[ANN] [ICASH] | DARKSEND | MASTERNODE | POW | NO Premine | No ICO

[Polcrack]


not capable masternode: Could not find suitable coins!

someone help plz

I followed the bitsend guide and have 300k for 3 masternodes

try

https://www.reddit.com/r/dashpay/comments/43sxqs/not_capable_masternode_could_not_find_suitable/

https://www.dash.org/forum/threads/not-capable-masternode-could-not-find-suitable-coins.4539/

thx friend I could activate 1 masternode , my ask now is how can I add other 2 masternodes??  ....I m going to try it reading your links .. =))

each 100,000 icash on your wallet, you can actived 1 masternode, if you have 200,000 icash you can actived 2 masternode.
and i want to say it's cheap now because 1 icash price today only 87 sats - 100 sats

yeahbut how I can activate the others 2 ?? explain plz

for example : for 1 masternode is like this

tep 1) Start your icash wallet.
Step 2) Go to: Tools->Debug ->Console and write "getaccountaddress 0". Copy the address and send exactly 100000 icash to that address (which is in your wallet).
Step 3) Go to: Tools->Debug ->Console and type the following command and hit enter:

Code: [Select]
masternode genkey

Step 4) Copy the result and place it in the icash.conf file below (look at the configuration for details): (Go to: Tools->Open Configuration File)

Code: [Select]
rpcallowip=127.0.0.1
rpcuser=YourUserName
rpcpassword=YourRPCPassword
server=1
daemon=1
listen=1
masternodeaddr=YOUR_IP:5555
promode=1
masternode=1
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey


and maybe for 3 masternodes is like this??


tep 1) Start your icash wallet.
Step 2) Go to: Tools->Debug ->Console and write "getaccountaddress 0". Copy the address and send exactly 100000 icash to that address (which is in your wallet). (3 times)
Step 3) Go to: Tools->Debug ->Console and type the following command and hit enter:

Code: [Select]
masternode genkey(3 times)

Step 4) Copy the result and place it in the icash.conf file below (look at the configuration for details): (Go to: Tools->Open Configuration File)

Code: [Select]
rpcallowip=127.0.0.1
rpcuser=YourUserName
rpcpassword=YourRPCPassword
server=1
daemon=1
listen=1
masternodeaddr=YOUR_IP:5555
promode=3
masternode=3
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey(1)
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey(2)
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey(3)

[1715482920]

1715482920

[hugabase]

this is very surprise! Difficulty 164.67373380 with Network gH/s 4.203530370

[smokim87]

@jcksteve

Can you add to the OP links for masternode creation guide, coins required to run a masternode. Would help people looking for those.

[Polcrack]

@jcksteve

Can you add to the OP links for masternode creation guide, coins required to run a masternode. Would help people looking for those.

work for 1 masternode

tep 1) Start your icash wallet.
Step 2) Go to: Tools->Debug ->Console and write "getaccountaddress 0". Copy the address and send exactly 100000 icash to that address (which is in your wallet).
Step 3) Go to: Tools->Debug ->Console and type the following command and hit enter:

masternode genkey

Step 4) Copy the result and place it in the icash.conf file below (look at the configuration for details): (Go to: Tools->Open Configuration File)

rpcallowip=127.0.0.1
rpcuser=YourUserName
rpcpassword=YourRPCPassword
server=1
daemon=1
listen=1
masternodeaddr=YOUR_IP:5555
promode=1
masternode=1
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey


and maybe for 3 masternodes is like this??


tep 1) Start your icash wallet.
Step 2) Go to: Tools->Debug ->Console and write "getaccountaddress 0". Copy the address and send exactly 100000 icash to that address (which is in your wallet). (3 times)
Step 3) Go to: Tools->Debug ->Console and type the following command and hit enter:

Code: [Select]
masternode genkey(3 times)

Step 4) Copy the result and place it in the icash.conf file below (look at the configuration for details): (Go to: Tools->Open Configuration File)

Code: [Select]
rpcallowip=127.0.0.1
rpcuser=YourUserName
rpcpassword=YourRPCPassword
server=1
daemon=1
listen=1
masternodeaddr=YOUR_IP:5555
promode=3
masternode=3
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey(1)
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey(2)
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey(3)

[TomVelvetPaws]

This is from the CRAVE thread and I thought I would put it here too

this was in response to the guy that had his 7000+ pivx frozen in cold storage at yobit

Quote from: Taltos777 on Today at 08:35:34 PM
That sucks. Looks like exchanges are playing govt roles these days. So much for privacy coins Sad

TomVelvetPaws

Well, we have privacy ones Monero being the big boy on the block then not in any particular order  Pivx Droidz ICASH Darkcash 8Bit and Crave we are making a comeback.A revolution you might say.Support them all if you are able.United we stand as you might say.No need for competition between any of us we all should stick together.I want to get the dark market started back up again with crave but I need someone that's a dev to do that as I have no idea how to do it.I believe Crave is the rare one in the list hence it could fetch a higher price and like I said we need to get the dark market back up and running again which is supposedly integrated into this coin and wallet.I just don't know how.I'm not a developer I'm a PR guy and a torch bearer for what I love to believe in and have a passion for.I like to help people and do what's right by the world.I believe the law should be obeyed but at the same time, I believe it can be too restrictive and one should be able to choose their own path as long as it does not harm others. but yes That pisses me off to no end. 

