NotFuzzyWarm
Legendary
Offline
Activity: 3724
Merit: 2649
Evil beware: We have waffles!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2018, 02:26:47 PM |
|
<snip> Any suggestions on a PSU, preferably a quieter one than the 1300w server PSU?
I've been becoming rather fond of Bitmain's APW3++ series. They are rated up to 1,200W @ 110v (1,600W @ 240v) and are quiet even when moderately loaded. Their one quirk is that if it ever shuts down from overload it takes several minutes before it will restart despite being only slightly warm .
|
|
|
|
jsays
Jr. Member
Offline
Activity: 78
Merit: 7
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2018, 02:30:14 PM |
|
I do not have the equipment (or experience for comfort) to do this, but I do have an S7 (45 asic) gathering dust.
Is anyone out there offering this (re)programming as a paid service?
|
|
|
|
House Xylander
Jr. Member
Offline
Activity: 97
Merit: 5
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2018, 02:56:38 PM Last edit: June 30, 2018, 12:55:01 AM by frodocooper |
|
I've been becoming rather fond of Bitmain's APW3++ series. They are rated up to 1,200W @ 110v (1,600W @ 240v) and are quiet even when moderately loaded. Their one quirk is that if it ever shuts down from overload it takes several minutes before it will restart despite being only slightly warm .
Would i need 1300w since i have lowered the mv with thee hex files? I figured 800w max for ramp up then it would settle to 630-640w.
|
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3724
Merit: 2649
Evil beware: We have waffles!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2018, 03:07:59 PM |
|
Would i need 1300w since i have lowered the mv with thee hex files? Maybe for a short time until the s7's throttle down. Good thing is, the APW3++ is seriously de-rated. I've ran a few at 1,350-1,400w fed from 110v for several days with no issues other than the fans running at full speed. Still quieter than the hair dryer like sound from HP DP1200w supplies. Several companies distribute the APW's, I use Blockforge.com in the US
|
|
|
|
House Xylander
Jr. Member
Offline
Activity: 97
Merit: 5
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2018, 06:20:32 PM Last edit: June 30, 2018, 12:55:36 AM by frodocooper |
|
Maybe for a short time until the s7's throttle down. Good thing is, the APW3++ is seriously de-rated. I've ran a few at 1,350-1,400w fed from 110v for several days with no issues other than the fans running at full speed. Still quieter than the hair dryer like sound from HP DP1200w supplies.
Several companies distribute the APW's, I use Blockforge.com in the US
Thank you, will look into them.
|
|
|
|
House Xylander
Jr. Member
Offline
Activity: 97
Merit: 5
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 01, 2018, 03:33:20 PM |
|
I let each board run solo on my S7 for a day or so each. I fired up the third board for a solo run last night and it immediately showed all 3 boards with "oooo"s and 48 chips.
I switch the ribbon cable out for one of the other boards - same result
I re-flashed it with different hex files, starting from 620 up to 690 - same result
Changed power supply from apw3++ 1300 to an EVGA 750 - same result
I have run out of ideas at this point and would greatly appreciate the help.
Thank you
edit: added additional info
|
|
|
|
jsays
Jr. Member
Offline
Activity: 78
Merit: 7
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 12, 2018, 02:44:25 PM |
|
Sidehack, or others... anyone offer (or willing to do) this as a paid service, for those of us that don't have the knowledge/comfort to do so ourselves?
|
|
|
|
fanatic26_
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 12, 2018, 03:34:18 PM |
|
Sidehack, or others... anyone offer (or willing to do) this as a paid service, for those of us that don't have the knowledge/comfort to do so ourselves?
Its really not worth the time or effort to ship it, have it done, send it back and all that nonsense. Plus when you dont like how it runs and you start to complain, nobody wants to deal with that. Just man up and do it yourself, it costs almost nothing for a PIC programmer and then like 15 minutes of your time to actually do it.
|
|
|
|
sidehack (OP)
Legendary
Offline
Activity: 3360
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 12, 2018, 04:50:53 PM |
|
It's true. All the software is free and you can get a PICKit clone for like $20.
|
|
|
|
jsays
Jr. Member
Offline
Activity: 78
Merit: 7
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 24, 2018, 07:42:02 PM |
|
It's true. All the software is free and you can get a PICKit clone for like $20.
