borris123
|
|
March 24, 2016, 08:12:48 AM |
|
1.0.2.0 fix is on now to update the one on your server.
|
|
|
|
pjcltd (OP)
Legendary
Offline
Activity: 1778
Merit: 1003
NodeMasters
|
|
March 24, 2016, 10:01:24 AM |
|
1.0.2.0 fix is on now to update the one on your server.
i have built the fix i was going to wait till they release the windows wallet thanks Paul
|
|
|
|
pjcltd (OP)
Legendary
Offline
Activity: 1778
Merit: 1003
NodeMasters
|
|
March 24, 2016, 10:16:52 AM |
|
Hi ok to update your VPS that is hosted at MP-Hosting THIS WILL ONLY WORK ON MP-HOSTING SERVERS
THIS WILL UPGRADE YOUR DARKNET TO 1.0.2.1
do the foloowing 1 log onto your VPS First we need to delete the old update scrypt then type wget http://164.132.143.5/1.0.2.1/darknet-update.sh you will see this on screen Connecting to 164.132.143.5:80... connected. HTTP request sent, awaiting response... 200 OK Length: 514 [text/x-sh] Saving to: 'darknet-update.sh'
100%[======================================>] 514 --.-K/s in 0s
2016-03-17 09:54:31 (131 MB/s) - 'darknet-update.sh' saved [514/514]
next type this you will see Stopping darknet DarkNet server stopping Removing old Version Downloading new version --2016-03-17 09:54:42-- http://0.0.0.0/darknet-cliConnecting to 164.132.143.5:80... connected. HTTP request sent, awaiting response... 200 OK Length: 608904 (595K) Saving to: 'darknet-cli' 100%[======================================>] 608,904 --.-K/s in 0.003s 2016-03-17 09:54:42 (201 MB/s) - 'darknet-cli' saved [608904/608904] --2016-03-17 09:54:42-- http://0.0.0.0/darknet-txConnecting to 164.132.143.5:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1175968 (1.1M) Saving to: 'darknet-tx' 100%[======================================>] 1,175,968 --.-K/s in 0.006s 2016-03-17 09:54:42 (195 MB/s) - 'darknet-tx' saved [1175968/1175968] --2016-03-17 09:54:42-- http://0.0.0.0/darknetdConnecting to 164.132.143.5:80... connected. HTTP request sent, awaiting response... 200 OK Length: 5805536 (5.5M) Saving to: 'darknetd' 100%[======================================>] 5,805,536 --.-K/s in 0.03s 2016-03-17 09:54:42 (214 MB/s) - 'darknetd' saved [5805536/5805536] setting permissions Starting Darket damon DarkNet server starting Starting Masternode { "version" : 1000201, "protocolversion" : 70106, "walletversion" : 61000, "balance" : 0.00000000, "obfuscate_balance" : 0.00000000, "blocks" : 73179, "timeoffset" : 0, "connections" : 1, "proxy" : "", "difficulty" : 68.45000775, "testnet" : false, "keypoololdest" : 1457354235, "keypoolsize" : 1001, "paytxfee" : 0.00000000, "relayfee" : 0.00010000, "errors" : "" } Not capable masternode: Hot node, waiting for remote activation. { } Upodate now Done You will now need to go to your controller wallet and start the masternodes any problems let me know thanks Paul
|
|
|
|
borris123
|
|
March 24, 2016, 10:24:41 AM |
|
Hi ok to update your VPS that is hosted at MP-Hosting THIS WILL ONLY WORK ON MP-HOSTING SERVERS
THIS WILL UPGRADE YOUR DARKNET TO 1.0.2.1
do the foloowing 1 log onto your VPS First we need to delete the old update scrypt then type wget http://164.132.143.5/1.0.2.1/darknet-update.sh you will see this on screen Connecting to 164.132.143.5:80... connected. HTTP request sent, awaiting response... 200 OK Length: 514 [text/x-sh] Saving to: 'darknet-update.sh'
100%[======================================>] 514 --.-K/s in 0s
2016-03-17 09:54:31 (131 MB/s) - 'darknet-update.sh' saved [514/514]
