waser12
|
|
December 14, 2014, 12:42:29 PM Last edit: December 14, 2014, 12:58:01 PM by waser12 |
|
strip src/bitcoin-cli.exe strip src/bitcoind.exe strip src/qt/bitcoin-qt.exe
i can get all except bitcoin-qt.exe (the error is something like no file found)
Why please?
|
|
|
|
|
altcoinex
|
|
December 15, 2014, 02:04:00 PM |
|
strip src/bitcoin-cli.exe strip src/bitcoind.exe strip src/qt/bitcoin-qt.exe
i can get all except bitcoin-qt.exe (the error is something like no file found)
Why please?
Check the release folder as opposed to src, that is where most circumstances will place it. Also, note as in the guide, compiling the daemon and qt are separate.
|
╓╢╬╣╣╖ ┌║██████║∩ ]█████████ ╜██████╝` ╙╜╜╜` ╓╥@@@@@@╥╓ ╓╖@@╖, ,@║██████████╢@, ,╓@@╖╓ ╓╢██████╢. ╓╢███████████████╖ ║╢█████║╓ ║█████████ ,,╓╓,, ┌║█████████████████┐ ,,╓╓,, ]█████████ └╢██████║` ╓╢║██████╢║∩``╙╙╙╙╙╙╙╙╙╙╙╙╙╙╙╙╙`»╢╢██████╢║╖ ║███████╜ "╜╜╜╜` ╖╢█████████╣╜ └╢██████████@ `╜╜╜╜╜ ║██████████╜ ╙╢██████████ ┌█████████╜ ╙╢█████████ └███████╨` ╜████████ ║████╨╜ `╢█████ ╙╢╣╜ └╢█╜ ,, ,, ╓@║██┐ ┌██║@╓ ╢██████ ]█████H ╢███████∩ ┌████████ ╓@@@@╓ █████████ ║████████` ╓@@@@╖ ╓╢██████║. █████████∩ ┌█████████ ,║███████╖ ██████████ └█████████ ██████████ ]█████████ `║██████╜` └╢████████ ┌███████╣╜ ╙██████╨` `╙╜╜╙` `╙╨╢████ █████╝╜` `╙╜╜` ]@╓ ╓╖H ███╢║@╓, ,╓@╢╢███` ████████╢@╖╓. ╓╖@║████████` ]███████████╢║@╓, ,╓@╢╢████████████ ╙╢█████████████╨` ╜██████████████╜ ╙╝╢███████║╜` `╜║████████╝╜` ,╓@@@╓ `²╙`` `╙²` ╓@@@╖, ║╢█████╢H ╓╢██████H █████████ █████████` ╙╢██████╜ ╙╢██████╜ └╨╩╝┘ └╨╩╝╜ | WINFLOW | . | ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██
| . | | . | ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██
| . | |
|
|
|
hack_
|
|
December 15, 2014, 02:52:00 PM |
|
strip src/bitcoin-cli.exe strip src/bitcoind.exe strip src/qt/bitcoin-qt.exe
i can get all except bitcoin-qt.exe (the error is something like no file found)
Why please?
check config + make sure the client isnt running
|
|
|
|
cinnamon_carter
Legendary
Offline
Activity: 1148
Merit: 1018
It's about time -- All merrit accepted !!!
|
|
December 16, 2014, 02:20:15 AM |
|
last time i built it, and with 9.x i think it will show up in src/qt older 8.x builds tend to show up in the release folder.... fyi strip src/bitcoin-cli.exe strip src/bitcoind.exe strip src/qt/bitcoin-qt.exe
i can get all except bitcoin-qt.exe (the error is something like no file found)
Why please?
Check the release folder as opposed to src, that is where most circumstances will place it. Also, note as in the guide, compiling the daemon and qt are separate.
|
Check out my coin Photon Merge Mine 5 other Blake 256 coins - 6x your hash power https://www.blakecoin.org/The obvious choice is not always the best choice. LOOK DEEPER - Look into the Blake 256 Family -- CC
|
|
|
hack_
|
|
December 16, 2014, 02:41:36 AM |
|
just finished the build, will test today. So is the qt-everywhere-opensource a more complete version of QT?
|
|
|
|
nitrogenetics (OP)
|
|
December 16, 2014, 03:56:03 PM |
|
If you are going to compile qtwebkit (not required for reference implementation) you will need the full package, not just base and tools.
