Darknet DNET Masternode VPS support MP-Hosting now taking DNET as payment.

[berron]

Hi Paul,

I know there is some problems with the POS transition. Two of my MN seems to be stucked at block 259200 but shows no errors, but the third one show this message

   "version" : 2000000,
    "protocolversion" : 70200,
    "walletversion" : 61000,
    "balance" : 0.00000000,
    "obfuscation_balance" : 0.00000000,
    "blocks" : 259200,
    "timeoffset" : 6,
    "connections" : 40,
    "proxy" : "",
    "difficulty" : 48.59999131,
    "testnet" : false,
    "keypoololdest" : 1460397145,
    "keypoolsize" : 1001,
    "paytxfee" : 0.00000000,
    "relayfee" : 0.00010000,
    "staking status" : "Staking Not Active",
    "errors" : "Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade."

Is there something we can do to solve this? Reinstall the update or something?

Thanks

[1714719167]

1714719167

[1714719167]

1714719167

[1714719167]

1714719167

[pjcltd]

Hi Paul,

I know there is some problems with the POS transition. Two of my MN seems to be stucked at block 259200 but shows no errors, but the third one show this message

   "version" : 2000000,
    "protocolversion" : 70200,
    "walletversion" : 61000,
    "balance" : 0.00000000,
    "obfuscation_balance" : 0.00000000,
    "blocks" : 259200,
    "timeoffset" : 6,
    "connections" : 40,
    "proxy" : "",
    "difficulty" : 48.59999131,
    "testnet" : false,
    "keypoololdest" : 1460397145,
    "keypoolsize" : 1001,
    "paytxfee" : 0.00000000,
    "relayfee" : 0.00010000,
    "staking status" : "Staking Not Active",
    "errors" : "Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade."

Is there something we can do to solve this? Reinstall the update or something?

Thanks

HI
its not our systems thats the issue it the coin
they guys are working on a solution and im sure they will update it soon


thanks
Paul

[pjcltd]

hey can you look at ticket #990726 again.

cheers

Hi
done for you
let me know if you have any more issues

thanks
Paul

[berron]

Hi Paul,

I know there is some problems with the POS transition. Two of my MN seems to be stucked at block 259200 but shows no errors, but the third one show this message

   "version" : 2000000,
    "protocolversion" : 70200,
    "walletversion" : 61000,
    "balance" : 0.00000000,
    "obfuscation_balance" : 0.00000000,
    "blocks" : 259200,
    "timeoffset" : 6,
    "connections" : 40,
    "proxy" : "",
    "difficulty" : 48.59999131,
    "testnet" : false,
    "keypoololdest" : 1460397145,
    "keypoolsize" : 1001,
    "paytxfee" : 0.00000000,
    "relayfee" : 0.00010000,
    "staking status" : "Staking Not Active",
    "errors" : "Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade."

Is there something we can do to solve this? Reinstall the update or something?

Thanks

HI
its not our systems thats the issue it the coin
they guys are working on a solution and im sure they will update it soon


thanks
Paul

Ok, I know that it has no relation with the hosting, with the wallet itself instead. But I was wondering if maybe could be something we could do.

Thanks

[pjcltd]

Hi Paul,

I know there is some problems with the POS transition. Two of my MN seems to be stucked at block 259200 but shows no errors, but the third one show this message

   "version" : 2000000,
    "protocolversion" : 70200,
    "walletversion" : 61000,
    "balance" : 0.00000000,
    "obfuscation_balance" : 0.00000000,
    "blocks" : 259200,
    "timeoffset" : 6,
    "connections" : 40,
    "proxy" : "",
    "difficulty" : 48.59999131,
    "testnet" : false,
    "keypoololdest" : 1460397145,
    "keypoolsize" : 1001,
    "paytxfee" : 0.00000000,
    "relayfee" : 0.00010000,
    "staking status" : "Staking Not Active",
    "errors" : "Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade."

Is there something we can do to solve this? Reinstall the update or something?

Thanks

HI
its not our systems thats the issue it the coin
they guys are working on a solution and im sure they will update it soon


thanks
Paul

Ok, I know that it has no relation with the hosting, with the wallet itself instead. But I was wondering if maybe could be something we could do.

Thanks

Hi
no we all have to sit and wait for a fix

thanks
Paul

[jakiman]

New fixed wallet v2.0.1.0 is out now.

[Samoshi]

What are the instructions to update our vps? Thanks Paul.

[jakiman]

What are the instructions to update our vps? Thanks Paul.

He's in UK so I would assume he's asleep.

