SellPower-Mark
Member
Offline
Activity: 107
Merit: 10
|
|
November 25, 2015, 10:51:20 PM |
|
hi, I am trying to compile the wallet, I finished to compile the wallet , but, after I finished the compiling QT wallet with QT 4.8.5-mingw and mingw-0.6(GCC-4.8.1), the app just crashed after startup immediately. Anybody knows which QT and mingw could be compatible?? many thanks.
|
﹄﹄﹄﹄﹄▣▣▣ ASICBIT ▣▣▣ ﹄﹄﹄﹄ [ASICB]﹄﹄﹄Next Generation ASIC Scrypt
|
|
|
SellPower-Mark
Member
Offline
Activity: 107
Merit: 10
|
|
November 25, 2015, 11:40:32 PM |
|
hi, I am trying to compile the wallet, I finished to compile the wallet , but, after I finished the compiling QT wallet with QT 4.8.5-mingw and mingw-0.6(GCC-4.8.1), the app just crashed after startup immediately. Anybody knows which QT and mingw could be compatible?? many thanks.
Perl Install , deps folder on C HDD
|
﹄﹄﹄﹄﹄▣▣▣ ASICBIT ▣▣▣ ﹄﹄﹄﹄ [ASICB]﹄﹄﹄Next Generation ASIC Scrypt
|
|
|
SellPower-Mark
Member
Offline
Activity: 107
Merit: 10
|
|
November 26, 2015, 12:06:05 AM |
|
what the best version QT?
|
﹄﹄﹄﹄﹄▣▣▣ ASICBIT ▣▣▣ ﹄﹄﹄﹄ [ASICB]﹄﹄﹄Next Generation ASIC Scrypt
|
|
|
SellPower-Mark
Member
Offline
Activity: 107
Merit: 10
|
|
November 26, 2015, 01:47:40 AM |
|
OK fix , work fine compile fine .
|
﹄﹄﹄﹄﹄▣▣▣ ASICBIT ▣▣▣ ﹄﹄﹄﹄ [ASICB]﹄﹄﹄Next Generation ASIC Scrypt
|
|
|
Fuzzbawls
|
|
November 27, 2015, 08:55:37 AM |
|
I am currently making a coin for use on Windows and this thread is great. Does anyone know of any Wallets or Scripts for Bitcoin written in Powershell? And in case anyone does not know. To open an elevated PowerShell prompt, in the taskbar search, type: powershell. This just means open your files on your computer, then where you see "Computer>Folder>File" replace that with the word "powershell" and it will open a command line which you can use to create apps or run scripts. Powershell is a scripting environment, not a programming language, and is essentially a windows only thing. I doubt you'll ever find any full wallet type "apps" that only use powershell exclusively. You might be able to come up with some basic scripts that piggy back or otherwise tie into a coin's wallet, but again, there are much better alternatives for doing so than powershell
|
|
|
|
moon_sun
Newbie
Offline
Activity: 17
Merit: 0
|
|
November 28, 2015, 06:50:01 PM |
|
Since compiling with windows 7 doesnt work for me I am trying with Windows 10 x64. Now I get new errors while making OpenSSL. After running this command ./Configure no-zlib no-shared no-dso no-krb5 no-camellia no-capieng no-cast no-cms no-dtls1 no-gost no-gmp no-heartbe ats no-idea no-jpake no-md2 no-mdc2 no-rc5 no-rdrand no-rfc3779 no-rsax no-sctp no-seed no-sha0 no-static_engine no-whi rpool no-rc2 no-rc4 no-ssl2 no-ssl3 mingwI get this message Since you've disabled or enabled at least one algorithm, you need to do the following before building: make depend$ ./Configure no-zlib no-shared no-dso no-krb5 no-camellia no-capieng no-cast no-cms no-dtls1 no-gost no-gmp no-heartbe ats no-idea no-jpake no-md2 no-mdc2 no-rc5 no-rdrand no-rfc3779 no-rsax no-sctp no-seed no-sha0 no-static_engine no-whi rpool no-rc2 no-rc4 no-ssl2 no-ssl3 mingw Configuring for mingw no-camellia [option] OPENSSL_NO_CAMELLIA (skip dir) no-capieng [option] OPENSSL_NO_CAPIENG (skip dir) no-cast [option] OPENSSL_NO_CAST (skip dir) no-cms [option] OPENSSL_NO_CMS (skip dir) no-dso [option] no-dtls1 [option] OPENSSL_NO_DTLS1 (skip dir) no-ec_nistp_64_gcc_128 [default] OPENSSL_NO_EC_NISTP_64_GCC_128 (skip dir) no-gmp [option] OPENSSL_NO_GMP (skip dir) no-gost [option] OPENSSL_NO_GOST (skip dir) no-heartbeats [option] OPENSSL_NO_HEARTBEATS (skip dir) no-idea [option] OPENSSL_NO_IDEA (skip dir) no-jpake [experimental] OPENSSL_NO_JPAKE (skip dir) no-krb5 [krb5-flavor not specified] OPENSSL_NO_KRB5 no-md2 [option] OPENSSL_NO_MD2 (skip dir) no-mdc2 [option] OPENSSL_NO_MDC2 (skip dir) no-rc2 [option] OPENSSL_NO_RC2 (skip dir) no-rc4 [option] OPENSSL_NO_RC4 (skip dir) no-rc5 [option] OPENSSL_NO_RC5 (skip dir) no-rdrand [option] OPENSSL_NO_RDRAND (skip dir) no-rfc3779 [option] OPENSSL_NO_RFC3779 (skip dir) no-rsax [option] OPENSSL_NO_RSAX (skip dir) no-sctp [option] OPENSSL_NO_SCTP (skip dir) no-seed [option] OPENSSL_NO_SEED (skip dir) no-sha0 [option] OPENSSL_NO_SHA0 (skip dir) no-shared [option] no-ssl2 [option] OPENSSL_NO_SSL2 (skip dir) no-ssl3 [option] OPENSSL_NO_SSL3 (skip dir) no-static_engine [option] OPENSSL_NO_STATIC_ENGINE (skip dir) no-store [experimental] OPENSSL_NO_STORE (skip dir) no-unit-test [default] OPENSSL_NO_UNIT_TEST (skip dir) no-whirpool [option] OPENSSL_NO_WHIRPOOL (skip dir) no-zlib [option] no-zlib-dynamic [default] IsMK1MF=0 CC =gcc CFLAG =-DOPENSSL_THREADS -D_MT -DL_ENDIAN -DWIN32_LEAN_AND_MEAN -fomit-frame-pointer -O3 -march=i486 -Wall -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM -DVPAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM EX_LIBS =-lws2_32 -lgdi32 -lcrypt32 CPUID_OBJ =x86cpuid.o BN_ASM =bn-586.o co-586.o x86-mont.o x86-gf2m.o DES_ENC =des-586.o crypt586.o AES_ENC =aes-586.o vpaes-x86.o aesni-x86.o BF_ENC =bf-586.o CAST_ENC =cast-586.o RC4_ENC =rc4-586.o RC5_ENC =rc5-586.o MD5_OBJ_ASM =md5-586.o SHA1_OBJ_ASM =sha1-586.o sha256-586.o sha512-586.o RMD160_OBJ_ASM=rmd-586.o CMLL_ENC =cmll-x86.o MODES_OBJ =ghash-x86.o ENGINES_OBJ = PROCESSOR = RANLIB =true ARFLAGS = PERL =/bin/perl.exe THIRTY_TWO_BIT mode DES_PTR used DES_RISC1 used DES_UNROLL used BN_LLONG mode RC4_INDEX mode RC4_CHUNK is undefined e_os2.h => include/openssl/e_os2.h making links in crypto... make[1]: Entering directory `/c/deps/openssl-1.0.1l/crypto' crypto.h => ../include/openssl/crypto.h opensslv.h => ../include/openssl/opensslv.h opensslconf.h => ../include/openssl/opensslconf.h ebcdic.h => ../include/openssl/ebcdic.h symhacks.h => ../include/openssl/symhacks.h ossl_typ.h => ../include/openssl/ossl_typ.h constant_time_test.c => ../test/constant_time_test.c making links in crypto/objects... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/objects' objects.h => ../../include/openssl/objects.h obj_mac.h => ../../include/openssl/obj_mac.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/objects' making links in crypto/md4... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/md4' md4.h => ../../include/openssl/md4.h md4test.c => ../../test/md4test.c md4.c => ../../apps/md4.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/md4' making links in crypto/md5... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/md5' md5.h => ../../include/openssl/md5.h md5test.c => ../../test/md5test.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/md5' making links in crypto/sha... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/sha' sha.h => ../../include/openssl/sha.h shatest.c => ../../test/shatest.c sha1test.c => ../../test/sha1test.c sha256t.c => ../../test/sha256t.c sha512t.c => ../../test/sha512t.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/sha' making links in crypto/hmac... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/hmac' hmac.h => ../../include/openssl/hmac.h hmactest.c => ../../test/hmactest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/hmac' making links in crypto/ripemd... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/ripemd' ripemd.h => ../../include/openssl/ripemd.h rmdtest.c => ../../test/rmdtest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/ripemd' making links in crypto/whrlpool... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/whrlpool' whrlpool.h => ../../include/openssl/whrlpool.h wp_test.c => ../../test/wp_test.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/whrlpool' making links in crypto/des... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/des' des.h => ../../include/openssl/des.h des_old.h => ../../include/openssl/des_old.h destest.c => ../../test/destest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/des' making links in crypto/aes... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/aes' aes.h => ../../include/openssl/aes.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/aes' making links in crypto/bf... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/bf' blowfish.h => ../../include/openssl/blowfish.h bftest.c => ../../test/bftest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/bf' making links in crypto/modes... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/modes' modes.h => ../../include/openssl/modes.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/modes' making links in crypto/bn... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/bn' bn.h => ../../include/openssl/bn.h bntest.c => ../../test/bntest.c exptest.c => ../../test/exptest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/bn' making links in crypto/ec... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/ec' ec.h => ../../include/openssl/ec.h ectest.c => ../../test/ectest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/ec' making links in crypto/rsa... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/rsa' rsa.h => ../../include/openssl/rsa.h rsa_test.c => ../../test/rsa_test.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/rsa' making links in crypto/dsa... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/dsa' dsa.h => ../../include/openssl/dsa.h dsatest.c => ../../test/dsatest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/dsa' making links in crypto/ecdsa... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/ecdsa' ecdsa.h => ../../include/openssl/ecdsa.h ecdsatest.c => ../../test/ecdsatest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/ecdsa' making links in crypto/dh... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/dh' dh.h => ../../include/openssl/dh.h dhtest.c => ../../test/dhtest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/dh' making links in crypto/ecdh... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/ecdh' ecdh.h => ../../include/openssl/ecdh.h ecdhtest.c => ../../test/ecdhtest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/ecdh' making links in crypto/dso... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/dso' dso.h => ../../include/openssl/dso.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/dso' making links in crypto/engine... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/engine' engine.h => ../../include/openssl/engine.h enginetest.c => ../../test/enginetest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/engine' making links in crypto/buffer... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/buffer' buffer.h => ../../include/openssl/buffer.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/buffer' making links in crypto/bio... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/bio' bio.h => ../../include/openssl/bio.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/bio' making links in crypto/stack... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/stack' stack.h => ../../include/openssl/stack.h safestack.h => ../../include/openssl/safestack.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/stack' making links in crypto/lhash... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/lhash' lhash.h => ../../include/openssl/lhash.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/lhash' making links in crypto/rand... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/rand' rand.h => ../../include/openssl/rand.h randtest.c => ../../test/randtest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/rand' making links in crypto/err... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/err' err.h => ../../include/openssl/err.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/err' making links in crypto/evp... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/evp' evp.h => ../../include/openssl/evp.h evp_test.c => ../../test/evp_test.c evptests.txt -> ../../test/evptests.txt make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/evp' making links in crypto/asn1... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/asn1' asn1.h => ../../include/openssl/asn1.h asn1_mac.h => ../../include/openssl/asn1_mac.h asn1t.h => ../../include/openssl/asn1t.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/asn1' making links in crypto/pem... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/pem' pem.h => ../../include/openssl/pem.h pem2.h => ../../include/openssl/pem2.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/pem' making links in crypto/x509... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/x509' x509.h => ../../include/openssl/x509.h x509_vfy.h => ../../include/openssl/x509_vfy.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/x509' making links in crypto/x509v3... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/x509v3' x509v3.h => ../../include/openssl/x509v3.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/x509v3' making links in crypto/conf... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/conf' conf.h => ../../include/openssl/conf.h conf_api.h => ../../include/openssl/conf_api.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/conf' making links in crypto/txt_db... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/txt_db' txt_db.h => ../../include/openssl/txt_db.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/txt_db' making links in crypto/pkcs7... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/pkcs7' pkcs7.h => ../../include/openssl/pkcs7.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/pkcs7' making links in crypto/pkcs12... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/pkcs12' pkcs12.h => ../../include/openssl/pkcs12.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/pkcs12' making links in crypto/comp... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/comp' comp.h => ../../include/openssl/comp.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/comp' making links in crypto/ocsp... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/ocsp' ocsp.h => ../../include/openssl/ocsp.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/ocsp' making links in crypto/ui... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/ui' ui.h => ../../include/openssl/ui.h ui_compat.h => ../../include/openssl/ui_compat.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/ui' making links in crypto/krb5... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/krb5' krb5_asn.h => ../../include/openssl/krb5_asn.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/krb5' making links in crypto/pqueue... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/pqueue' pqueue.h => ../../include/openssl/pqueue.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/pqueue' making links in crypto/ts... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/ts' ts.h => ../../include/openssl/ts.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/ts' making links in crypto/srp... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/srp' srp.h => ../../include/openssl/srp.h srptest.c => ../../test/srptest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/srp' making links in crypto/cmac... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/cmac' cmac.h => ../../include/openssl/cmac.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/cmac' make[1]: Leaving directory `/c/deps/openssl-1.0.1l/crypto' making links in ssl... make[1]: Entering directory `/c/deps/openssl-1.0.1l/ssl' ssl.h => ../include/openssl/ssl.h ssl2.h => ../include/openssl/ssl2.h ssl3.h => ../include/openssl/ssl3.h ssl23.h => ../include/openssl/ssl23.h tls1.h => ../include/openssl/tls1.h dtls1.h => ../include/openssl/dtls1.h kssl.h => ../include/openssl/kssl.h srtp.h => ../include/openssl/srtp.h ssltest.c => ../test/ssltest.c heartbeat_test.c => ../test/heartbeat_test.c make[1]: Leaving directory `/c/deps/openssl-1.0.1l/ssl' making links in engines... make[1]: Entering directory `/c/deps/openssl-1.0.1l/engines' make[1]: Leaving directory `/c/deps/openssl-1.0.1l/engines' making links in apps... make[1]: Entering directory `/c/deps/openssl-1.0.1l/apps' make[1]: Nothing to be done for `links'. make[1]: Leaving directory `/c/deps/openssl-1.0.1l/apps' making links in test... make[1]: Entering directory `/c/deps/openssl-1.0.1l/test' make[1]: Nothing to be done for `links'. make[1]: Leaving directory `/c/deps/openssl-1.0.1l/test' making links in tools... make[1]: Entering directory `/c/deps/openssl-1.0.1l/tools' make[1]: Nothing to be done for `links'. make[1]: Leaving directory `/c/deps/openssl-1.0.1l/tools' generating dummy tests (if needed)... make[1]: Entering directory `/c/deps/openssl-1.0.1l/test' make[1]: Nothing to be done for `generate'. make[1]: Leaving directory `/c/deps/openssl-1.0.1l/test' Since you've disabled or enabled at least one algorithm, you need to do the following before building: make depend Configured for mingw. I do make depend and get this error $ make depend making depend in crypto... make[1]: Entering directory `/c/deps/openssl-1.0.1l/crypto' ../util/domd: line 25: gcc: command not found make[1]: *** [depend] Error 1 make[1]: Leaving directory `/c/deps/openssl-1.0.1l/crypto' make: *** [depend] Error 1 If I try to make anyway I get this error $ make making all in crypto... make[1]: Entering directory `/c/deps/openssl-1.0.1l/crypto' gcc -I. -I.. -I../include -DOPENSSL_THREADS -D_MT -DL_ENDIAN -DWIN32_LEAN_AND_MEAN -fomit-frame-pointer -O3 -march=i486 -Wall -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM -DVPAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM -c -o cryptlib.o cryptlib.c make[1]: gcc: Command not found make[1]: *** [cryptlib.o] Error 127 make[1]: Leaving directory `/c/deps/openssl-1.0.1l/crypto' make: *** [build_crypto] Error 1 What to do? Please help!