|
BTC: 1NWQ4TarCCC7j1XY26KRFFEtLYbPP6S3DH XRP: rJkbeyRaUYDmcukEyLYVfn56QDM9VhybZG
|
|
|
altcoinex
|
|
December 17, 2014, 04:24:13 PM |
|
Further reading for QTWebkit On Windows, includes direct method and a simpler working MingW method: https://trac.webkit.org/wiki/BuildingQtOnWindows
|
╓╢╬╣╣╖ ┌║██████║∩ ]█████████ ╜██████╝` ╙╜╜╜` ╓╥@@@@@@╥╓ ╓╖@@╖, ,@║██████████╢@, ,╓@@╖╓ ╓╢██████╢. ╓╢███████████████╖ ║╢█████║╓ ║█████████ ,,╓╓,, ┌║█████████████████┐ ,,╓╓,, ]█████████ └╢██████║` ╓╢║██████╢║∩``╙╙╙╙╙╙╙╙╙╙╙╙╙╙╙╙╙`»╢╢██████╢║╖ ║███████╜ "╜╜╜╜` ╖╢█████████╣╜ └╢██████████@ `╜╜╜╜╜ ║██████████╜ ╙╢██████████ ┌█████████╜ ╙╢█████████ └███████╨` ╜████████ ║████╨╜ `╢█████ ╙╢╣╜ └╢█╜ ,, ,, ╓@║██┐ ┌██║@╓ ╢██████ ]█████H ╢███████∩ ┌████████ ╓@@@@╓ █████████ ║████████` ╓@@@@╖ ╓╢██████║. █████████∩ ┌█████████ ,║███████╖ ██████████ └█████████ ██████████ ]█████████ `║██████╜` └╢████████ ┌███████╣╜ ╙██████╨` `╙╜╜╙` `╙╨╢████ █████╝╜` `╙╜╜` ]@╓ ╓╖H ███╢║@╓, ,╓@╢╢███` ████████╢@╖╓. ╓╖@║████████` ]███████████╢║@╓, ,╓@╢╢████████████ ╙╢█████████████╨` ╜██████████████╜ ╙╝╢███████║╜` `╜║████████╝╜` ,╓@@@╓ `²╙`` `╙²` ╓@@@╖, ║╢█████╢H ╓╢██████H █████████ █████████` ╙╢██████╜ ╙╢██████╜ └╨╩╝┘ └╨╩╝╜ | WINFLOW | . | ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██
| . | | . | ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██
| . | |
|
|
|
petrolefr
Member
Offline
Activity: 476
Merit: 10
|
|
December 20, 2014, 03:56:01 PM |
|
Thanks for this excellent guide.
It's possible to compile bitcoin 0.8.6 with qt 5.3.2 or i have to install qt 4.8.6?
|
|
|
|
nitrogenetics (OP)
|
|
December 20, 2014, 06:42:59 PM |
|
Yes, but only after applying patches for qt5 compatibility to 0.8.6 sources: Remove #define loop from util.h and replace loop with while (true) in src/bitcoinrpc.cpp src/main.cpp src/net.cpp src/script.cpp src/util.cpp src/wallet.cpp src/walletdb.cpp see: https://github.com/bitcoin/bitcoin/commit/8351d55cd3955c95c5e3fe065a456db08cc8a559Qt5 compatibility. #if QT_VERSION < 0x050000 ... in src/qt/addressbookpage.cpp src/qt/bitcoin.cpp src/qt/bitcoingui.cpp src/qt/guiutil.cpp src/qt/paymentserver.cpp src/qt/qrcodedialog.cpp src/qt/rpcconsole.cpp src/qt/sendcoinsdialog.cpp src/qt/transactionview.cpp src/qt/walletview.cpp see: https://github.com/bitcoin/bitcoin/commit/25c0cce7fb494fcb871d134e28b26504d30e34d3http://qt-project.org/doc/qt-5.0/qtdoc/sourcebreaks.htmlhttp://qt-project.org/wiki/Transition_from_Qt_4.x_to_Qt5Qt5 compatibility patch: --- bitcoinrpc.cpp Thu Dec 05 13:11:26 2013 +++ bitcoinrpc.cpp Tue Dec 31 02:25:11 2013 @@ -417,7 +417,7 @@ int ReadHTTPHeaders(std::basic_istream<char>& stream, map<string, string>& mapHeadersRet) { int nLen = 0; - loop + while (true) { string str; std::getline(stream, str); --- main.cpp Thu Dec 05 13:11:26 2013 +++ main.cpp Tue Dec 31 02:25:11 2013 @@ -4551,7 +4551,7 @@ CReserveKey reservekey(pwallet); unsigned int nExtraNonce = 0; - try { loop { + try { while (true) { while (vNodes.empty()) MilliSleep(1000); @@ -4591,7 +4591,7 @@ uint256 hashTarget = CBigNum().SetCompact(pblock->nBits).getuint256(); uint256 hashbuf[2]; uint256& hash = *alignup<16>(hashbuf); - loop + while (true) { unsigned int nHashesDone = 0; unsigned int nNonceFound; --- net.cpp Thu Dec 05 13:11:26 2013 +++ net.cpp Tue Dec 31 02:25:11 2013 @@ -135,7 +135,7 @@ bool RecvLine(SOCKET hSocket, string& strLine) { strLine = ""; - loop + while (true) { char c; int nBytes = recv(hSocket, &c, 1, 0); @@ -307,7 +307,7 @@ { if (strLine.empty()) // HTTP response is separated from headers by blank line { - loop + while (true) { if (!RecvLine(hSocket, strLine)) { @@ -750,7 +750,7 @@ void ThreadSocketHandler() { unsigned int nPrevNodeCount = 0; - loop + while (true) { // // Disconnect nodes @@ -1114,7 +1114,7 @@ string strDesc = "Bitcoin " + FormatFullVersion(); try { - loop { + while (true) { #ifndef UPNPDISCOVER_SUCCESS /* miniupnpc 1.5 */ r = UPNP_AddPortMapping(urls.controlURL, data.first.servicetype, @@ -1378,7 +1378,7 @@ // Initiate network connections int64 nStart = GetTime(); - loop + while (true) { ProcessOneShot(); @@ -1429,7 +1429,7 @@ int64 nANow = GetAdjustedTime(); int