[pjcltd]

Hi ok to update your VPS that is hosted at MP-Hosting

THIS WILL ONLY WORK ON MP-HOSTING SERVERS

THIS WILL UPGRADE YOUR DARKNET TO 2.0.1

MAKE SURE YOU READ THIS POST BEFORE YOU DO ANYTHING

do the foloowing


1 log onto your VPS

Code:

cd

First we need to delete the old update scrypt

Code:

rm darknet-update.sh 

then type

Code:

wget http://164.132.143.5/darknet-update.sh

you will see this on screen

Connecting to 164.132.143.5:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 514 [text/x-sh]
Saving to: 'darknet-update.sh'

100%[======================================>] 514         --.-K/s   in 0s

2016-03-17 09:54:31 (131 MB/s) - 'darknet-update.sh' saved [514/514]

next type this

Code:

 sh ./darknet-update.sh

you will see

Stopping darknet
DarkNet server stopping
Removing old Version
Downloading new version
--2016-03-17 09:54:42--  http://0.0.0.0/darknet-cli
Connecting to 164.132.143.5:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 608904 (595K)
Saving to: 'darknet-cli'

100%[======================================>] 608,904     --.-K/s   in 0.003s

2016-03-17 09:54:42 (201 MB/s) - 'darknet-cli' saved [608904/608904]

--2016-03-17 09:54:42--  http://0.0.0.0/darknet-tx
Connecting to 164.132.143.5:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1175968 (1.1M)
Saving to: 'darknet-tx'

100%[======================================>] 1,175,968   --.-K/s   in 0.006s

2016-03-17 09:54:42 (195 MB/s) - 'darknet-tx' saved [1175968/1175968]

--2016-03-17 09:54:42--  http://0.0.0.0/darknetd
Connecting to 164.132.143.5:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 5805536 (5.5M)
Saving to: 'darknetd'

100%[======================================>] 5,805,536   --.-K/s   in 0.03s

2016-03-17 09:54:42 (214 MB/s) - 'darknetd' saved [5805536/5805536]

setting permissions

*************************************************************************************

Ok this is where it changes a bit
To make sure that you are on the correct chain you will need to edit your .darknet/darknet.conf
so this update scrypt will open it up for you at the right time

When its opened up you need to delete the addnode lines and add the following

to delete the lines move the curder down to the addmode line and press

Code:

dd

that line will be removed keep pressing till they have all gone
DONT go crasy take your time

when they are all gone you can insert the new addnodes bellow by pressing

Code:

i

now can type into the new lines

Code:

addnode=72.49.184.206
addnode=68.227.30.210
addnode=74.118.192.18
addnode=68.227.23.166
addnode=138.68.50.249
addnode=173.245.157.244
addnode=173.245.158.8
addnode=coin-server.com

now you need to press the Eskape key

next press

Code:

:wq

It will then carry on starting the nodes




Starting Darket damon
DarkNet server starting
Starting Masternode
{
    "version" : 2000100,
    "protocolversion" : 70300,
    "walletversion" : 61000,
    "balance" : 0.00000000,
    "obfuscation_balance" : 0.00000000,
    "blocks" : 454,
    "timeoffset" : 0,
    "connections" : 7,
    "proxy" : "",
    "difficulty" : 37.09591186,
    "testnet" : false,
    "keypoololdest" : 1457354235,
    "keypoolsize" : 1001,
    "paytxfee" : 0.00000000,
    "relayfee" : 0.00010000,
    "staking status" : "Staking Not Active",
    "errors" : ""
}


Upodate now Done

You will now need to wait till its syinced up befor  you go to your controller wallet and start the masternodes

any problems let me know


thanks
Paul

[berron]

I have lot of problems after editing the darknet.conf with the

:wq (pushed simultaneously, one after another, first : then wq???) I have tried some combinations but due the server lag, or my imcopetency or another thing I has been unable to record my changes.

Then I have tried to stop the scrypt execution when the config file is opened. I have corrected it manually with nano darknet.conf in the .darknet directory and checked changes have been saved. All seems to be ok, ./darknetd, server started, then ./darknet-cli, but when the blockchain finish to load, i have this:

{
    "version" : 2000100,
    "protocolversion" : 70300,
    "walletversion" : 61000,
    "balance" : 0.00000000,
    "obfuscation_balance" : 0.00000000,
    "blocks" : 259200,
    "timeoffset" : 0,
    "connections" : 10,
    "proxy" : "",
    "difficulty" : 48.59999131,
    "testnet" : false,
    "keypoololdest" : 1463951312,
    "keypoolsize" : 1001,
    "paytxfee" : 0.00000000,
    "relayfee" : 0.00010000,
    "staking status" : "Staking Not Active",
    "errors" : ""}

Version seems to be correct but blocks seems to be stucked in 259200. Is this normal or the way I have updated the server doesn't work??

Thanks

[pjcltd]

I have lot of problems after editing the darknet.conf with the

:wq (pushed simultaneously, one after another, first : then wq???) I have tried some combinations but due the server lag, or my imcopetency or another thing I has been unable to record my changes.