|
|
|
|
old c coder
|
|
December 01, 2015, 05:11:53 PM |
|
Since compiling with windows 7 doesnt work for me I am trying with Windows 10 x64. Now I get new errors while making OpenSSL. After running this command ./Configure no-zlib no-shared no-dso no-krb5 no-camellia no-capieng no-cast no-cms no-dtls1 no-gost no-gmp no-heartbe ats no-idea no-jpake no-md2 no-mdc2 no-rc5 no-rdrand no-rfc3779 no-rsax no-sctp no-seed no-sha0 no-static_engine no-whi rpool no-rc2 no-rc4 no-ssl2 no-ssl3 mingwI get this message Since you've disabled or enabled at least one algorithm, you need to do the following before building: make depend$ ./Configure no-zlib no-shared no-dso no-krb5 no-camellia no-capieng no-cast no-cms no-dtls1 no-gost no-gmp no-heartbe ats no-idea no-jpake no-md2 no-mdc2 no-rc5 no-rdrand no-rfc3779 no-rsax no-sctp no-seed no-sha0 no-static_engine no-whi rpool no-rc2 no-rc4 no-ssl2 no-ssl3 mingw Configuring for mingw no-camellia [option] OPENSSL_NO_CAMELLIA (skip dir) no-capieng [option] OPENSSL_NO_CAPIENG (skip dir) no-cast [option] OPENSSL_NO_CAST (skip dir) no-cms [option] OPENSSL_NO_CMS (skip dir) no-dso [option] no-dtls1 [option] OPENSSL_NO_DTLS1 (skip dir) no-ec_nistp_64_gcc_128 [default] OPENSSL_NO_EC_NISTP_64_GCC_128 (skip dir) no-gmp [option] OPENSSL_NO_GMP (skip dir) no-gost [option] OPENSSL_NO_GOST (skip dir) no-heartbeats [option] OPENSSL_NO_HEARTBEATS (skip dir) no-idea [option] OPENSSL_NO_IDEA (skip dir) no-jpake [experimental] OPENSSL_NO_JPAKE (skip dir) no-krb5 [krb5-flavor not specified] OPENSSL_NO_KRB5 no-md2 [option] OPENSSL_NO_MD2 (skip dir) no-mdc2 [option] OPENSSL_NO_MDC2 (skip dir) no-rc2 [option] OPENSSL_NO_RC2 (skip dir) no-rc4 [option] OPENSSL_NO_RC4 (skip dir) no-rc5 [option] OPENSSL_NO_RC5 (skip dir) no-rdrand [option] OPENSSL_NO_RDRAND (skip dir) no-rfc3779 [option] OPENSSL_NO_RFC3779 (skip dir) no-rsax [option] OPENSSL_NO_RSAX (skip dir) no-sctp [option] OPENSSL_NO_SCTP (skip dir) no-seed [option] OPENSSL_NO_SEED (skip dir) no-sha0 [option] OPENSSL_NO_SHA0 (skip dir) no-shared [option] no-ssl2 [option] OPENSSL_NO_SSL2 (skip dir) no-ssl3 [option] OPENSSL_NO_SSL3 (skip dir) no-static_engine [option] OPENSSL_NO_STATIC_ENGINE (skip dir) no-store [experimental] OPENSSL_NO_STORE (skip dir) no-unit-test [default] OPENSSL_NO_UNIT_TEST (skip dir) no-whirpool [option] OPENSSL_NO_WHIRPOOL (skip dir) no-zlib [option] no-zlib-dynamic [default] IsMK1MF=0 CC =gcc CFLAG =-DOPENSSL_THREADS -D_MT -DL_ENDIAN -DWIN32_LEAN_AND_MEAN -fomit-frame-pointer -O3 -march=i486 -Wall -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM -DVPAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM EX_LIBS =-lws2_32 -lgdi32 -lcrypt32 CPUID_OBJ =x86cpuid.o BN_ASM =bn-586.o co-586.o x86-mont.o x86-gf2m.o DES_ENC =des-586.o crypt586.o AES_ENC =aes-586.o vpaes-x86.o aesni-x86.o BF_ENC =bf-586.o CAST_ENC =cast-586.o RC4_ENC =rc4-586.o RC5_ENC =rc5-586.o MD5_OBJ_ASM =md5-586.o SHA1_OBJ_ASM =sha1-586.o sha256-586.o sha512-586.o RMD160_OBJ_ASM=rmd-586.o CMLL_ENC =cmll-x86.o MODES_OBJ =ghash-x86.o ENGINES_OBJ = PROCESSOR = RANLIB =true ARFLAGS = PERL =/bin/perl.exe THIRTY_TWO_BIT mode DES_PTR used DES_RISC1 used DES_UNROLL used BN_LLONG mode RC4_INDEX mode RC4_CHUNK is undefined e_os2.h => include/openssl/e_os2.h making links in crypto... make[1]: Entering directory `/c/deps/openssl-1.0.1l/crypto' crypto.h => ../include/openssl/crypto.h opensslv.h => ../include/openssl/opensslv.h opensslconf.h => ../include/openssl/opensslconf.h ebcdic.h => ../include/openssl/ebcdic.h symhacks.h => ../include/openssl/symhacks.h ossl_typ.h => ../include/openssl/ossl_typ.h constant_time_test.c => ../test/constant_time_test.c making links in crypto/objects... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/objects' objects.h => ../../include/openssl/objects.h obj_mac.h => ../../include/openssl/obj_mac.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/objects' making links in crypto/md4... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/md4' md4.h => ../../include/openssl/md4.h md4test.c => ../../test/md4test.c md4.c => ../../apps/md4.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/md4' making links in crypto/md5... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/md5' md5.h => ../../include/openssl/md5.h md5test.c => ../../test/md5test.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/md5' making links in crypto/sha... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/sha' sha.h => ../../include/openssl/sha.h shatest.c => ../../test/shatest.c sha1test.c => ../../test/sha1test.c sha256t.c => ../../test/sha256t.c sha512t.c => ../../test/sha512t.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/sha' making links in crypto/hmac... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/hmac' hmac.h => ../../include/openssl/hmac.h hmactest.c => ../../test/hmactest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/hmac' making links in crypto/ripemd... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/ripemd' ripemd.h => ../../include/openssl/ripemd.h rmdtest.c => ../../test/rmdtest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/ripemd' making links in crypto/whrlpool... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/whrlpool' whrlpool.h => ../../include/openssl/whrlpool.h wp_test.c => ../../test/wp_test.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/whrlpool' making links in crypto/des... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/des' des.h => ../../include/openssl/des.h des_old.h => ../../include/openssl/des_old.h destest.c => ../../test/destest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/des' making links in crypto/aes... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/aes' aes.h => ../../include/openssl/aes.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/aes' making links in crypto/bf... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/bf' blowfish.h => ../../include/openssl/blowfish.h bftest.c => ../../test/bftest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/bf' making links in crypto/modes... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/modes' modes.h => ../../include/openssl/modes.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/modes' making links in crypto/bn... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/bn' bn.h => ../../include/openssl/bn.h bntest.c => ../../test/bntest.c exptest.c => ../../test/exptest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/bn' making links in crypto/ec... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/ec' ec.h => ../../include/openssl/ec.h ectest.c => ../../test/ectest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/ec' making links in crypto/rsa... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/rsa' rsa.h => ../../include/openssl/rsa.h rsa_test.c => ../../test/rsa_test.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/rsa' making links in crypto/dsa... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/dsa' dsa.h => ../../include/openssl/dsa.h dsatest.c => ../../test/dsatest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/dsa' making links in crypto/ecdsa... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/ecdsa' ecdsa.h => ../../include/openssl/ecdsa.h ecdsatest.c => ../../test/ecdsatest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/ecdsa' making links in crypto/dh... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/dh' dh.h => ../../include/openssl/dh.h dhtest.c => ../../test/dhtest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/dh' making links in crypto/ecdh... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/ecdh' ecdh.h => ../../include/openssl/ecdh.h ecdhtest.c => ../../test/ecdhtest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/ecdh' making links in crypto/dso... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/dso' dso.h => ../../include/openssl/dso.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/dso' making links in crypto/engine... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/engine' engine.h => ../../include/openssl/engine.h enginetest.c => ../../test/enginetest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/engine' making links in crypto/buffer... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/buffer' buffer.h => ../../include/openssl/buffer.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/buffer' making links in crypto/bio... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/bio' bio.h => ../../include/openssl/bio.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/bio' making links in crypto/stack... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/stack' stack.h => ../../include/openssl/stack.h safestack.h => ../../include/openssl/safestack.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/stack' making links in crypto/lhash... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/lhash' lhash.h => ../../include/openssl/lhash.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/lhash' making links in crypto/rand... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/rand' rand.h => ../../include/openssl/rand.h randtest.c => ../../test/randtest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/rand' making links in crypto/err... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/err' err.h => ../../include/openssl/err.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/err' making links in crypto/evp... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/evp' evp.h => ../../include/openssl/evp.h evp_test.c => ../../test/evp_test.c evptests.txt -> ../../test/evptests.txt make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/evp' making links in crypto/asn1... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/asn1' asn1.h => ../../include/openssl/asn1.h asn1_mac.h => ../../include/openssl/asn1_mac.h asn1t.h => ../../include/openssl/asn1t.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/asn1' making links in crypto/pem... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/pem' pem.h => ../../include/openssl/pem.h pem2.h => ../../include/openssl/pem2.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/pem' making links in crypto/x509... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/x509' x509.h => ../../include/openssl/x509.h x509_vfy.h => ../../include/openssl/x509_vfy.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/x509' making links in crypto/x509v3... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/x509v3' x509v3.h => ../../include/openssl/x509v3.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/x509v3' making links in crypto/conf... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/conf' conf.h => ../../include/openssl/conf.h conf_api.h => ../../include/openssl/conf_api.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/conf' making links in crypto/txt_db... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/txt_db' txt_db.h => ../../include/openssl/txt_db.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/txt_db' making links in crypto/pkcs7... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/pkcs7' pkcs7.h => ../../include/openssl/pkcs7.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/pkcs7' making links in crypto/pkcs12... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/pkcs12' pkcs12.h => ../../include/openssl/pkcs12.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/pkcs12' making links in crypto/comp... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/comp' comp.h => ../../include/openssl/comp.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/comp' making links in crypto/ocsp... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/ocsp' ocsp.h => ../../include/openssl/ocsp.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/ocsp' making links in crypto/ui... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/ui' ui.h => ../../include/openssl/ui.h ui_compat.h => ../../include/openssl/ui_compat.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/ui' making links in crypto/krb5... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/krb5' krb5_asn.h => ../../include/openssl/krb5_asn.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/krb5' making links in crypto/pqueue... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/pqueue' pqueue.h => ../../include/openssl/pqueue.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/pqueue' making links in crypto/ts... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/ts' ts.h => ../../include/openssl/ts.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/ts' making links in crypto/srp... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/srp' srp.h => ../../include/openssl/srp.h srptest.c => ../../test/srptest.c make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/srp' making links in crypto/cmac... make[2]: Entering directory `/c/deps/openssl-1.0.1l/crypto/cmac' cmac.h => ../../include/openssl/cmac.h make[2]: Leaving directory `/c/deps/openssl-1.0.1l/crypto/cmac' make[1]: Leaving directory `/c/deps/openssl-1.0.1l/crypto' making links in ssl... make[1]: Entering directory `/c/deps/openssl-1.0.1l/ssl' ssl.h => ../include/openssl/ssl.h ssl2.h => ../include/openssl/ssl2.h ssl3.h => ../include/openssl/ssl3.h ssl23.h => ../include/openssl/ssl23.h tls1.h => ../include/openssl/tls1.h dtls1.h => ../include/openssl/dtls1.h kssl.h => ../include/openssl/kssl.h srtp.h => ../include/openssl/srtp.h ssltest.c => ../test/ssltest.c heartbeat_test.c => ../test/heartbeat_test.c make[1]: Leaving directory `/c/deps/openssl-1.0.1l/ssl' making links in engines... make[1]: Entering directory `/c/deps/openssl-1.0.1l/engines' make[1]: Leaving directory `/c/deps/openssl-1.0.1l/engines' making links in apps... make[1]: Entering directory `/c/deps/openssl-1.0.1l/apps' make[1]: Nothing to be done for `links'. make[1]: Leaving directory `/c/deps/openssl-1.0.1l/apps' making links in test... make[1]: Entering directory `/c/deps/openssl-1.0.1l/test' make[1]: Nothing to be done for `links'. make[1]: Leaving directory `/c/deps/openssl-1.0.1l/test' making links in tools... make[1]: Entering directory `/c/deps/openssl-1.0.1l/tools' make[1]: Nothing to be done for `links'. make[1]: Leaving directory `/c/deps/openssl-1.0.1l/tools' generating dummy tests (if needed)... make[1]: Entering directory `/c/deps/openssl-1.0.1l/test' make[1]: Nothing to be done for `generate'. make[1]: Leaving directory `/c/deps/openssl-1.0.1l/test' Since you've disabled or enabled at least one algorithm, you need to do the following before building: make depend Configured for mingw. I do make depend and get this error $ make depend making depend in crypto... make[1]: Entering directory `/c/deps/openssl-1.0.1l/crypto' ../util/domd: line 25: gcc: command not found make[1]: *** [depend] Error 1 make[1]: Leaving directory `/c/deps/openssl-1.0.1l/crypto' make: *** [depend] Error 1 If I try to make anyway I get this error $ make making all in crypto... make[1]: Entering directory `/c/deps/openssl-1.0.1l/crypto' gcc -I. -I.. -I../include -DOPENSSL_THREADS -D_MT -DL_ENDIAN -DWIN32_LEAN_AND_MEAN -fomit-frame-pointer -O3 -march=i486 -Wall -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM -DVPAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM -c -o cryptlib.o cryptlib.c make[1]: gcc: Command not found make[1]: *** [cryptlib.o] Error 127 make[1]: Leaving directory `/c/deps/openssl-1.0.1l/crypto' make: *** [build_crypto] Error 1 What to do? Please help! Hello moon_sun? This seems very much the same as message #1070, https://bitcointalk.org/index.php?topic=149479.msg12713793#msg12713793 Just replace BerkeleyDB include (&/or library) with gcc, and especially step 2.2 with especially step 1.3 Let us know if this helps, or hurts Ron
|
LTC: LUYiMVsrFQewUSPDasSKGzhyTPAkiTeSov BTC: 1DPvP6WoZzaNQ9Nxzd64hjYad1kyQzTTbx YAC: Y3ZggXDvnRJaRwtVGyGJwt6DMLN3EPQpQf The day is coming when a single carrot, freshly observed, will set off a revolution. Paul Cezanne
|
|
|
Nightz
|
|
December 01, 2015, 05:48:59 PM Last edit: December 02, 2015, 08:27:52 PM by Nightz |
|
When OpenSSL would not build for me using those commands I try'd my own
I used the following
./configure no-zlib no-shared no-dso no-asm mingw
and it built first time with 0 problems.
