[ANN][BXC][Bitcedi :: upto 106% Fixed deposit Interest with Encrypted Messaging]

[benjy33]

Have you tried the latest wallet? I'm using the latest release, unfortunately dev didn't release windows binaries for this release yet. ( I'm using cli and gui for linux) Everything is working fine, just not for windows.

EDIT- these are the lastest seed nodes:

  "seed0.bitcedi.org:55008",
   "seed1.bitcedi.org:55008",
   "seed2.bitcedi.org:55008"

try running some bat like , bitcedigui.exe --seed-node seednodehere

it should work.

Where is the latest version, because it is not compiled to windows...

[1715673081]

1715673081

[1715673081]

1715673081

[gavrilo77]

Have you tried the latest wallet? I'm using the latest release, unfortunately dev didn't release windows binaries for this release yet. ( I'm using cli and gui for linux) Everything is working fine, just not for windows.

EDIT- these are the lastest seed nodes:

  "seed0.bitcedi.org:55008",
   "seed1.bitcedi.org:55008",
   "seed2.bitcedi.org:55008"

try running some bat like , bitcedigui.exe --seed-node seednodehere

it should work.

Where is the latest version, because it is not compiled to windows...

On the OP page

[Pepe_Mujica]

I was able to mine like 250BXC (i mine on linux vps´s) and payments on http://pool.bitcedi.org/# shows that they have been sent to my BXC address, however bitcedid seems to be unable to connect to peers at all times, therefore I´m unable to synch to the blockchain.. I whitelisted bitcedid on firewall but still receiving this error (win 64 cli  wallet):

2017-Aug-04 16:51:35.572191 INFO [core] The daemon will start synchronizing with the network. It may take up to several hours.
2017-Aug-04 16:51:57.916729 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds
2017-Aug-04 16:52:20.748364 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds

and goes on and on, restarted the wallet, bitcedid and computer and still same error.

I think I lost my patience with this coin because there´s nowhere I could find further info about this, and seriously thinking in dropping from mining BXC.

[Pepe_Mujica]

My wallet is working, payments on main pool are working, chain is moving. Definitely not abandoned.

If you have wallet issues I might be able to help. 
Have you tried the latest wallet? I'm using the latest release, unfortunately dev didn't release windows binaries for this release yet. ( I'm using cli and gui for linux) Everything is working fine, just not for windows.

EDIT- these are the lastest seed nodes:

  "seed0.bitcedi.org:55008",
   "seed1.bitcedi.org:55008",
   "seed2.bitcedi.org:55008"

try running some bat like , bitcedigui.exe --seed-node seednodehere

it should work.
 

How? how do you put a .exe on linux?

I´ve got GUI and CLI on 2 different WIn machines and tried the CLI on linux with no luck
I cant see a config file on Win

[intec]

My wallet is working, payments on main pool are working, chain is moving. Definitely not abandoned.

If you have wallet issues I might be able to help.  
Have you tried the latest wallet? I'm using the latest release, unfortunately dev didn't release windows binaries for this release yet. ( I'm using cli and gui for linux) Everything is working fine, just not for windows.

EDIT- these are the lastest seed nodes:

  "seed0.bitcedi.org:55008",
   "seed1.bitcedi.org:55008",
   "seed2.bitcedi.org:55008"

try running some bat like , bitcedigui.exe --seed-node seednodehere

it should work.
 

How? how do you put a .exe on linux?

I´ve got GUI and CLI on 2 different WIn machines and tried the CLI on linux with no luck
I cant see a config file on Win

On windows you will have to used a .bat file to start ,

Windows : bitcediwallet.exe --seed-node seed0.bitcedi.org:55008 --seed-node seed1.bitcedi.org:55008 --seed-node seed2.bitcedi.org:55008

Linux : Latest release should be fine either compiled from source or using the GUI, please make sure you go on github and download the latest version.

[benjy33]

My wallet is working, payments on main pool are working, chain is moving. Definitely not abandoned.

If you have wallet issues I might be able to help.  
Have you tried the latest wallet? I'm using the latest release, unfortunately dev didn't release windows binaries for this release yet. ( I'm using cli and gui for linux) Everything is working fine, just not for windows.

