[FS] All aluminum open-air case frames (now with support beams for USB risers)

[Spotswood]

The two PSU mining tray now comes with two support beams for USB risers, and is $115.



The risers can be securely fastened anywhere along the slotted extrusions (only 6 shown here).

The two PSU frame is 26-inches wide.







PayPal only.

Shipping from Washington State, US.




All models can handle 7-8 GPUs and are stackable.

One PSU version, 24-inches wide (same footprint as the old "Wide Open-frame Mining Tray (one PSU)"), $120 $110:







PayPal only.

Shipping from Washington State, US.


New optional GPU-only tier for the two PSU mining tray:



This option along with a dual PSU tray is the perfect frame for the  Biostar TB250-BTC PRO or ASrock H110 Pro BTC+ motherboards.







$95 $65 (for the optional GPU-tier).  PayPal only.  Shipping from Washington, US.

In order to mount 12/13 GPUs, along with the rest of a rig, also requires purchasing a standard dual PSU tray.

[ps_jb]

Nice and useful for GPU miners frame

Good luck

[Brewins]

I was wondering if you can do a build with the Wide Version but 4 tall and 2 wide.  I would prefer it be a single unit as opposed to 8 individual linked units.  I suppose the only difference would be the main vertical posts would be solid and not linked.

Let me know

[Spotswood]

I was wondering if you can do a build with the Wide Version but 4 tall and 2 wide.  I would prefer it be a single unit as opposed to 8 individual linked units.  I suppose the only difference would be the main vertical posts would be solid and not linked.

Let me know

The connection between stacked frames is very strong.  Yes, one piece corner posts is doable.

-Rich

[Brewins]

I was wondering if you can do a build with the Wide Version but 4 tall and 2 wide.  I would prefer it be a single unit as opposed to 8 individual linked units.  I suppose the only difference would be the main vertical posts would be solid and not linked.

Let me know

The connection between stacked frames is very strong.  Yes, one piece corner posts is doable.

-Rich

Let's do it-- let me know what I need to do to get it rolling

[Brewins]

8 ordered, will update when they arrive - looking forward to having them

[FlensGold]

Is there a suggested min. length for the GPUs?
Finally I managed to assemble the rig (not easy when doing it for the first time and maybe I did something wrong), but my Sapphire Radeon R9 380 GPUs seem to be too short for laying on the "back" beam.
So they can only being held by the screws on the front beam, I am not really happy with that. Or did I assemble something wrong (so an answer to my question above would be appreciated)?
Kind regards

[Spotswood]

Is there a suggested min. length for the GPUs?
Finally I managed to assemble the rig (not easy when doing it for the first time and maybe I did something wrong), but my Sapphire Radeon R9 380 GPUs seem to be too short for laying on the "back" beam.
So they can only being held by the screws on the front beam, I am not really happy with that. Or did I assemble something wrong (so an answer to my question above would be appreciated)?
Kind regards

The GPU support beam posts can be fastened to the *side* of the middle motherboard beam, as shown in this pic:

[hawkfish007]

Received my wide mining case frame today for my Nanos, looks good and seems very strong.

[Spotswood]

Received my wide mining case frame today for my Nanos, looks good and seems very strong.

Got pics?

[Spotswood]

Added a light weight version of the "wide" mining tray for only $105, plus shipping.  The assembly for this is a bit easier than the standard tray and lighter for reduced shipping charges, yet nearly as stiff/strong as the all extrusion version.  

[generalt]

Can you tell me how wide the lightweight version is?

[Spotswood]

Can you tell me how wide the lightweight version is?

Exactly the same as the standard wide version (for two PSUs):  23.5″ x 10.75″ x 11.5″ (W x D x H)

[buckrogers]

So yea, Rich is by far one of the best case or custom case builders around.

He has been doing this for a long time , and I ordered a few of my first gpu rigs from him back when mining litecoin lol.

Here is a custom creation he very recently built or me, and was very patient going over every detail for the perfect fit.

building the shell:




populating:





Each tier slides out individually, there are 4 tiers in a rack, for a total of 8 GPU rigs (6 GPU's per rig, 2 rigs per tier).
 
I am still working on populating them all, but the workmanship was superb, and I will always recommend Rich to anyone looking for a custom case. 

Thanks!

[tntdgcr]

great pricing , will order a couple to play with.

[Heardalis]

nice builds

[hawkfish007]

Received my wide mining case frame today for my Nanos, looks good and seems very strong.

Got pics?

Here is a pic of Nanos on wide mining case frame 

[Spotswood]

The product page for the Lightweight Wide Open-frame Mining Tray (two PSUs) is up.



 

[Fruition_Factory]

Does anyone have any build logs or configurations for using one of these frames for a giant vanitygen miner for making larger vanity bitcoin addresses? I currently use just a single GPU and am targeting 6 character addresses for myself but if i could find a build for say a 6 GPU vanity address rig and target 8 or 9 charecter address i would for sure get one of these frames to house it in a heartbeat.

[PPOC]

How would you go about using this frame for r9 295x2 card with radiators? I have 10 of these cards and looking for a frame that would nicely hold the card and radiators so air cooling is efficient in the same direction.