My two cents
|
|
|
|
moon_sun
Newbie
Offline
Activity: 17
Merit: 0
|
|
December 03, 2015, 10:26:27 PM |
|
You were right! PATH had a typo: C.\mingw32\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\ instead of C:\mingw32\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\ When OpenSSL would not build for me using those commands I try'd my own
I used the following
./configure no-zlib no-shared no-dso no-asm mingw
and it built first time with 0 problems.
My two cents
This command worked thank you! Everything went well except the final step. I did everything but the final command: cd /c/bitcoin-0.9.4
./autogen.sh
CPPFLAGS="-I/c/deps/db-4.8.30.NC/build_unix \ -I/c/deps/openssl-1.0.1l/include \ -I/c/deps \ -I/c/deps/protobuf-2.6.1/src \ -I/c/deps/libpng-1.6.16 \ -I/c/deps/qrencode-3.4.4" \ LDFLAGS="-L/c/deps/db-4.8.30.NC/build_unix \ -L/c/deps/openssl-1.0.1l \ -L/c/deps/miniupnpc \ -L/c/deps/protobuf-2.6.1/src/.libs \ -L/c/deps/libpng-1.6.16/.libs \ -L/c/deps/qrencode-3.4.4/.libs" \ BOOST_ROOT=/c/deps/boost_1_57_0 \ ./configure \ --disable-upnp-default \ --disable-tests \ --with-qt-incdir=/c/Qt/5.3.2/include \ --with-qt-libdir=/c/Qt/5.3.2/lib \ --with-qt-plugindir=/c/Qt/5.3.2/plugins \ --with-qt-bindir=/c/Qt/5.3.2/bin \ --with-protoc-bindir=/c/deps/protobuf-2.6.1/src
make
strip src/bitcoin-cli.exe strip src/bitcoind.exe strip src/qt/bitcoin-qt.exe strip src/qt/bitcoin-qt.exe returns 'src/qt/bitcoin-qt.exe': no such file, I tried to search inside bitcoin folder for this "bitcoin-qt" file but there's nothing! What can I do? I want to compile a full working wallet from the source! Thanks for helping very appreciated!
|
|
|
|
old c coder
|
|
December 04, 2015, 04:53:28 AM |
|
You were right! PATH had a typo: C.\mingw32\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\ instead of C:\mingw32\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\ When OpenSSL would not build for me using those commands I try'd my own
I used the following
./configure no-zlib no-shared no-dso no-asm mingw
and it built first time with 0 problems.
My two cents
This command worked thank you! Everything went well except the final step. I did everything but the final command: cd /c/bitcoin-0.9.4
./autogen.sh
CPPFLAGS="-I/c/deps/db-4.8.30.NC/build_unix \ -I/c/deps/openssl-1.0.1l/include \ -I/c/deps \ -I/c/deps/protobuf-2.6.1/src \ -I/c/deps/libpng-1.6.16 \ -I/c/deps/qrencode-3.4.4" \ LDFLAGS="-L/c/deps/db-4.8.30.NC/build_unix \ -L/c/deps/openssl-1.0.1l \ -L/c/deps/miniupnpc \ -L/c/deps/protobuf-2.6.1/src/.libs \ -L/c/deps/libpng-1.6.16/.libs \ -L/c/deps/qrencode-3.4.4/.libs" \ BOOST_ROOT=/c/deps/boost_1_57_0 \ ./configure \ --disable-upnp-default \ --disable-tests \ --with-qt-incdir=/c/Qt/5.3.2/include \ --with-qt-libdir=/c/Qt/5.3.2/lib \ --with-qt-plugindir=/c/Qt/5.3.2/plugins \ --with-qt-bindir=/c/Qt/5.3.2/bin \ --with-protoc-bindir=/c/deps/protobuf-2.6.1/src
make
strip src/bitcoin-cli.exe strip src/bitcoind.exe strip src/qt/bitcoin-qt.exe strip src/qt/bitcoin-qt.exe returns 'src/qt/bitcoin-qt.exe': no such file, I tried to search inside bitcoin folder for this "bitcoin-qt" file but there's nothing! What can I do? I want to compile a full working wallet from the source! Thanks for helping very appreciated! Hello moon_sun, Traditionally, the bitcoin-qt.exe is in the release or debug directory, not the src/qt directory? Now this may have changed, but check there to see if you have a bitcoin-qt.exe (or let windows search for it ) Scripts, a.k.a. batch files are pretty dumb. You have to be smarter. Unless you take the effort to put "smarts", error checking, etc. into the script file, but then (he said sarcastically) that would take work Let us know what you find... Ron
|
LTC: LUYiMVsrFQewUSPDasSKGzhyTPAkiTeSov BTC: 1DPvP6WoZzaNQ9Nxzd64hjYad1kyQzTTbx YAC: Y3ZggXDvnRJaRwtVGyGJwt6DMLN3EPQpQf The day is coming when a single carrot, freshly observed, will set off a revolution. Paul Cezanne
|
|
|
moon_sun
Newbie
Offline
Activity: 17
Merit: 0
|
|
December 05, 2015, 01:47:27 AM |
|
Hello moon_sun, Traditionally, the bitcoin-qt.exe is in the release or debug directory, not the src/qt directory? Now this may have changed, but check there to see if you have a bitcoin-qt.exe (or let windows search for it ) Scripts, a.k.a. batch files are pretty dumb. You have to be smarter. Unless you take the effort to put "smarts", error checking, etc. into the script file, but then (he said sarcastically) that would take work Let us know what you find... Ron I searched inside bitcoin 0.9.4 folder with no luck, there's no bitcoin-qt file! Actually I don't have any release or debug directory. Am i missing something? I know I'm totally newbie, could you guide me through the correct procedure?