nTries = 0; - loop + while (true) { // use an nUnkBias between 10 (no outgoing connections) and 90 (8 outgoing connections) CAddress addr = addrman.Select(10 + min(nOutbound,8)*10); --- script.cpp Thu Dec 05 13:11:26 2013 +++ script.cpp Tue Dec 31 02:25:11 2013 @@ -1163,7 +1163,7 @@ // Compare CScript::const_iterator pc1 = script1.begin(); CScript::const_iterator pc2 = script2.begin(); - loop + while (true) { if (pc1 == script1.end() && pc2 == script2.end()) { --- util.cpp Thu Dec 05 13:11:26 2013 +++ util.cpp Tue Dec 31 02:25:11 2013 @@ -311,7 +311,7 @@ char* p = buffer; int limit = sizeof(buffer); int ret; - loop + while (true) { va_list arg_ptr; va_copy(arg_ptr, ap); @@ -371,7 +371,7 @@ return; string::size_type i1 = 0; string::size_type i2; - loop + while (true) { i2 = str.find(c, i1); if (i2 == str.npos) @@ -500,7 +500,7 @@ { // convert hex dump to vector vector<unsigned char> vch; - loop + while (true) { while (isspace(*psz)) psz++; @@ -954,7 +954,7 @@ bool WildcardMatch(const char* psz, const char* mask) { - loop + while (true) { switch (*mask) { --- util.h Thu Dec 05 13:11:26 2013 +++ util.h Tue Dec 31 02:25:11 2013 @@ -37,7 +37,6 @@ static const int64 COIN = 100000000; static const int64 CENT = 1000000; -#define loop for (;;) #define BEGIN(a) ((char*)&(a)) #define END(a) ((char*)&((&(a))[1])) #define UBEGIN(a) ((unsigned char*)&(a)) --- wallet.cpp Thu Dec 05 13:11:26 2013 +++ wallet.cpp Tue Dec 31 02:25:11 2013 @@ -1173,7 +1173,7 @@ LOCK2(cs_main, cs_wallet); { nFeeRet = nTransactionFee; - loop + while (true) { wtxNew.vin.clear(); wtxNew.vout.clear(); --- walletdb.cpp Thu Dec 05 13:11:26 2013 +++ walletdb.cpp Tue Dec 31 02:25:11 2013 @@ -73,7 +73,7 @@ if (!pcursor) throw runtime_error("CWalletDB::ListAccountCreditDebit() : cannot create DB cursor"); unsigned int fFlags = DB_SET_RANGE; - loop + while (true) { // Read next record CDataStream ssKey(SER_DISK, CLIENT_VERSION); @@ -415,7 +415,7 @@ return DB_CORRUPT; } - loop + while (true) { // Read next record CDataStream ssKey(SER_DISK, CLIENT_VERSION); --- qt/addressbookpage.cpp Thu Dec 05 13:11:26 2013 +++ qt/addressbookpage.cpp Tue Dec 31 02:25:11 2013 @@ -143,8 +143,13 @@ ui->tableView->sortByColumn(0, Qt::AscendingOrder); // Set column widths +#if QT_VERSION < 0x050000 ui->tableView->horizontalHeader()->setResizeMode(AddressTableModel::Label, QHeaderView::Stretch); ui->tableView->horizontalHeader()->setResizeMode(AddressTableModel::Address, QHeaderView::ResizeToContents); +#else + ui->tableView->horizontalHeader()->setSectionResizeMode(AddressTableModel::Label, QHeaderView::Stretch); + ui->tableView->horizontalHeader()->setSectionResizeMode(AddressTableModel::Address, QHeaderView::ResizeToContents); +#endif connect(ui->tableView->selectionModel(), SIGNAL(selectionChanged(QItemSelection,QItemSelection)), this, SLOT(selectionChanged())); --- qt/bitcoin.cpp Thu Dec 05 13:11:26 2013 +++ qt/bitcoin.cpp Tue Dec 31 02:25:11 2013 @@ -17,7 +17,9 @@ #include "splashscreen.h" #include <QMessageBox> +#if QT_VERSION < 0x050000 #include <QTextCodec> +#endif #include <QLocale> #include <QTimer> #include <QTranslator> @@ -118,9 +120,11 @@ // Command-line options take precedence: ParseParameters(argc, argv); +#if QT_VERSION < 0x050000 // Internal string conversion is all UTF-8 QTextCodec::setCodecForTr(QTextCodec::codecForName("UTF-8")); QTextCodec::setCodecForCStrings(QTextCodec::codecForTr()); +#endif Q_INIT_RESOURCE(bitcoin); QApplication app(argc, argv); --- qt/bitcoingui.cpp Thu Dec 05 13:11:26 2013 +++ qt/bitcoingui.cpp Tue Dec 31 02:25:11 2013 @@ -44,7 +44,9 @@ #include <QMovie> #include <QTimer> #include <QDragEnterEvent> +#if QT_VERSION < 0x050000 #include <QUrl> +#endif #include <QMimeData> #include <QStyle> #include <QSettings> --- qt/guiutil.cpp Thu Dec 05 13:11:26 2013 +++ qt/guiutil.cpp Tue Dec 31 02:25:11 2013 @@ -13,8 +13,12 @@ #include <QDoubleValidator> #include <QFont> #include <QLineEdit> +#if QT_VERSION >= 0x050000 +#include <QUrlQuery> +#else #include <QUrl> -#include <QTextDocument> // For Qt::escape +#endif +#include <QTextDocument> // for Qt::mightBeRichText #include <QAbstractItemView> #include <QClipboard> #include <QFileDialog> @@ -86,7 +90,13 @@ SendCoinsRecipient rv; rv.address = uri.path(); rv.amount = 0; + +#if QT_VERSION < 0x050000 QList<QPair<QString, QString> > items = uri.queryItems(); +#else + QUrlQuery uriQuery(uri); + QList<QPair<QString, QString> > items = uriQuery.queryItems(); +#endif for (QList<QPair<QString, QString> >::iterator i = items.begin(); i != items.end(); i++) { bool fShouldReturnFalse = false; @@ -139,7 +149,11 @@ QString HtmlEscape(const QString& str, bool fMultiLine) { +#if QT_VERSION < 0x050000 QString escaped = Qt::escape(str); +#else + QString escaped = str.toHtmlEscaped(); +#endif if(fMultiLine) { escaped = escaped.replace("\n", "<br>\n"); @@ -176,7 +190,11 @@ QString myDir; if(dir.isEmpty()) // Default to user documents location { +#if QT_VERSION < 0x050000 myDir = QDesktopServices::storageLocation(QDesktopServices::DocumentsLocation); +#else + myDir = QStandardPaths::writableLocation(QStandardPaths::DocumentsLocation); +#endif } else { --- qt/paymentserver.cpp Thu Dec 05 13:11:26 2013 +++ qt/paymentserver.cpp Tue Dec 31 02:25:11 2013 @@ -18,7 +18,9 @@ #include <QLocalServer> #include <QLocalSocket> #include <QStringList> +#if QT_VERSION < 0x050000 #include <QUrl> +#endif using namespace boost; --- qt/qrcodedialog.cpp Thu Dec 05 13:11:26 2013 +++ qt/qrcodedialog.cpp Tue Dec 31 02:25:11 2013 @@ -7,7 +7,9 @@ #include "optionsmodel.h" #include <QPixmap> +#if QT_VERSION < 0x050000 #include <QUrl> +#endif #include <qrencode.h> --- qt/rpcconsole.cpp Thu Dec 05 13:11:26 2013 +++ qt/rpcconsole.cpp Tue Dec 31 02:25:11 2013 @@ -8,7 +8,9 @@ #include <QTime> #include <QThread> #include <QKeyEvent> +#if QT_VERSION < 0x050000 #include <QUrl> +#endif #include <QScrollBar> #include <openssl/crypto.h> --- qt/sendcoinsdialog.cpp Thu Dec 05 13:11:26 2013 +++ qt/sendcoinsdialog.cpp Tue Dec 31 02:25:11 2013 @@ -93,7 +93,11 @@ QStringList formatted; foreach(const SendCoinsRecipient &rcp, recipients) { +#if QT_VERSION < 0x050000 formatted.append(tr("<b>%1</b> to %2 (%3)").arg(BitcoinUnits::formatWithUnit(BitcoinUnits::BTC, rcp.amount), Qt::escape(rcp.label), rcp.address)); +#else + formatted.append(tr("<b>%1</b> to %2 (%3)").arg(BitcoinUnits::formatWithUnit(BitcoinUnits::BTC, rcp.amount), rcp.label.toHtmlEscaped(), rcp.address)); +#endif } fNewRecipientAllowed = false; --- qt/transactionview.cpp Thu Dec 05 13:11:26 2013 +++ qt/transactionview.cpp Tue Dec 31 02:25:11 2013 @@ -176,7 +176,11 @@ transactionView->horizontalHeader()->resizeSection(TransactionTableModel::Status, 23); transactionView->horizontalHeader()->resizeSection(TransactionTableModel::Date, 120); transactionView->horizontalHeader()->resizeSection(TransactionTableModel::Type, 120); +#if QT_VERSION < 0x050000 transactionView->horizontalHeader()->setResizeMode(TransactionTableModel::ToAddress, QHeaderView::Stretch); +#else + transactionView->horizontalHeader()->setSectionResizeMode(TransactionTableModel::ToAddress, QHeaderView::Stretch); +#endif transactionView->horizontalHeader()->resizeSection(TransactionTableModel::Amount, 100); } } --- qt/walletview.cpp Thu Dec 05 13:11:26 2013 +++ qt/walletview.cpp Tue Dec 31 02:25:11 2013 @@ -21,7 +21,11 @@ #include <QHBoxLayout> #include <QVBoxLayout> #include <QAction> +#if QT_VERSION < 0x050000 #include <QDesktopServices> +#else +#include <QStandardPaths> +#endif #include <QFileDialog> #include <QPushButton> @@ -233,7 +237,11 @@ void WalletView::backupWallet() { +#if QT_VERSION < 0x050000 QString saveDir = QDesktopServices::storageLocation(QDesktopServices::DocumentsLocation); +#else + QString saveDir = QStandardPaths::writableLocation(QStandardPaths::DocumentsLocation); +#endif QString filename = QFileDialog::getSaveFileName(this, tr("Backup Wallet"), saveDir, tr("Wallet Data (*.dat)")); if (!filename.isEmpty()) { if (!walletModel->backupWallet(filename)) {
|
BTC: 1NWQ4TarCCC7j1XY26KRFFEtLYbPP6S3DH XRP: rJkbeyRaUYDmcukEyLYVfn56QDM9VhybZG
|
|
|
corymb28
Newbie
Offline
Activity: 1
Merit: 0
|
|
December 22, 2014, 09:48:22 PM |
|