I have one on order, looks like it'll arrive Friday so hoping that will be my fun for the weekend. Had another S7 hashboard die, just won't show all the asics...so the last two boards I have are running in one machine. If I can update both of those, hoping to get them as low as 2.5Th at 600W...in which case I should actually be able to run it in the house!
|
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3724
Merit: 2649
Evil beware: We have waffles!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 24, 2018, 07:57:06 PM |
|
Depending on the condition of the chips and resulting speed/voltage the miner will be stable at, with 3 boards mine were running at ~ 3.5 to 3.9THs with fans at 20-25%, power draw was around 750W. Result is more than quiet enough for the office or home.
|
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3724
Merit: 2649
Evil beware: We have waffles!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 25, 2018, 03:59:37 PM |
|
how much energy does the miner consume? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ... Perhaps try READING the post right above yours?
|
|
|
|
adaseb
Legendary
Offline
Activity: 3836
Merit: 1723
Up to 300% + 200 FS deposit bonuses
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 31, 2018, 07:50:52 AM |
|
Depending on the condition of the chips and resulting speed/voltage the miner will be stable at, with 3 boards mine were running at ~ 3.5 to 3.9THs with fans at 20-25%, power draw was around 750W. Result is more than quiet enough for the office or home.
Really surprised you got it to be quiet enough for an office with a 750W power draw. I remember with my old Antminer S3, to get it quiet enough for a bedroom I had to undervolt and underclock so it pulled 300Watts and I was able to get away with using 2 computer case fans (from a KnCMiner Jupiter actually). With a 750W power draw, I don't think it would be possible to make it that quiet. But I guess everybody has different noise levels and they are all relative.
|
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3724
Merit: 2649
Evil beware: We have waffles!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 31, 2018, 02:21:50 PM |
|
With a 750W power draw, I don't think it would be possible to make it that quiet. But I guess everybody has different noise levels and they are all relative. The UV/UC s7's get very quiet. Given 70F ambient it is quieter than the central AC. Still audible at a distance but not distracting in the least.
|
|
|
|
adaseb
Legendary
Offline
Activity: 3836
Merit: 1723
Up to 300% + 200 FS deposit bonuses
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 01, 2018, 03:34:21 PM |
|
With a 750W power draw, I don't think it would be possible to make it that quiet. But I guess everybody has different noise levels and they are all relative. The UV/UC s7's get very quiet. Given 70F ambient it is quieter than the central AC. Still audible at a distance but not distracting in the least. I guess the difference can be the hashboards. If I recall the S3 hashboard had exposed chips, while the S7 had individual heatsinks on each chip. So I guess the S7 needed a little less airflow since the heatsinks did a good job of absorbing most of the heat, while the S3 needed much more air. Really temped to pick up a couple of these and just mod them for old time sakes. Been a while since I've had an Antminer and they are dirt cheap right now. Maybe point it in ckpool solo and hope it hits a block one day.
|
|
|
|
potofgreed
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 21, 2021, 09:43:35 PM |
|
BUMP
Does anyone happen to still have the hex files lying around? Sidehack's link earlier in the thread is dead. Would be much appreciated
|
|
|
|
lonewoof1337
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2021, 03:52:42 PM |
|
Hello all!
Any chance that the files needed for this mod are floating around somewhere? The link posted a few years ago at gekkoscience is dead now : (
I'd really like to do some tinkering with an S7 I just picked up.
Any help would be appreciated!
Happy holidays!
-woof
|
|
|
|
|
sidehack (OP)
Legendary
Offline
Activity: 3360
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 29, 2021, 05:40:26 PM |
|
So in June my people convinced me to change webhosts and get a better managed email frontend. This jacked up some of the website stuff. I'm in the process of migrating back because the recommended outfit is not good. That's why the file link is dead. It'll come back someday, hopefully early next year.
It's cool to see people are still interested in this project.
|
|
|
|
|