|
|
|
|
moon_sun
Newbie
Offline
Activity: 17
Merit: 0
|
|
December 10, 2015, 10:17:05 PM |
|
Hello moon_sun, Traditionally, the bitcoin-qt.exe is in the release or debug directory, not the src/qt directory? Now this may have changed, but check there to see if you have a bitcoin-qt.exe (or let windows search for it ) Scripts, a.k.a. batch files are pretty dumb. You have to be smarter. Unless you take the effort to put "smarts", error checking, etc. into the script file, but then (he said sarcastically) that would take work Let us know what you find... Ron I searched inside bitcoin 0.9.4 folder with no luck, there's no bitcoin-qt file! Actually I don't have any release or debug directory. Am i missing something? I know I'm totally newbie, could you guide me through the correct procedure? Bumping my help request!
|
|
|
|
old c coder
|
|
December 10, 2015, 11:18:36 PM |
|
Hello moon_sun, Traditionally, the bitcoin-qt.exe is in the release or debug directory, not the src/qt directory? Now this may have changed, but check there to see if you have a bitcoin-qt.exe (or let windows search for it ) Scripts, a.k.a. batch files are pretty dumb. You have to be smarter. Unless you take the effort to put "smarts", error checking, etc. into the script file, but then (he said sarcastically) that would take work Let us know what you find... Ron I searched inside bitcoin 0.9.4 folder with no luck, there's no bitcoin-qt file! Actually I don't have any release or debug directory. Am i missing something? I know I'm totally newbie, could you guide me through the correct procedure? Bumping my help request! Hello moon_sun, First, did the build create a daemon (bitcoind.exe) and not a bitcoin-qt.exe? Or did it build neither? If the former, then perhaps there is some problem in your Qt installation? In which case, perhaps step 2.7 of message #1 might help? Let us know whether you have a daemon (& it works) or not. That can eliminate a lot of possibilities. Ron
|
LTC: LUYiMVsrFQewUSPDasSKGzhyTPAkiTeSov BTC: 1DPvP6WoZzaNQ9Nxzd64hjYad1kyQzTTbx YAC: Y3ZggXDvnRJaRwtVGyGJwt6DMLN3EPQpQf The day is coming when a single carrot, freshly observed, will set off a revolution. Paul Cezanne
|
|
|
moon_sun
Newbie
Offline
Activity: 17
Merit: 0
|
|
December 13, 2015, 12:20:57 AM |
|
Hello moon_sun,
First, did the build create a daemon (bitcoind.exe) and not a bitcoin-qt.exe? Or did it build neither?
If the former, then perhaps there is some problem in your Qt installation? In which case, perhaps step 2.7 of message #1 might help?
Let us know whether you have a daemon (& it works) or not. That can eliminate a lot of possibilities.
Ron
Hello old c coder, yes the build created bitcoind.exe and bitcoin-cli.exe in src folder - but not bitcoin-qt.exe! I had no errors at step 2.7 as far as I know. Any procedure to verify? Many thanks for helping!
|
|
|
|
old c coder
|
|
December 13, 2015, 08:34:58 PM |
|
Hello moon_sun,
First, did the build create a daemon (bitcoind.exe) and not a bitcoin-qt.exe? Or did it build neither?
If the former, then perhaps there is some problem in your Qt installation? In which case, perhaps step 2.7 of message #1 might help?
Let us know whether you have a daemon (& it works) or not. That can eliminate a lot of possibilities.
Ron
Hello old c coder, yes the build created bitcoind.exe and bitcoin-cli.exe in src folder - but not bitcoin-qt.exe! I had no errors at step 2.7 as far as I know. Any procedure to verify? Many thanks for helping! Hello moon_sun, Depending upon which version of Windows you are using, you would do this perhaps slightly differently, but the idea is the same. A good guess is that when you do 2.7: 2.7 Qt 5 libraries: Qt must be configured with ssl and zlib support. Download and unpack Qt base and tools sources: http://download.qt-project.org/official_releases/qt/5.3/5.3.2/submodules/qtbase-opensource-src-5.3.2.7zhttp://download.qt-project.org/official_releases/qt/5.3/5.3.2/submodules/qttools-opensource-src-5.3.2.7zThen from a windows command prompt (note that the following assumes qtbase has been unpacked to C:\Qt\5.3.2 and qttools have been unpacked to C:\Qt\qttools-opensource-src-5.3.2): set INCLUDE=C:\deps\libpng-1.6.16;C:\deps\openssl-1.0.1l\include set LIB=C:\deps\libpng-1.6.16\.libs;C:\deps\openssl-1.0.1l
cd C:\Qt\5.3.2 configure.bat -release -opensource -confirm-license -static -make libs -no-sql-sqlite -no-opengl -system-zlib -qt-pcre -no-icu -no-gif -system-libpng -no-libjpeg -no-freetype -no-angle -no-vcproj -openssl -no-dbus -no-audio-backend -no-wmf-backend -no-qml-debug
mingw32-make
set PATH=%PATH%;C:\Qt\5.3.2\bin Note: consider using -j switch with mingw32-make to speed up compilation process. On a quad core -j4 or -j5 should give the best results. Note all the set xxxx=yyyy stuff. There are 3 of them, and the first two: set INCLUDE=... set LIB=... are used by Qt to "make" itself. But the last one: set PATH=%PATH%;... will be used later when you try to create your bitcoin-qt.exe. The trick is: are those environment variables, INCLUDE, LIB and especially PATH still there tomorrow after you turn off your machine and restart it later? In Windows, usually, if you want those environment variables to "stick" and be available to various users too, one would do something like (here is where it is Windows version specific) this for Windows 8.1: start button -> system -> Advanced system settings -> Environment Variables -> System Variables -> hilite PATH and click the Edit... button! If you change the path there, it will "stick" between reboots and be available to all users. I'm guessing that your problem is something like that? Let us know what you find. Ron
|
LTC: LUYiMVsrFQewUSPDasSKGzhyTPAkiTeSov BTC: 1DPvP6WoZzaNQ9Nxzd64hjYad1kyQzTTbx YAC: Y3ZggXDvnRJaRwtVGyGJwt6DMLN3EPQpQf The day is coming when a single carrot, freshly observed, will set off a revolution. Paul Cezanne
|
|
|
moon_sun
Newbie
Offline
Activity: 17
Merit: 0
|
|
December 15, 2015, 10:09:04 PM |
|
Thanks for your answer, old c coder! My PATH is now set like this C:\mingw32\bin;C:\Qt\5.3.2\bin\;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\ I deleted Qt and bitcoin source folders, then repeated steps 2.7 and 3, but I still get from strip src/qt/bitcoin-qt.exe the error 'src/qt/bitcoin-qt.exe': no such fileWhat to do now? I attach the code, maybe it helps? PC@DESKTOP-T88HSRK ~ $ cd /c/bitcoin-0.9.4
PC@DESKTOP-T88HSRK /c/bitcoin-0.9.4 $ ./autogen.sh configure.ac:12: installing `src/build-aux/config.guess' configure.ac:12: installing `src/build-aux/config.sub' configure.ac:37: installing `src/build-aux/install-sh' configure.ac:37: installing `src/build-aux/missing' src/Makefile.am: installing `src/build-aux/depcomp'
