62.138.3.214:13333
addnode=23.152.0.149:13333
addnode=108.61.10.90:13333
addnode=82.200.205.30:13333
addnode=93.113.101.229:13333
addnode=104.236.121.253:13333
addnode=174.138.70.25:13333
addnode=104.236.3.148:13333
addnode=128.199.224.200:13333
addnode=139.59.99.149:13333
addnode=188.166.221.218:13333
addnode=45.77.209.226:13333
addnode=138.197.88.13:13333
addnode=104.131.114.235:13333
addnode=45.32.222.157:13333

[clockuniverse]

Hello Together,

My wallet does not sync, although I have 8 active connections.
 
I have the message: "Keine Blockquelle verfügbar..." / No block source available...

Installed wallet version: I have installed wallet version Terracoin Core Version v0.12.1.5-59a32ff38 (64-Bit)


=> What do I need to do to sync the wallet ?


It seems that in this situation, I can do transactions, but I do not get any confirmations.
I am speaking of transaction: a5ed3f56ae19159de0ad0fed83adc548a12a4d4664656ba3db0231112865b048-000

I have these addnodes in the conf file:
addnode=62.138.3.214:13333
addnode=23.152.0.149:13333
addnode=108.61.10.90:13333
addnode=82.200.205.30:13333
addnode=93.113.101.229:13333
addnode=104.236.121.253:13333
addnode=174.138.70.25:13333
addnode=104.236.3.148:13333
addnode=128.199.224.200:13333
addnode=139.59.99.149:13333
addnode=188.166.221.218:13333
addnode=45.77.209.226:13333
addnode=138.197.88.13:13333
addnode=104.131.114.235:13333
addnode=45.32.222.157:13333

We figured this out on Telegram, but I thought I would post a reply here.  If your wallet is stuck on a block then you will need to reindex, and then the transactions should show confirmations.  Hope that helps other people out!

[Romanoff123]

Hello Together,

My wallet does not sync, although I have 8 active connections.
 
I have the message: "Keine Blockquelle verfügbar..." / No block source available...

Installed wallet version: I have installed wallet version Terracoin Core Version v0.12.1.5-59a32ff38 (64-Bit)


=> What do I need to do to sync the wallet ?


It seems that in this situation, I can do transactions, but I do not get any confirmations.
I am speaking of transaction: a5ed3f56ae19159de0ad0fed83adc548a12a4d4664656ba3db0231112865b048-000

I have these addnodes in the conf file:
addnode=62.138.3.214:13333
addnode=23.152.0.149:13333
addnode=108.61.10.90:13333
addnode=82.200.205.30:13333
addnode=93.113.101.229:13333
addnode=104.236.121.253:13333
addnode=174.138.70.25:13333
addnode=104.236.3.148:13333
addnode=128.199.224.200:13333
addnode=139.59.99.149:13333
addnode=188.166.221.218:13333
addnode=45.77.209.226:13333
addnode=138.197.88.13:13333
addnode=104.131.114.235:13333
addnode=45.32.222.157:13333

Issue is solved.
I got a very good support directly from the telegram chat.
The dev there took care on my issue and gave me online support.

My problem could be solved with a index rebuild in the wallet.


I very much appreciated this excellent & quick support via telegram chat!