I'm using db-4.8.30.NC.tar.gz, latest mingw ($ gcc -v => Reading specs from /usr/lib/gcc/i686-pc-msys/3.4.4/specs) cd build_unix ../dist/configure --enable-cxx --enable-mingw --disable-pthread_api --disable-replication After this completes @ Line 113 Replace typedef pthread_t db_threadid_t; with typedef u_int32_t db_threadid_t; Got error: $ make ./libtool --mode=compile gcc -c -I. -I../dist/.. -O3 ../dist/../mutex/mut_win3 2.c libtool: compile: gcc -c -I. -I../dist/.. -O3 ../dist/../mutex/mut_win32.c -DD LL_EXPORT -DPIC -o .libs/mut_win32.o In file included from ./db_int.h:96, from ../dist/../mutex/mut_win32.c:12: ../dist/../dbinc/win_db.h:23:20: direct.h: No such file or directory ../dist/../dbinc/win_db.h:35:19: tchar.h: No such file or directory In file included from ../dist/../dbinc/win_db.h:49, from ./db_int.h:96, from ../dist/../mutex/mut_win32.c:12: /usr/lib/gcc/i686-pc-msys/3.4.4/../../../../include/w32api/winsock2.h:103:2: war ning: #warning "fd_set and associated macros have been defined in sys/types. This may cause runtime problems with W32 sockets" In file included from /usr/include/unistd.h:6, from ./db.h:29, from ./db_int.h:99, from ../dist/../mutex/mut_win32.c:12: /usr/include/sys/unistd.h:62: error: conflicting types for 'GetCurrentProcessId'
/usr/lib/gcc/i686-pc-msys/3.4.4/../../../../include/w32api/winbase.h:1434: error : previous declaration of 'GetCurrentProcessId' was here /usr/include/sys/unistd.h:62: error: conflicting types for 'GetCurrentProcessId'
/usr/lib/gcc/i686-pc-msys/3.4.4/../../../../include/w32api/winbase.h:1434: error : previous declaration of 'GetCurrentProcessId' was here ../dist/../mutex/mut_win32.c:33: error: invalid initializer ../dist/../mutex/mut_win32.c: In function `get_handle': ../dist/../mutex/mut_win32.c:43: error: invalid initializer make: *** [mut_win32.lo] Error 1
How to fix it?
|
|
|
|
nitrogenetics (OP)
|
|
December 23, 2014, 03:23:08 PM |
|
Make sure not to use msys-gcc: uninstall relevant packages or delete mingw install dir and reinstall required msys packages only.
|
BTC: 1NWQ4TarCCC7j1XY26KRFFEtLYbPP6S3DH XRP: rJkbeyRaUYDmcukEyLYVfn56QDM9VhybZG
|
|
|
presstab
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
|
January 03, 2015, 04:21:19 PM |
|
nitrogenics, this is one of my typical threads that I check in with every so often. You are doing an awesome job here (and others that help are too). Just installed the build environment on a new machine. A few notes (and this really applies to older altcoins, not specifically bitcoin which i did not attempt to build): 1) Boost 1.57 seems to have some problems with QT < 5. Throwing errors on BOOST_JOIN's. Boost 1.55 works fine. 2) I had same problem with miniupnpc as mentioned by others earlier in the thread. I built with 1.8 instead and it worked fine. 3) sending a small tip to your btc address, thanks for maintaining this thread!
|
|
|
|
nitrogenetics (OP)
|
|
January 03, 2015, 04:54:01 PM |
|
Thanks, much appreciated You can find more info about BOOST_JOIN error here: https://bugreports.qt-project.org/browse/QTBUG-22829I successfully used the suggested workaround of wrapping has_binary_operator.hpp inside an #ifndef Q_MOC_RUN with boost 1.57. When using current 1.9 miniupnpc sources make sure to define -DMINIUPNP_STATICLIB instead of -DSTATICLIB (v1.9 release still needs -DSTATICLIB). Hope that helps
|
BTC: 1NWQ4TarCCC7j1XY26KRFFEtLYbPP6S3DH XRP: rJkbeyRaUYDmcukEyLYVfn56QDM9VhybZG
|
|
|
Mike M
Newbie
Offline
Activity: 3
Merit: 0
|
|
January 05, 2015, 02:46:28 AM Last edit: January 05, 2015, 08:14:43 PM by Mike M |
|
Anyone having problems linking with libQt5Gui.a? I'm using 64bit binaries and have built the steps leading up to Qt qttools-opensource-src-5.3.2 with no issues. The link for Qtdiag.exe doesn't seem to want to work. I'm not an expert at this but know the basics and have managed to get up to here with no errors. I've followed the current instructions as they are (great guide btw!).
I'm wondering how many have actually installed using 64bit. My next step will be to try with 32 if I can't get this resolved. Google searches show a similar problem but so far none resolved.