PC@DESKTOP-T88HSRK /c/bitcoin-0.9.4 $ CPPFLAGS="-I/c/deps/db-4.8.30.NC/build_unix \ > -I/c/deps/openssl-1.0.1l/include \ > -I/c/deps \ > -I/c/deps/protobuf-2.6.1/src \ > -I/c/deps/libpng-1.6.16 \ > -I/c/deps/qrencode-3.4.4" \ > LDFLAGS="-L/c/deps/db-4.8.30.NC/build_unix \ > -L/c/deps/openssl-1.0.1l \ > -L/c/deps/miniupnpc \ > -L/c/deps/protobuf-2.6.1/src/.libs \ > -L/c/deps/libpng-1.6.16/.libs \ > -L/c/deps/qrencode-3.4.4/.libs" \ > BOOST_ROOT=/c/deps/boost_1_57_0 \ > ./configure \ > --disable-upnp-default \ > --disable-tests \ > --with-qt-incdir=/c/Qt/5.3.2/include \ > --with-qt-libdir=/c/Qt/5.3.2/lib \ > --with-qt-plugindir=/c/Qt/5.3.2/plugins \ > --with-qt-bindir=/c/Qt/5.3.2/bin \ > --with-protoc-bindir=/c/deps/protobuf-2.6.1/src checking build system type... i686-pc-mingw32 checking host system type... i686-pc-mingw32 checking for a BSD-compatible install... /bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to disable maintainer-specific portions of Makefiles... yes checking for g++... g++ checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.exe checking for suffix of executables... .exe checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for style of include used by make... GNU checking dependency style of g++... gcc3 checking for gcc... gcc checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking how to run the C++ preprocessor... g++ -E checking for gcc... gcc checking whether we are using the GNU Objective C compiler... yes checking whether gcc accepts -g... yes checking dependency style of gcc... gcc3 checking whether ln -s works... no, using cp -p checking for g++... g++ checking whether we are using the GNU Objective C++ compiler... yes checking whether g++ accepts -g... yes checking for a sed that does not truncate output... /bin/sed checking for ar... /c/mingw32/bin/ar checking for ranlib... /c/mingw32/bin/ranlib checking for strip... /c/mingw32/bin/strip checking for gcov... /c/mingw32/bin/gcov checking for lcov... no checking for java... no checking for genhtml... no checking for git... no checking for ccache... no checking for xgettext... no checking for hexdump... no checking for pkg-config... no checking for main in -lmingwthrd... yes checking for main in -lkernel32... yes checking for main in -luser32... yes checking for main in -lgdi32... yes checking for main in -lcomdlg32... yes checking for main in -lwinspool... yes checking for main in -lwinmm... yes checking for main in -lshell32... yes checking for main in -lcomctl32... yes checking for main in -lole32... yes checking for main in -loleaut32... yes checking for main in -luuid... yes checking for main in -lrpcrt4... yes checking for main in -ladvapi32... yes checking for main in -lws2_32... yes checking for main in -lmswsock... yes checking for main in -lshlwapi... yes checking for main in -liphlpapi... yes checking for main in -lcrypt32... yes checking whether the linker accepts -static... yes checking whether the linker accepts -static-libgcc... yes checking whether the linker accepts -static-libstdc++... yes checking for makensis... none configure: WARNING: "makensis not found. Cannot create installer." checking for windres... /c/mingw32/bin/windres checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking whether byte ordering is bigendian... no checking if compiler needs -Werror to reject unknown flags... no checking for the pthreads library -lpthreads... no checking whether pthreads work without any flags... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking if more special flags are required for pthreads... no checking for PTHREAD_PRIO_INHERIT... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... 64 checking whether strerror_r is declared... no checking for strerror_r... no checking whether strerror_r returns char *... no checking whether the linker accepts -Wl,--large-address-aware... yes checking whether C++ compiler accepts -Wstack-protector... yes checking whether C++ compiler accepts -fstack-protector-all... yes checking whether C++ compiler accepts -fPIE... yes checking whether C++ preprocessor accepts -D_FORTIFY_SOURCE=2... yes checking whether C++ preprocessor accepts -U_FORTIFY_SOURCE... yes checking whether the linker accepts -Wl,--dynamicbase... yes checking whether the linker accepts -Wl,--nxcompat... yes checking whether the linker accepts -Wl,-z,relro... no checking whether the linker accepts -Wl,-z,now... no checking stdio.h usability... yes checking stdio.h presence... yes checking for stdio.h... yes checking for stdlib.h... (cached) yes checking for unistd.h... (cached) yes checking for strings.h... (cached) yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for MSG_NOSIGNAL... no checking for Berkeley DB C++ headers... default checking for main in -ldb_cxx-4.8... yes checking miniupnpc/miniwget.h usability... yes checking miniupnpc/miniwget.h presence... yes checking for miniupnpc/miniwget.h... yes checking for main in -lminiupnpc... yes checking miniupnpc/miniupnpc.h usability... yes checking miniupnpc/miniupnpc.h presence... yes checking for miniupnpc/miniupnpc.h... yes checking for main in -lminiupnpc... (cached) yes checking miniupnpc/upnpcommands.h usability... yes checking miniupnpc/upnpcommands.h presence... yes checking for miniupnpc/upnpcommands.h... yes checking for main in -lminiupnpc... (cached) yes checking miniupnpc/upnperrors.h usability... yes checking miniupnpc/upnperrors.h presence... yes checking for miniupnpc/upnperrors.h... yes checking for main in -lminiupnpc... (cached) yes checking for boostlib >= 1.20.0... configure: We will use a staged boost library from /c/deps/boost_1_57_0 yes checking whether the Boost::System library is available... yes checking for exit in -lboost_system-mgw49-mt-s-1_57... yes checking whether the Boost::Filesystem library is available... yes checking for exit in -lboost_filesystem-mgw49-mt-s-1_57... yes checking whether the Boost::Program_Options library is available... yes checking for exit in -lboost_program_options-mgw49-mt-s-1_57... yes checking whether the Boost::Thread library is available... yes checking for exit in -lboost_thread-mgw49-mt-s-1_57... yes checking whether the Boost::Chrono library is available... yes checking for exit in -lboost_chrono-mgw49-mt-s-1_57... yes checking openssl/crypto.h usability... yes checking openssl/crypto.h presence... yes checking for openssl/crypto.h... yes checking for main in -lcrypto... yes checking openssl/ssl.h usability... yes checking openssl/ssl.h presence... yes checking for openssl/ssl.h... yes checking for main in -lssl... yes checking for main in -lprotobuf ... no configure: WARNING: libprotobuf not found; bitcoin-qt frontend will not be built checking whether to build bitcoind... yes checking whether to build bitcoin-cli... yes checking whether to build Bitcoin Core GUI... no (Qt) checking if ccache should be used... no checking if wallet should be enabled... yes checking whether to build with support for UPnP... yes checking whether to build with UPnP enabled by default... no checking whether to build test_bitcoin... no configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating src/test/Makefile config.status: creating src/qt/Makefile config.status: creating src/qt/test/Makefile config.status: creating share/setup.nsi config.status: creating share/qt/Info.plist config.status: creating qa/pull-tester/run-bitcoind-for-test.sh config.status: creating qa/pull-tester/build-tests.sh config.status: creating src/bitcoin-config.h config.status: executing depfiles commands