next type this you will see Stopping darknet DarkNet server stopping Removing old Version Downloading new version --2016-03-17 09:54:42-- http://0.0.0.0/darknet-cliConnecting to 164.132.143.5:80... connected. HTTP request sent, awaiting response... 200 OK Length: 608904 (595K) Saving to: 'darknet-cli' 100%[======================================>] 608,904 --.-K/s in 0.003s 2016-03-17 09:54:42 (201 MB/s) - 'darknet-cli' saved [608904/608904] --2016-03-17 09:54:42-- http://0.0.0.0/darknet-txConnecting to 164.132.143.5:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1175968 (1.1M) Saving to: 'darknet-tx' 100%[======================================>] 1,175,968 --.-K/s in 0.006s 2016-03-17 09:54:42 (195 MB/s) - 'darknet-tx' saved [1175968/1175968] --2016-03-17 09:54:42-- http://0.0.0.0/darknetdConnecting to 164.132.143.5:80... connected. HTTP request sent, awaiting response... 200 OK Length: 5805536 (5.5M) Saving to: 'darknetd' 100%[======================================>] 5,805,536 --.-K/s in 0.03s 2016-03-17 09:54:42 (214 MB/s) - 'darknetd' saved [5805536/5805536] setting permissions Starting Darket damon DarkNet server starting Starting Masternode { "version" : 1000201, "protocolversion" : 70106, "walletversion" : 61000, "balance" : 0.00000000, "obfuscate_balance" : 0.00000000, "blocks" : 73179, "timeoffset" : 0, "connections" : 1, "proxy" : "", "difficulty" : 68.45000775, "testnet" : false, "keypoololdest" : 1457354235, "keypoolsize" : 1001, "paytxfee" : 0.00000000, "relayfee" : 0.00010000, "errors" : "" } Not capable masternode: Hot node, waiting for remote activation. { } Upodate now Done You will now need to go to your controller wallet and start the masternodes any problems let me know thanks Paul can you confirm that this solves the problem of syncing and getting stuck on blocks?
|
|
|
|
pjcltd (OP)
Legendary
Offline
Activity: 1778
Merit: 1003
NodeMasters
|
|
March 24, 2016, 10:30:19 AM |
|
Hi ok to update your VPS that is hosted at MP-Hosting THIS WILL ONLY WORK ON MP-HOSTING SERVERS
THIS WILL UPGRADE YOUR DARKNET TO 1.0.2.1
do the foloowing 1 log onto your VPS First we need to delete the old update scrypt then type wget http://164.132.143.5/1.0.2.1/darknet-update.sh you will see this on screen Connecting to 164.132.143.5:80... connected. HTTP request sent, awaiting response... 200 OK Length: 514 [text/x-sh] Saving to: 'darknet-update.sh'
100%[======================================>] 514 --.-K/s in 0s
2016-03-17 09:54:31 (131 MB/s) - 'darknet-update.sh' saved [514/514]
next type this you will see Stopping darknet DarkNet server stopping Removing old Version Downloading new version --2016-03-17 09:54:42-- http://0.0.0.0/darknet-cliConnecting to 164.132.143.5:80... connected. HTTP request sent, awaiting response... 200 OK Length: 608904 (595K) Saving to: 'darknet-cli' 100%[======================================>] 608,904 --.-K/s in 0.003s 2016-03-17 09:54:42 (201 MB/s) - 'darknet-cli' saved [608904/608904] --2016-03-17 09:54:42-- http://0.0.0.0/darknet-txConnecting to 164.132.143.5:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1175968 (1.1M) Saving to: 'darknet-tx' 100%[======================================>] 1,175,968 --.-K/s in 0.006s 2016-03-17 09:54:42 (195 MB/s) - 'darknet-tx' saved [1175968/1175968] --2016-03-17 09:54:42-- http://0.0.0.0/darknetdConnecting to 164.132.143.5:80... connected. HTTP request sent, awaiting response... 200 OK Length: 5805536 (5.5M) Saving to: 'darknetd' 100%[======================================>] 5,805,536 --.-K/s in 0.03s 2016-03-17 09:54:42 (214 MB/s) - 'darknetd' saved [5805536/5805536] setting permissions Starting Darket damon DarkNet server starting Starting Masternode { "version" : 1000201, "protocolversion" : 70106, "walletversion" : 61000, "balance" : 0.00000000, "obfuscate_balance" : 0.00000000, "blocks" : 73179, "timeoffset" : 0, "connections" : 1, "proxy" : "", "difficulty" : 68.45000775, "testnet" : false, "keypoololdest" : 1457354235, "keypoolsize" : 1001, "paytxfee" : 0.00000000, "relayfee" : 0.00010000, "errors" : "" } Not capable masternode: Hot node, waiting for remote activation. { } Upodate now Done You will now need to go to your controller wallet and start the masternodes any problems let me know thanks Paul can you confirm that this solves the problem of syncing and getting stuck on blocks? This is not my coin and im not the Dev im only offering this as a update for MP-Hosting customers i hope this will fix the issue thanks Paul
|
|
|
|
jakiman
Legendary
Offline
Activity: 1638
Merit: 1011
jakiman is back!