EDIT- these are the lastest seed nodes:

  "seed0.bitcedi.org:55008",
   "seed1.bitcedi.org:55008",
   "seed2.bitcedi.org:55008"

try running some bat like , bitcedigui.exe --seed-node seednodehere

it should work.
 

How? how do you put a .exe on linux?

I´ve got GUI and CLI on 2 different WIn machines and tried the CLI on linux with no luck
I cant see a config file on Win

On windows you will have to used a .bat file to start ,

Windows : bitcediwallet.exe --seed-node seed0.bitcedi.org:55008 --seed-node seed1.bitcedi.org:55008 --seed-node seed2.bitcedi.org:55008

Linux : Latest release should be fine either compiled from source or using the GUI, please make sure you go on github and download the latest version.

Because we do not have a new windows wallet, nobody is able to compile it, many users do not know about linux

[benjy33]

Anonymous developers? SCAM

yes

[intec]

Anonymous developers? SCAM

yes

Have you tried the bat file? Should work, also dev's told me in pm they are working and will be posting here soon.

[Pepe_Mujica]

the workaround with the bat file returns the same result

ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds

(I'm using cli and gui for linux) Everything is working fine, just not for windows.

Yes I´ve got the "latest" release from github/lulworm  both for Windows and Linux I´ve tried  CLI and GUI
 getting a lot of errors on ubuntu  shell like:
root@birdman10:~/bitcedi/Bitcedi-Linux-x64CLI# ./bitcedid
./bitcedid: error while loading shared libraries: libboost_system.so.1.55.0: cannot open shared object file: No such file or directory
(I recon that could be an issue with sym links but that bitcedid version relies on v 1.55.0 when the latest is: libboost_system.so.1.58.0.1)


Meh I think this coin is dead already, pulling back my hashes from the pool...

The Slack channel is already dead.

Update: I was able to fix the libboost issue and finally run bitcedid on linux(debian 8 jessie)
But guess what....

2017-Aug-06 23:16:24.237207 INFO [daemon] bitcedi v0.1.0.cedi0001()
2017-Aug-06 23:16:24.261697 INFO [daemon] Module folder: ./bitcedid
2017-Aug-06 23:16:24.351790 INFO [daemon] Initializing p2p server...
2017-Aug-06 23:16:24.352070 INFO [node_server] Binding on 0.0.0.0:55008
2017-Aug-06 23:16:24.352202 INFO [node_server] Net service binded on 0.0.0.0:55$
2017-Aug-06 23:16:24.352266 INFO [node_server] Attempting to add IGD port mappi$
2017-Aug-06 23:16:28.356176 INFO [node_server] No IGD was found.
2017-Aug-06 23:16:28.356321 INFO [daemon] P2p server initialized OK
2017-Aug-06 23:16:28.356380 INFO [daemon] Initializing core...
2017-Aug-06 23:16:28.356563 INFO [Blockchain] Blockchain not loaded, generating$
2017-Aug-06 23:16:28.430021 INFO [Blockchain] Blockchain initialized. last bloc$
2017-Aug-06 23:16:28.430186 INFO [daemon] Core initialized OK
2017-Aug-06 23:16:28.430338 INFO [daemon] Starting core rpc server on address 1$
2017-Aug-06 23:16:28.430491 INFO [daemon] Core rpc server started ok
2017-Aug-06 23:16:28.430596 INFO [daemon] Starting p2p net loop...
2017-Aug-06 23:16:28.430681 INFO [node_server] Starting node_server
2017-Aug-06 23:16:43.433520 ERROR [node_server] Failed to connect to any of see$
2017-Aug-06 23:17:00.435133 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds


Downloaded latest version from:
https://github.com/lulworm/bitcedi/releases/download/v0.1.0/Bitcedi-Linux-x64CLI.tar.gz

It seems this is an ongoing issue since April:

https://github.com/lulworm/bitcedi/issues/2

I couldn´t find a way to specify the seed nodes for bitcedid, anyways they  may not work because they don´t work on windows anyways

[intec]

As I said for the cli :

"EDIT- these are the lastest seed nodes:

  "seed0.bitcedi.org:55008",
   "seed1.bitcedi.org:55008",
   "seed2.bitcedi.org:55008"
"


Also https://github.com/lulworm/bitcedi/releases/tag/v0.1.1 should work straight away.