Then I have tried to stop the scrypt execution when the config file is opened. I have corrected it manually with nano darknet.conf in the .darknet directory and checked changes have been saved. All seems to be ok, ./darknetd, server started, then ./darknet-cli, but when the blockchain finish to load, i have this:

{
    "version" : 2000100,
    "protocolversion" : 70300,
    "walletversion" : 61000,
    "balance" : 0.00000000,
    "obfuscation_balance" : 0.00000000,
    "blocks" : 259200,
    "timeoffset" : 0,
    "connections" : 10,
    "proxy" : "",
    "difficulty" : 48.59999131,
    "testnet" : false,
    "keypoololdest" : 1463951312,
    "keypoolsize" : 1001,
    "paytxfee" : 0.00000000,
    "relayfee" : 0.00010000,
    "staking status" : "Staking Not Active",
    "errors" : ""}

Version seems to be correct but blocks seems to be stucked in 259200. Is this normal or the way I have updated the server doesn't work??

Thanks

it looks like theres a issue on the block chain

thanks
Paul

[berron]

On the other hand, Paul, I had received two payments, one confirmed and one conflicted, from my MN in V2000 when I have updated my controller wallet to v2010. Just for info.

[pjcltd]

On the other hand, Paul, I had received two payments, one confirmed and one conflicted, from my MN in V2000 when I have updated my controller wallet to v2010. Just for info.

theres some very strange things going on

[berron]

Yes, I know, my controller wallet seems to have forked some minutes ago. 

[borris123]

doesnt look like that update has fixed the probs they getting stuck again.

ticket #990726 as well.

[jakiman]

New v2.0.2.0 wallet is out. It bans older clients. Looks to finally have fixed it.
https://bitcointalk.org/index.php?topic=1262920.msg15885081#msg15885081

Update: Resyncing using dev's blockchain is working fine so far.

[borris123]

ticket #762228
and
ticket #990726

please

[DRPD]

ok i made some changes to the last script from pjcltd for the new update

the script will also remove all addnode lines and add the nodes from dev post to the config file and download the blockchain from dev post.
please read more here:
https://bitcointalk.org/index.php?topic=1262920.msg15885081#msg15885081

note: i was not able to download the chain from dropbox (see the dev post above) with wget so i uploaded the chain to my google drive.
you can change the wget lines if you don't trust my files

#!/bin/bash
echo "Stopping darknet"
./darknet-cli stop
echo "Removing old Version"
rm darknetd
rm darknet-cli
sleep 90
echo " Removing old blockchain data "
cd
cd .darknet
rm -R blocks   chainstate  db.log   fee_estimates.dat  mncache.dat   peers.dat mnpayments.dat debug.log budget.dat backups  darknetd.pid  database
sed -i.bak '/addnode/d' ~/.darknet/darknet.conf
echo 'addnode=72.49.184.206' >> ~/.darknet/darknet.conf
echo 'addnode=68.227.30.210' >> ~/.darknet/darknet.conf
echo 'addnode=74.118.192.18' >> ~/.darknet/darknet.conf
echo 'addnode=138.68.50.249' >> ~/.darknet/darknet.conf
echo 'addnode=173.245.157.244' >> ~/.darknet/darknet.conf
echo 'addnode=173.245.158.8' >> ~/.darknet/darknet.conf
echo 'addnode=coin-server.com' >> ~/.darknet/darknet.conf
echo 'addnode=24.119.187.242' >> ~/.darknet/darknet.conf
wget -O darknet.zip https://doc-0s-1k-docs.googleusercontent.com/docs/securesc/ha0ro937gcuc7l7deffksulhg5h7mbp1/kh7r01tkfoc67nqbr3orghq58nkn7v6h/1470909600000/11974072493119325818/*/0B_Egj11irGZyem5ld0VHSUo3Z00?e=download
unzip darknet.zip -d ~/.darknet
rm -R darknet.zip
cd
echo "Downloading new version"
wget https://github.com/Darknet-Crypto/Darknet/releases/download/v2.0.2.0/darknet-cli
wget https://github.com/Darknet-Crypto/Darknet/releases/download/v2.0.2.0/darknetd
echo "setting permissions"
chmod +x darknet*
echo "Starting Darket damon"
./darknetd
sleep 120
echo "Starting Masternode"
./darknet-cli getinfo
sleep 10
./darknet-cli masternode start
echo "all done "


happy updating

[pjcltd]

ticket #762228
and
ticket #990726

please

Hi
ticket #762228
sorted out

looking at ticket #990726
now


thanks
Paul

[borris123]

ticket #762228
and
ticket #990726

please

Hi
ticket #762228
sorted out

looking at ticket #990726
now


thanks
Paul

cheers once #990726 is sorted can finally leave me computer alone for abit past couple of days trying get it all working been a pain.