|
|
March 24, 2016, 02:04:02 PM |
|
Hi Paul, the upgrade/downgrade script you created is definitely beyond scope of your service but is greatly appreciated. I really am glad that I'm running my masternodes on your excellent hosting. Thank you so much!
|
|
|
|
pjcltd (OP)
Legendary
Offline
Activity: 1778
Merit: 1003
NodeMasters
|
|
March 24, 2016, 02:06:13 PM |
|
Hi Paul, the upgrade/downgrade script you created is definitely beyond scope of your service but is greatly appreciated. I really am glad that I'm running my masternodes on your excellent hosting. Thank you so much!
thanks for that its nice to get feedback. I will keep on doing the scrypts as they are needed thanks Paul
|
|
|
|
borris123
|
|
March 24, 2016, 02:13:17 PM |
|
Hi Paul, the upgrade/downgrade script you created is definitely beyond scope of your service but is greatly appreciated. I really am glad that I'm running my masternodes on your excellent hosting. Thank you so much!
ye agree spot on service
|
|
|
|
borris123
|
|
March 25, 2016, 02:19:25 AM |
|
when updating to latest version to get it working correctly you have to restart the server. it says unable to connect to server after the run through of the setup, darknet probably running.
|
|
|
|
pjcltd (OP)
Legendary
Offline
Activity: 1778
Merit: 1003
NodeMasters
|
|
March 25, 2016, 07:29:59 AM |
|
when updating to latest version to get it working correctly you have to restart the server. it says unable to connect to server after the run through of the setup, darknet probably running.
Hi witch VPS / node are you looking at ? thanks Paul
|
|
|
|
jakiman
Legendary
Offline
Activity: 1638
Merit: 1011
jakiman is back!
|
|
March 25, 2016, 02:58:51 PM |
|
when updating to latest version to get it working correctly you have to restart the server. it says unable to connect to server after the run through of the setup, darknet probably running.
Why do you have to restart the server? I didn't and it's working fine without sync issues on 1.0.2.1 via Paul's upgrade script.
|
|
|
|
borris123
|
|
March 25, 2016, 03:22:34 PM |
|
when updating to latest version to get it working correctly you have to restart the server. it says unable to connect to server after the run through of the setup, darknet probably running.
Why do you have to restart the server? I didn't and it's working fine without sync issues on 1.0.2.1 via Paul's upgrade script. Must of just had a funny few it worked find with others this morning
|
|
|
|
cevirmen
Member
Offline
Activity: 85
Merit: 10
|
|
March 29, 2016, 04:08:59 PM |
|
when updating to latest version to get it working correctly you have to restart the server. it says unable to connect to server after the run through of the setup, darknet probably running.
Why do you have to restart the server? I didn't and it's working fine without sync issues on 1.0.2.1 via Paul's upgrade script. Must of just had a funny few it worked find with others this morning Yes I'd the same problem on some nodes too, restarting solved the problem. Still 3 of my nodes goes missing, I keep restarting them.
|
|
|
|
pjcltd (OP)
Legendary
Offline
Activity: 1778
Merit: 1003
NodeMasters
|
|
March 29, 2016, 05:05:26 PM |
|
when updating to latest version to get it working correctly you have to restart the server. it says unable to connect to server after the run through of the setup, darknet probably running.
Why do you have to restart the server? I didn't and it's working fine without sync issues on 1.0.2.1 via Paul's upgrade script. Must of just had a funny few it worked find with others this morning Yes I'd the same problem on some nodes too, restarting solved the problem. Still 3 of my nodes goes missing, I keep restarting them. ok best thing to do is make sure you are on the latest version 1.0.2.0.1 stop darknet by typing ./darknet-cli stop then delete everything in the .darknet folder apart from darknet.conf masternode.conf wallet.dat then start the damon and let it sync up before you start the masternode. that has worked on a masternode that i was having issues thanks Paul
|
|
|
|
cevirmen
Member
Offline
Activity: 85
Merit: 10
|
|
March 30, 2016, 12:23:19 PM |
|
Thanks Paul It worked for the 3 missing nodes.