PC@DESKTOP-T88HSRK /c/bitcoin-0.9.4 $ make Making all in src make[1]: Entering directory `/c/bitcoin-0.9.4/src' make all-recursive make[2]: Entering directory `/c/bitcoin-0.9.4/src' Making all in . make[3]: Entering directory `/c/bitcoin-0.9.4/src' CXX addrman.o CXX alert.o CXX bloom.o CXX checkpoints.o CXX coins.o CXX init.o CXX keystore.o CXX leveldbwrapper.o CXX main.o CXX miner.o CXX net.o CXX noui.o CXX rpcblockchain.o CXX rpcmining.o CXX rpcmisc.o CXX rpcnet.o CXX rpcrawtransaction.o CXX rpcserver.o CXX txdb.o CXX txmempool.o AR libbitcoin_server.a CXX base58.o CXX allocators.o CXX chainparams.o CXX core.o CXX hash.o CXX key.o CXX netbase.o CXX protocol.o CXX rpcprotocol.o CXX script.o CXX sync.o CXX util.o ../share/genbuild.sh: line 19: [: too many arguments CXX version.o AR libbitcoin_common.a CXX rpcclient.o AR libbitcoin_cli.a CXX db.o CXX crypter.o CXX rpcdump.o CXX rpcwallet.o CXX wallet.o CXX walletdb.o AR libbitcoin_wallet.a CXX bitcoind.o make -C ../src leveldb/libleveldb.a make[4]: Entering directory `/c/bitcoin-0.9.4/src' Building LevelDB ... make[5]: Entering directory `/c/bitcoin-0.9.4/src/leveldb' g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c helpers/memenv/memenv.cc -o helpers/memenv/memenv.o rm -f libmemenv.a /c/mingw32/bin/ar -rs libmemenv.a helpers/memenv/memenv.o c:\mingw32\bin\ar.exe: creating libmemenv.a make[5]: Leaving directory `/c/bitcoin-0.9.4/src/leveldb' Building LevelDB ... make[5]: Entering directory `/c/bitcoin-0.9.4/src/leveldb' g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c db/builder.cc -o db/builder.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c db/c.cc -o db/c.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c db/db_impl.cc -o db/db_impl.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c db/db_iter.cc -o db/db_iter.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c db/dbformat.cc -o db/dbformat.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c db/filename.cc -o db/filename.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c db/log_reader.cc -o db/log_reader.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c db/log_writer.cc -o db/log_writer.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c db/memtable.cc -o db/memtable.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c db/repair.cc -o db/repair.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c db/table_cache.cc -o db/table_cache.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c db/version_edit.cc -o db/version_edit.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c db/version_set.cc -o db/version_set.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c db/write_batch.cc -o db/write_batch.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c table/block.cc -o table/block.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c table/block_builder.cc -o table/block_builder.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c table/filter_block.cc -o table/filter_block.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c table/format.cc -o table/format.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c table/iterator.cc -o table/iterator.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c table/merger.cc -o table/merger.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c table/table.cc -o table/table.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c table/table_builder.cc -o table/table_builder.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c table/two_level_iterator.cc -o table/two_level_iterator.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c util/arena.cc -o util/arena.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c util/bloom.cc -o util/bloom.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c util/cache.cc -o util/cache.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c util/coding.cc -o util/coding.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c util/comparator.cc -o util/comparator.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c util/crc32c.cc -o util/crc32c.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c util/env.cc -o util/env.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c util/env_posix.cc -o util/env_posix.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c util/env_win.cc -o util/env_win.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c util/filter_policy.cc -o util/filter_policy.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c util/hash.cc -o util/hash.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c util/histogram.cc -o util/histogram.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c util/logging.cc -o util/logging.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c util/options.cc -o util/options.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c util/status.cc -o util/status.o g++ -I. -I./include -fno-builtin-memcmp -D_REENTRANT -DOS_WINDOWS -DLEVELDB_PLATFORM_WINDOWS -DWINVER=0x0500 -D__USE_MINGW_ANSI_STDIO=1 -g -O2 -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -w -Wstack-protector -fstack-protector-all -fPIE -I/c/deps/db-4.8.30.NC/build_unix -I/c/deps/openssl-1.0.1l/include -I/c/deps -I/c/deps/protobuf-2.6.1/src -I/c/deps/libpng-1.6.16 -I/c/deps/qrencode-3.4.4 -DBOOST_SPIRIT_THREADSAFE -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_MT -DWIN32 -D_WINDOWS -DBOOST_THREAD_USE_LIB -D_FILE_OFFSET_BITS=64 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DMINIUPNP_STATICLIB -c port/port_win.cc -o port/port_win.o rm -f libleveldb.a /c/mingw32/bin/ar -rs libleveldb.a db/builder.o db/c.o db/db_impl.o db/db_iter.o db/dbformat.o db/filename.o db/log_reader.o db/log_writer.o db/memtable.o db/repair.o db/table_cache.o db/version_edit.o db/version_set.o db/write_batch.o table/block.o table/block_builder.o table/filter_block.o table/format.o table/iterator.o table/merger.o table/table.o table/table_builder.o table/two_level_iterator.o util/arena.o util/bloom.o util/cache.o util/coding.o util/comparator.o util/crc32c.o util/env.o util/env_posix.o util/env_win.o util/filter_policy.o util/hash.o util/histogram.o util/logging.o util/options.o util/status.o port/port_win.o c:\mingw32\bin\ar.exe: creating libleveldb.a make[5]: Leaving directory `/c/bitcoin-0.9.4/src/leveldb' make[4]: Leaving directory `/c/bitcoin-0.9.4/src' CXXLD bitcoind.exe CXX bitcoin-cli.o CXXLD bitcoin-cli.exe make[3]: Leaving directory `/c/bitcoin-0.9.4/src' make[2]: Leaving directory `/c/bitcoin-0.9.4/src' make[1]: Leaving directory `/c/bitcoin-0.9.4/src' make[1]: Entering directory `/c/bitcoin-0.9.4' make[1]: Nothing to be done for `all-am'. make[1]: Leaving directory `/c/bitcoin-0.9.4'
|
|
|
|
Fuzzbawls
|
|
December 15, 2015, 10:24:30 PM |
|
configure: WARNING: libprotobuf not found; bitcoin-qt frontend will not be built
You're missing libprotobuf, which is required to build the GUI, hence no bitcoin-qt.exe file
|
|
|
|
Black*M
Newbie
Offline
Activity: 39
Merit: 0
|
|
December 16, 2015, 10:47:45 PM |
|
great Tutorial Guys what best Qt and Mingw version
|
|
|
|
moon_sun
Newbie
Offline
Activity: 17
Merit: 0
|
|
December 17, 2015, 10:41:57 PM |
|
configure: WARNING: libprotobuf not found; bitcoin-qt frontend will not be built
You're missing libprotobuf, which is required to build the GUI, hence no bitcoin-qt.exe file I made again libprotobuf and it works now! I am very excited Now I want to compile my own windows wallets from altcoin sources, how to do it?
|
|
|
|
old c coder
|
|
December 18, 2015, 12:31:34 AM |
|
configure: WARNING: libprotobuf not found; bitcoin-qt frontend will not be built
You're missing libprotobuf, which is required to build the GUI, hence no bitcoin-qt.exe file I made again libprotobuf and it works now! I am very excited Now I want to compile my own windows wallets from altcoin sources, how to do it? Well that's easy For older *coins, you would follow message #1' steps towards the end, at Additional notes for older Bitcoin 0.8.6 (may be useful for Bitcoin based altcoins) (aren't they all based on Bitcoin?) and use the analogous steps for your *coin, daemon or Qt version. You should study the makefile.mingw and *coin-qt.pro files for your (older) *coins to see what subtleties might be different. For newer *coins, you would follow message #1' steps 1. - 3., and use the analogous steps for your *coin, daemon or Qt version. And you should study the autogen.?, config.?, makefile.? files for your (newer) *coins to see what subtleties might be different I don't think there is any more that can be said? Without payments of course Ron
|
LTC: LUYiMVsrFQewUSPDasSKGzhyTPAkiTeSov BTC: 1DPvP6WoZzaNQ9Nxzd64hjYad1kyQzTTbx YAC: Y3ZggXDvnRJaRwtVGyGJwt6DMLN3EPQpQf The day is coming when a single carrot, freshly observed, will set off a revolution. Paul Cezanne
|
|
|
|