√ √ Kiklo's Premium Blockchain Snapshot Service √ √

[kiklo]

Today zeitcoind getinfo tells me that it has indexed 1500 Blocks. This seems to me a neverending Story.
I stopped it and start it new with bootstrap.dat .
By watching the content of debug.log it seems to be  a slow but continous process. I will try this.

The System ist a Rapsberry PI 3 with 1GB Ram.

ZEIT by itself will use a little over ~1GB of ram, if the system does not have at least 2 GB, it is probably going to be more trouble than success.
(System is probably Page Thrashing (http://www.geekinterview.com/question_details/3333) )


 

[crysx]

nice kiklo ...

ill continue following this thread now mate ...

#crysx

[RJF19]

Hello, is the Snapshot usable with zeitcoind ? (The Commandline Version)
I tried it, but after 1 Day it seems to be stuck at 500 Blocks

Hmm,
Should be , check back in ~24 hours , and I will have an updated ZEIT snapshot to today's date.
If that updated snapshot fails, you could use the updated bootstrap instead.
(How much ram is in your system?)

 

FYI:

ZEIT Blockchain Snapshot Updated to 2016-9-04

ZEIT SNAPSHOT


 

Would you be willing to add BitBay (BAY) to the list?

[kiklo]

Would you be willing to add BitBay (BAY) to the list?

Sure,  

Just started Syncing from Scratch, will post Snapshot & Bootstrap links in a few day.

Later,
Kiklo

[kiklo]

BitBay snapshot removed New wallet release breaks the Snapshot.

BITBAY BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 1.0.0.1-g  used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      BitBayBlockChainSnapShot-(Date Created).rar
Download :    N/A

NEW Wallet: Install Instructions
Make a BitBay folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from BitBayBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\BitBay
Then open BitBay and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure BitBay is closed
Go under c:\Users\"username"\AppData\Roaming\BitBay (for Windows) or in the BitBay data folder for other OSes
Then Delete 4  files :  .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from BitBayBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\BitBay
Then open BitBay and it will start syncing the BlockChain from the last snapshot.

Once your BitBay Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run BitBay-qt.exe -rescan  
will take a little while but should correct your balance info.

List of AddNodes
https://chainz.cryptoid.info/bay/#!network

Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

[disco987]

If possible to add CloakCoin (CLOAK) to the list?
 
http://cloakcoin.com/

Regards

[kiklo]

If possible to add CloakCoin (CLOAK) to the list?
 
http://cloakcoin.com/

Regards

Sure it will be a ~week or so,
Hyper           √
Einsteinium  √
Cloakcoin    √

 

[kiklo]

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 



EINSTEINIUM BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 0.9.0.0-unk-beta used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      EinsteiniumBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a Einsteinium folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from EinsteiniumBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Einsteinium
Then open Einsteinium and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Einsteinium is closed
Go under c:\Users\"username"\AppData\Roaming\Einsteinium (for Windows) or in the Einsteinium data folder for other OSes
Then Delete 3  files :  .lock & db.log & debug.log
Then Delete 2 folders named : blocks & chainstate
Then Extract and copy the files from EinsteiniumBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Einsteinium
Then open Einsteinium and it will start syncing the BlockChain from the last snapshot.

Once your Einsteinium Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Einsteinium-qt.exe -rescan  
will take a little while but should correct your balance info.


Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

[kiklo]

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 


CLOAKCOIN BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 1.9.7.56  used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      CloakcoinBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a CloakCoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from CloakcoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\CloakCoin
Then open Cloakcoin and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Cloakcoin is closed
Go under c:\Users\"username"\AppData\Roaming\CloakCoin (for Windows) or in the Cloakcoin data folder for other OSes
Then Delete 5  files :  .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 1 folder named : database
Then Extract and copy the files from CloakcoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\CloakCoin
Then open Cloakcoin and it will start syncing the BlockChain from the last snapshot.

Once your Cloakcoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Cloakcoin-qt.exe -rescan  
will take a little while but should correct your balance info.


Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

[revelacaogr]

Thanks Kiklo!!
much appreciated!

[Fishmaster42]

Thanks again for this service just used it to reload the noble coin wallet. Thanks for your hard work. Fish

[kiklo]

Status Update for the Blockchain Service

Services for BlockChain SnapShots
Coins using the Paid Service
Direct Link to Snapshot download
Exact Date created included in the Snapshot Post
SHA-256 Hash Generated so you can verify the File download matches the original created file.
Snapshot & BootStrap Updated every 2 weeks
Current Price is 250 thousand ZEIT per month per coin to add these options.
(Only ZEIT Accepted)

ZEIT can be purchased at any of the following exchanges.
@ alcurex & CoinXchange & Cryptopia & Nova Exchange & SouthXchange

All coins that are using only the free service, snapshots will be updated every ~5 months.


 

[HCLivess]

Thanks for this idea, I have implemented it to Bismuth explorer core

[Vin]

@Kiklo
I have seen your post in the Bitbean thread.

Great idea and service.

Thank you!

[kiklo]

@Dev,

Your Latest Wallet Release Breaks My Snapshot for your coin.
It automatically loads your Bootstrap.dat and starts overwriting the snapshot, making it useless for your coin.

Unless there is a switch to disable your bootstrap from auto loading or a download without the autoloading bootstrap,
There will be no point to me offering a snapshot for your coin as it will no longer work.

Let me know.

Thanks.
 

Left the above message, bitbay dev has not contact me, deleting Bitbay Snapshot as it was broken by their bootstrap.dat being included in the wallet download.

[bitmaster1x]

Nice work with the snapshots.

[kk777]

Please correct the link of "List of AddNodes" of Sprouts.
https://www.cryptopia.co.nz/BlockExplorer?coin=SPRTS

I know these links:
https://www.coinexchange.io/network/peers/SPRTS
https://chainz.cryptoid.info/sprts/#!network

[kiklo]

Please correct the link of "List of AddNodes" of Sprouts.
https://www.cryptopia.co.nz/BlockExplorer?coin=SPRTS

I know these links:
https://www.coinexchange.io/network/peers/SPRTS
https://chainz.cryptoid.info/sprts/#!network

Done   


 

[Jumanji7]

Can you tell me how much time I will need to sync my blackcoin wallet with a SnapShot?

[kiklo]

Can you tell me how much time I will need to sync my blackcoin wallet with a SnapShot?

Last Blackcoin snapshot was 4 months ago, so it would probably take ~8 to 12 hours to sync after installing it.

However since you asked about it, I am syncing it now, and will update this post , when the snapshot is at today's date,
It will take less than 1 hour to sync with that one, if you can wait.
Will Post here when the snapshot is updated.