Latest version is v0.1.1 not v0.1.0

[Pepe_Mujica]

As I said for the cli :

"EDIT- these are the lastest seed nodes:

  "seed0.bitcedi.org:55008",
   "seed1.bitcedi.org:55008",
   "seed2.bitcedi.org:55008"
"

Yes, you´ve said so..but IT DOESN´t WORK!!
Just because YOU are saying it does doesn´t mean it actually does.
I created a .bat file pointing bitcediwallet.exe (CLI version and GUI version separately on different win PC) with the seed nodes YOU provided and the freaking output is the freaking same.
ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds on the CLI shell and same output  on the wallet log on /AppData/Roaming

Also https://github.com/lulworm/bitcedi/releases/tag/v0.1.1 should work straight away.

Latest version is v0.1.1 not v0.1.0

that´s the latest version for the Linux GUI wallet, which is useless since I´m using Ubuntu on a VPS with putty.
I did installed vncserver and connected to it and downloaded the GUI previously, but guess what? I need to compile the freaking Qt5, forget it!

the latest version for Linux CLI is indeed v0.1.0 unless there is a newer one?

So my conclusion is that this shitcoin doesn´t deserve anymore of my time trying to get ahold of it.

[wildbud]

There is nothing worse than wasting your time on a shitcoin

[intec]

As I said for the cli :

"EDIT- these are the lastest seed nodes:

  "seed0.bitcedi.org:55008",
   "seed1.bitcedi.org:55008",
   "seed2.bitcedi.org:55008"
"

Yes, you´ve said so..but IT DOESN´t WORK!!
Just because YOU are saying it does doesn´t mean it actually does.
I created a .bat file pointing bitcediwallet.exe (CLI version and GUI version separately on different win PC) with the seed nodes YOU provided and the freaking output is the freaking same.
ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds on the CLI shell and same output  on the wallet log on /AppData/Roaming

Also https://github.com/lulworm/bitcedi/releases/tag/v0.1.1 should work straight away.

Latest version is v0.1.1 not v0.1.0

that´s the latest version for the Linux GUI wallet, which is useless since I´m using Ubuntu on a VPS with putty.
I did installed vncserver and connected to it and downloaded the GUI previously, but guess what? I need to compile the freaking Qt5, forget it!

the latest version for Linux CLI is indeed v0.1.0 unless there is a newer one?

So my conclusion is that this shitcoin doesn´t deserve anymore of my time trying to get ahold of it.

Since you are a newbie I assume your ssh putty shell can be used to compile the source code. "make" is all you need with proper dependencies.

There is nothing worse than wasting your time on a shitcoin

Are you calling XDN dev's code shitty?

[benjy33]

Have you tried the bat file? Should work, also dev's told me in pm they are working and will be posting here soon.
[/quote]

I already got the coins and I sold them I forget about this shitcoin

[Pepe_Mujica]

Since you are a newbie I assume your ssh putty shell can be used to compile the source code.

"make" is all you need with proper dependencies.

Really? No shit? you are fking awesome daddy! But the thing is, I don´t have the time to go through the hassle of a shitty GUI installation. Looking for dependency libraries, test and error.
It should be straightforward, no hassle for the user.

Since you are a newbie I assume

Well, that´s the problem fatty, you assume too much.. (Newbie to this bitshitcoin talk forum, yes)

No worries, I already gave up on this, moving on.
Good Luck on your shitcoin endeavours!

[intec]

I already got the coins and I sold them I forget about this shitcoin

Shitcoin is the currency used in your country, this is money. LOL

[schyter]

Cedi is my local currency (Ghana)
Maybe I should buy some of it

[Mast0rmind]

Why is it pumping? 

[BluRPie]

One more dead coin is pumped. Great business:) No reason just manipulation on cryptopia, dump will be very soon

[intec]

One more dead coin is pumped. Great business:) No reason just manipulation on cryptopia, dump will be very soon

Reason is, it can have same features of XDN, obviously is 1 step behind . Though its not dead as i said several times, 27kh/s on the network its not dead. Block halving next month i guess, price will rise even more, so this can be a reason.