|
|
|
|
pjcltd (OP)
Legendary
Offline
Activity: 1778
Merit: 1003
NodeMasters
|
|
March 30, 2016, 12:44:13 PM |
|
Thanks Paul It worked for the 3 missing nodes. Cool glad i could help you out thanks Paul
|
|
|
|
borris123
|
|
April 09, 2016, 02:55:12 PM |
|
what happened to all the start and stop buttons on the website?
how do you restart the server if not?
please add them back cus i run into problems. Like just i started new one added the details in which need to be changed then type ./darknetd then get
root@darknet:~# Error: Cannot obtain a lock on data directory /root/.darknet. DarkNet Core is probably already running. ./darknet-cli stop error: couldn't connect to server
so it not even running. A simple restart solves the problem tho. Like the webaccess to doing this so i can leave it stopped until i have the coins ready or the next one.
sudo reboot did the same tho but in root console
|
|
|
|
pjcltd (OP)
Legendary
Offline
Activity: 1778
Merit: 1003
NodeMasters
|
|
April 09, 2016, 03:34:46 PM |
|
what happened to all the start and stop buttons on the website?
how do you restart the server if not?
please add them back cus i run into problems. Like just i started new one added the details in which need to be changed then type ./darknetd then get
root@darknet:~# Error: Cannot obtain a lock on data directory /root/.darknet. DarkNet Core is probably already running. ./darknet-cli stop error: couldn't connect to server
so it not even running. A simple restart solves the problem tho. Like the webaccess to doing this so i can leave it stopped until i have the coins ready or the next one.
sudo reboot did the same tho but in root console
well thats what i get for updating the system LOL ok i will look at what missing thanks Paul
|
|
|
|
jakiman
Legendary
Offline
Activity: 1638
Merit: 1011
jakiman is back!
|
|
April 11, 2016, 01:15:03 PM Last edit: May 23, 2016, 09:26:12 PM by jakiman |
|
Seems the new v1.0.2.1 masternode image has the darknetd already running from get go. Easiest way is to do following once you login to the new masternode VPS for the first time: (note that this assumes you have a separate controller wallet where you secured 10K DNET) 0. Check if wallet is already running & what version (e.g. "version" : 1010001 = 1.1.0.1) ./darknet-cli getinfo 1. Stop darknet (if above command worked & showed a version) ./darknet-cli stop 2. Edit masternode.conf file via command nano /root/.darknet/darknet.conf 3. Add/change following lines only: masternode=1 masternodeprivkey=<yourkey_from_controller_wallet_after_running_masternode_genkey> rpcuser=<randomusername> rpcpassword=<randonpassword> 4a. Now if wallet version is NOT 1.1.0.1 or you are not sure, run the upgrade script as per below: (if not, skip to next step 4b) cd wget http://164.132.143.5/1.1.0.1/darknet-update.shsh ./darknet-update.sh - this will upgrade your wallet then start the wallet/masternode for you. 4b. Start darknet (no need if you used upgrade script above) ./darknetd 5. Wait until blocks sync up to latest block: ./darknet-cli getinfo 6. Check status of your masternode. ./darknet-cli masternode status - Status should say "Not capable masternode: Hot node, waiting for remote activation." This is expected and normal. 7. Start the matching masternode alias from your controller wallet's debug CLI: masternode start-alias <alias> 8. Check status of your masternode. ./darknet-cli masternode status - If your txid and pubkey shows up and says "status" : "Masternode successfully started", it's all done! - Now just wait 24 to 48 hours for your first MN payment!
|
|
|
|
pjcltd (OP)
Legendary
Offline
Activity: 1778
Merit: 1003
NodeMasters
|
|
April 11, 2016, 08:50:55 PM |
|
what happened to all the start and stop buttons on the website?
how do you restart the server if not?
please add them back cus i run into problems. Like just i started new one added the details in which need to be changed then type ./darknetd then get
root@darknet:~# Error: Cannot obtain a lock on data directory /root/.darknet. DarkNet Core is probably already running. ./darknet-cli stop error: couldn't connect to server
so it not even running. A simple restart solves the problem tho. Like the webaccess to doing this so i can leave it stopped until i have the coins ready or the next one.
sudo reboot did the same tho but in root console
well thats what i get for updating the system LOL ok i will look at what missing thanks Paul Hi ok i fixed it now you can start / stop Etc thanks Paul
|
|
|
|
|