This is the link and error: g++ -Wl,--gc-sections -Wl,-s -Wl,-subsystem,console -o C:/Qt/5.3.2/bin/qtdiag.exe .obj/release/main.o .obj/release/qtdiag.o .obj/release/qtdiag_plugin_import.o -LC:/deps/libpng-1.6.15/.libs -LC:/deps/openssl-1.0.1j -LC:/Qt/5.3.2/lib -LC:/Qt/5.3.2/plugins/bearer -lqgenericbearer -lqnativewifibearer -lQt5Network -ldnsapi -lcrypt32 -LC:/Qt/5.3.2/plugins/platforms -lqwindows -lwinspool -lshlwapi -lQt5PlatformSupport -LC:/Qt/5.3.2/plugins/imageformats -lqico -lQt5Gui -lgdi32 -lcomdlg32 -loleaut32 -limm32 -lwinmm -lpng -lQt5Core -lole32 -luuid -lws2_32 -ladvapi32 -lshell32 -luser32 -lkernel32 -lz
C:/Qt/5.3.2/lib/libQt5Gui.a(qimage.o):qimage.cpp:(.text+0x6ae9): undefined reference to `qt_memfill32(unsigned int*, unsigned int, int)' C:/Qt/5.3.2/lib/libQt5Gui.a(qimage.o):qimage.cpp:(.text+0x6be9): undefined reference to `qt_memfill16(unsigned short*, unsigned short, int)' C:/Qt/5.3.2/lib/libQt5Gui.a(qimage.o):qimage.cpp:(.text+0x6d7d): undefined reference to `qt_memfill32(unsigned int*, unsigned int, int)' C:/Qt/5.3.2/lib/libQt5Gui.a(qimage.o):qimage.cpp:(.text+0x6e6b): undefined reference to `qt_memfill16(unsigned short*, unsigned short, int)' c:/mingw64/bin/../lib/gcc/x86_64-w64-mingw32/4.9.2/../../../../x86_64-w64-mingw32/bin/ld.exe: C:/Qt/5.3.2/lib/libQt5Gui.a(qimage.o): bad reloc address 0x0 in section `.pdata'
collect2.exe: error: ld returned 1 exit status Makefile.Release:81: recipe for target 'C:/Qt/5.3.2/bin/qtdiag.exe' failed mingw32-make[3]: *** [C:/Qt/5.3.2/bin/qtdiag.exe] Error 1 mingw32-make[3]: Leaving directory 'c:/Qt/qttools-opensource-src-5.3.2/src/qtdiag' Makefile:34: recipe for target 'release' failed mingw32-make[2]: *** [release] Error 2 mingw32-make[2]: Leaving directory 'c:/Qt/qttools-opensource-src-5.3.2/src/qtdiag' Makefile:220: recipe for target 'sub-qtdiag-make_first' failed mingw32-make[1]: *** [sub-qtdiag-make_first] Error 2
|
|
|
|
bitcoinrulzz
|
|
January 05, 2015, 08:51:54 PM |
|
Thanks, much appreciated You can find more info about BOOST_JOIN error here: https://bugreports.qt-project.org/browse/QTBUG-22829I successfully used the suggested workaround of wrapping has_binary_operator.hpp inside an #ifndef Q_MOC_RUN with boost 1.57. When using current 1.9 miniupnpc sources make sure to define -DMINIUPNP_STATICLIB instead of -DSTATICLIB (v1.9 release still needs -DSTATICLIB). Hope that helps I am getting same error: C:\Qt\4.8.6\bin\moc.exe -DUNICODE -DQT_GUI -DBOOST_THREAD_USE_LIB -DBOOST_SPIRIT _THREADSAFE -DUSE_QRCODE -DUSE_UPNP=1 -DSTATICLIB -DUSE_IPV6=1 -DWIN32 -D_MT -DQ T_THREAD_SUPPORT -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_ HAVE_MMX -DQT_HAVE_SSE -DQT_HAVE_MMXEXT -DQT_HAVE_SSE2 -I"..\Qt\4.8.6\include\Qt Core" -I"..\Qt\4.8.6\include\QtNetwork" -I"..\Qt\4.8.6\include\QtGui" -I"..\Qt\4 .8.6\include" -I"src" -I"src\json" -I"src\qt" -I"..\deps" -I"src\leveldb\include " -I"src\leveldb\helpers" -I"..\deps\boost_1_57_0" -I"..\deps\db-4.8.30.NC\build _unix" -I"..\deps\openssl-1.0.1j\include" -I"..\deps\qrencode-3.4.4" -I"..\Qt\4. 8.6\include\ActiveQt" -I"build" -I"build" -I"..\Qt\4.8.6\mkspecs\default" -D__GN UC__ -DWIN32 src\qt\rpcconsole.cpp -o build\rpcconsole.moc :/deps/boost_1_57_0/boost/type_traits/detail/ has_binary_operator.hp:50: Parse er ror at "BOOST_JOIN"Makefile.Release:742: recipe for target 'build/rpcconsole.moc' failed mingw32-make: *** [build/rpcconsole.moc] Error 1 Can you be more specific & detail as to what needs to change in has_binary_operator.hpp
|
|
|
|
nitrogenetics (OP)
|
|
January 05, 2015, 11:08:11 PM |
|
Anyone having problems linking with libQt5Gui.a? I'm using 64bit binaries and have built the steps leading up to Qt qttools-opensource-src-5.3.2 with no issues. The link for Qtdiag.exe doesn't seem to want to work. I'm not an expert at this but know the basics and have managed to get up to here with no errors. I've followed the current instructions as they are (great guide btw!).
I'm wondering how many have actually installed using 64bit. My next step will be to try with 32 if I can't get this resolved. Google searches show a similar problem but so far none resolved.
It has been a while since I did a 64bit build. I'll give it a try and report back. Can you be more specific & detail as to what needs to change in has_binary_operator.hpp
Try wrapping has_binary_operator.hpp code inside an #ifndef Q_MOC_RUN statement: --- has_binary_operator.hpp Thu Oct 30 11:47:21 2014 +++ has_binary_operator.hpp Mon Jan 05 23:58:51 2015 @@ -6,6 +6,7 @@ // // See http://www.boost.org/libs/type_traits for most recent version including documentation. +#ifndef Q_MOC_RUN #include <boost/config.hpp> #include <boost/type_traits/ice.hpp> #include <boost/type_traits/integral_constant.hpp> @@ -227,3 +228,4 @@ #endif #include <boost/type_traits/detail/bool_trait_undef.hpp> +#endif
|
BTC: 1NWQ4TarCCC7j1XY26KRFFEtLYbPP6S3DH XRP: rJkbeyRaUYDmcukEyLYVfn56QDM9VhybZG
|
|
|
bitcoinrulzz
|
|
January 06, 2015, 12:09:04 AM |
|
Anyone having problems linking with libQt5Gui.a? I'm using 64bit binaries and have built the steps leading up to Qt qttools-opensource-src-5.3.2 with no issues. The link for Qtdiag.exe doesn't seem to want to work. I'm not an expert at this but know the basics and have managed to get up to here with no errors. I've followed the current instructions as they are (great guide btw!).
I'm wondering how many have actually installed using 64bit. My next step will be to try with 32 if I can't get this resolved. Google searches show a similar problem but so far none resolved.
It has been a while since I did a 64bit build. I'll give it a try and report back. Can you be more specific & detail as to what needs to change in has_binary_operator.hpp
Try wrapping has_binary_operator.hpp code inside an #ifndef Q_MOC_RUN statement: --- has_binary_operator.hpp Thu Oct 30 11:47:21 2014 +++ has_binary_operator.hpp Mon Jan 05 23:58:51 2015 @@ -6,6 +6,7 @@ // // See http://www.boost.org/libs/type_traits for most recent version including documentation. +#ifndef Q_MOC_RUN #include <boost/config.hpp> #include <boost/type_traits/ice.hpp> #include <boost/type_traits/integral_constant.hpp> @@ -227,3 +228,4 @@ #endif #include <boost/type_traits/detail/bool_trait_undef.hpp> +#endif
Thanks I see it went further but still getting error after some time.....\deps\boost_1_57_0/boost/thread/win32/shared_mutex.hpp:53:52: warning: derefer encing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] C:\Qt\4.8.6\bin\moc.exe -DUNICODE -DQT_GUI -DBOOST_THREAD_USE_LIB -DBOOST_SPIRIT _THREADSAFE -DUSE_QRCODE -DUSE_UPNP=1 -DSTATICLIB -DUSE_IPV6=1 -DWIN32 -D_MT -DQ T_THREAD_SUPPORT -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_ HAVE_MMX -DQT_HAVE_SSE -DQT_HAVE_MMXEXT -DQT_HAVE_SSE2 -I"..\Qt\4.8.6\include\Qt Core" -I"..\Qt\4.8.6\include\QtNetwork" -I"..\Qt\4.8.6\include\QtGui" -I"..\Qt\4 .8.6\include" -I"src" -I"src\json" -I"src\qt" -I"..\deps" -I"src\leveldb\include " -I"src\leveldb\helpers" -I"..\deps\boost_1_57_0" -I"..\deps\db-4.8.30.NC\build _unix" -I"..\deps\openssl-1.0.1j\include" -I"..\deps\qrencode-3.4.4" -I"..\Qt\4. 8.6\include\ActiveQt" -I"build" -I"build" -I"..\Qt\4.8.6\mkspecs\default" -D__GN UC__ -DWIN32 src\qt\rpcconsole.cpp -o build\rpcconsole.moc :/deps/boost_1_57_0/boost/type_traits/detail/has_binary_operator.hp:53: Parse er ror at "BOOST_JOIN" Makefile.Release:742: recipe for target 'build/rpcconsole.moc' failed mingw32-make: *** [build/rpcconsole.moc] Error 1Here is my updated file has_binary_operator.hpp looks like... // (C) Copyright 2009-2011 Frederic Bron, Robert Stewart, Steven Watanabe & Roman Perepelitsa. // // Use, modification and distribution are subject to the Boost Software License, // Version 1.0. (See accompanying file LICENSE_1_0.txt or copy at // http://www.boost.org/LICENSE_1_0.txt). // // See http://www.boost.org/libs/type_traits for most recent version including documentation.
#ifndef Q_MOC_RUN #include <boost/config.hpp> #include <boost/type_traits/ice.hpp> #include <boost/type_traits/integral_constant.hpp> #include <boost/type_traits/is_base_of.hpp> #include <boost/type_traits/is_const.hpp> #include <boost/type_traits/is_convertible.hpp> #include <boost/type_traits/is_fundamental.hpp> #include <boost/type_traits/is_integral.hpp> #include <boost/type_traits/is_pointer.hpp> #include <boost/type_traits/is_same.hpp> #include <boost/type_traits/is_void.hpp> #include <boost/type_traits/remove_cv.hpp> #include <boost/type_traits/remove_pointer.hpp> #include <boost/type_traits/remove_reference.hpp>
// should be the last #include #include <boost/type_traits/detail/bool_trait_def.hpp> #endif
|
|
|
|
RJX
Legendary
Offline
Activity: 1078
Merit: 1003
|
|
January 06, 2015, 09:24:31 AM |
|
Hi,
Can I use this guide to compile 'some altcoins' wallet? It's an X11 algo coin.
|
|
|
|
pupotroll
Newbie
Offline
Activity: 1
Merit: 0
|
|
January 06, 2015, 02:51:22 PM |
|
Anyone having problems linking with libQt5Gui.a? I'm using 64bit binaries and have built the steps leading up to Qt qttools-opensource-src-5.3.2 with no issues. The link for Qtdiag.exe doesn't seem to want to work. I'm not an expert at this but know the basics and have managed to get up to here with no errors. I've followed the current instructions as they are (great guide btw!).
I'm wondering how many have actually installed using 64bit. My next step will be to try with 32 if I can't get this resolved. Google searches show a similar problem but so far none resolved.
It has been a while since I did a 64bit build. I'll give it a try and report back. Can you be more specific & detail as to what needs to change in has_binary_operator.hpp
Try wrapping has_binary_operator.hpp code inside an #ifndef Q_MOC_RUN statement: --- has_binary_operator.hpp Thu Oct 30 11:47:21 2014 +++ has_binary_operator.hpp Mon Jan 05 23:58:51 2015 @@ -6,6 +6,7 @@ // // See http://www.boost.org/libs/type_traits for most recent version including documentation. +#ifndef Q_MOC_RUN #include <boost/config.hpp> #include <boost/type_traits/ice.hpp> #include <boost/type_traits/integral_constant.hpp> @@ -227,3 +228,4 @@ #endif #include <boost/type_traits/detail/bool_trait_undef.hpp> +#endif
Thanks I see it went further but still getting error after some time.....\deps\boost_1_57_0/boost/thread/win32/shared_mutex.hpp:53:52: warning: derefer encing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] C:\Qt\4.8.6\bin\moc.exe -DUNICODE -DQT_GUI -DBOOST_THREAD_USE_LIB -DBOOST_SPIRIT _THREADSAFE -DUSE_QRCODE -DUSE_UPNP=1 -DSTATICLIB -DUSE_IPV6=1 -DWIN32 -D_MT -DQ T_THREAD_SUPPORT -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_ HAVE_MMX -DQT_HAVE_SSE -DQT_HAVE_MMXEXT -DQT_HAVE_SSE2 -I"..\Qt\4.8.6\include\Qt Core" -I"..\Qt\4.8.6\include\QtNetwork" -I"..\Qt\4.8.6\include\QtGui" -I"..\Qt\4 .8.6\include" -I"src" -I"src\json" -I"src\qt" -I"..\deps" -I"src\leveldb\include " -I"src\leveldb\helpers" -I"..\deps\boost_1_57_0" -I"..\deps\db-4.8.30.NC\build _unix" -I"..\deps\openssl-1.0.1j\include" -I"..\deps\qrencode-3.4.4" -I"..\Qt\4. 8.6\include\ActiveQt" -I"build" -I"build" -I"..\Qt\4.8.6\mkspecs\default" -D__GN UC__ -DWIN32 src\qt\rpcconsole.cpp -o build\rpcconsole.moc :/deps/boost_1_57_0/boost/type_traits/detail/has_binary_operator.hp:53: Parse er ror at "BOOST_JOIN" Makefile.Release:742: recipe for target 'build/rpcconsole.moc' failed mingw32-make: *** [build/rpcconsole.moc] Error 1Here is my updated file has_binary_operator.hpp looks like... // (C) Copyright 2009-2011 Frederic Bron, Robert Stewart, Steven Watanabe & Roman Perepelitsa. // // Use, modification and distribution are subject to the Boost Software License, // Version 1.0. (See accompanying file LICENSE_1_0.txt or copy at // http://www.boost.org/LICENSE_1_0.txt). // // See http://www.boost.org/libs/type_traits for most recent version including documentation.
#ifndef Q_MOC_RUN #include <boost/config.hpp> #include <boost/type_traits/ice.hpp> #include <boost/type_traits/integral_constant.hpp> #include <boost/type_traits/is_base_of.hpp> #include <boost/type_traits/is_const.hpp> #include <boost/type_traits/is_convertible.hpp> #include <boost/type_traits/is_fundamental.hpp> #include <boost/type_traits/is_integral.hpp> #include <boost/type_traits/is_pointer.hpp> #include <boost/type_traits/is_same.hpp> #include <boost/type_traits/is_void.hpp> #include <boost/type_traits/remove_cv.hpp> #include <boost/type_traits/remove_pointer.hpp> #include <boost/type_traits/remove_reference.hpp>
// should be the last #include #include <boost/type_traits/detail/bool_trait_def.hpp> #endif Hi bitcoinrulzz, You put the last #endif to a wrong line. Put it at the end of file instead, it should work then. (check again nitrogenetics's answer)
|
|
|
|
|