[BTC-BTC-BTC]

@jcksteve

Can you add to the OP links for masternode creation guide, coins required to run a masternode. Would help people looking for those.

work for 1 masternode

tep 1) Start your icash wallet.
Step 2) Go to: Tools->Debug ->Console and write "getaccountaddress 0". Copy the address and send exactly 100000 icash to that address (which is in your wallet).
Step 3) Go to: Tools->Debug ->Console and type the following command and hit enter:

masternode genkey

Step 4) Copy the result and place it in the icash.conf file below (look at the configuration for details): (Go to: Tools->Open Configuration File)

rpcallowip=127.0.0.1
rpcuser=YourUserName
rpcpassword=YourRPCPassword
server=1
daemon=1
listen=1
masternodeaddr=YOUR_IP:5555
promode=1
masternode=1
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey


and maybe for 3 masternodes is like this??


tep 1) Start your icash wallet.
Step 2) Go to: Tools->Debug ->Console and write "getaccountaddress 0". Copy the address and send exactly 100000 icash to that address (which is in your wallet). (3 times)
Step 3) Go to: Tools->Debug ->Console and type the following command and hit enter:

Code: [Select]
masternode genkey(3 times)

Step 4) Copy the result and place it in the icash.conf file below (look at the configuration for details): (Go to: Tools->Open Configuration File)

Code: [Select]
rpcallowip=127.0.0.1
rpcuser=YourUserName
rpcpassword=YourRPCPassword
server=1
daemon=1
listen=1
masternodeaddr=YOUR_IP:5555
promode=3
masternode=3
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey(1)
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey(2)
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey(3)

Wow. Great to know. Anyone is running more than one MN on port 5555? What I remember 5555 is the only port for MN. I have to fire back up with my icash MN.

[Polcrack]

@jcksteve

Can you add to the OP links for masternode creation guide, coins required to run a masternode. Would help people looking for those.

work for 1 masternode

tep 1) Start your icash wallet.
Step 2) Go to: Tools->Debug ->Console and write "getaccountaddress 0". Copy the address and send exactly 100000 icash to that address (which is in your wallet).
Step 3) Go to: Tools->Debug ->Console and type the following command and hit enter:

masternode genkey

Step 4) Copy the result and place it in the icash.conf file below (look at the configuration for details): (Go to: Tools->Open Configuration File)

rpcallowip=127.0.0.1
rpcuser=YourUserName
rpcpassword=YourRPCPassword
server=1
daemon=1
listen=1
masternodeaddr=YOUR_IP:5555
promode=1
masternode=1
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey


and maybe for 3 masternodes is like this??


tep 1) Start your icash wallet.
Step 2) Go to: Tools->Debug ->Console and write "getaccountaddress 0". Copy the address and send exactly 100000 icash to that address (which is in your wallet). (3 times)
Step 3) Go to: Tools->Debug ->Console and type the following command and hit enter:

Code: [Select]
masternode genkey(3 times)

Step 4) Copy the result and place it in the icash.conf file below (look at the configuration for details): (Go to: Tools->Open Configuration File)

Code: [Select]
rpcallowip=127.0.0.1
rpcuser=YourUserName
rpcpassword=YourRPCPassword
server=1
daemon=1
listen=1
masternodeaddr=YOUR_IP:5555
promode=3
masternode=3
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey(1)
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey(2)
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey(3)

Wow. Great to know. Anyone is running more than one MN on port 5555? What I remember 5555 is the only port for MN. I have to fire back up with my icash MN.

=) I WANT BELIEVE THAT IM RUNING 3 MASTERNODES on 5555 but I dont know if Im doing well or not with the config for to run 3 mn
the reality its thay have in my wallet 300k (on 3 diferents adresses) and minimun 1 mn running every hour about 130/150 icash
so I want that someone that its running more than one mn give me a response if im fine or not (with the config)
regards polcrack

[Limx Dev]

Please remove the command "promode" that has only bitsend.

Kind Regards
Christian

[2bfree]

@jcksteve

Can you add to the OP links for masternode creation guide, coins required to run a masternode. Would help people looking for those.

work for 1 masternode

tep 1) Start your icash wallet.
Step 2) Go to: Tools->Debug ->Console and write "getaccountaddress 0". Copy the address and send exactly 100000 icash to that address (which is in your wallet).
Step 3) Go to: Tools->Debug ->Console and type the following command and hit enter:

masternode genkey

Step 4) Copy the result and place it in the icash.conf file below (look at the configuration for details): (Go to: Tools->Open Configuration File)

rpcallowip=127.0.0.1
rpcuser=YourUserName
rpcpassword=YourRPCPassword
server=1
daemon=1
listen=1
masternodeaddr=YOUR_IP:5555
promode=1
masternode=1
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey


and maybe for 3 masternodes is like this??


tep 1) Start your icash wallet.
Step 2) Go to: Tools->Debug ->Console and write "getaccountaddress 0". Copy the address and send exactly 100000 icash to that address (which is in your wallet). (3 times)
Step 3) Go to: Tools->Debug ->Console and type the following command and hit enter:

Code: [Select]
masternode genkey(3 times)

Step 4) Copy the result and place it in the icash.conf file below (look at the configuration for details): (Go to: Tools->Open Configuration File)

Code: [Select]
rpcallowip=127.0.0.1
rpcuser=YourUserName
rpcpassword=YourRPCPassword
server=1
daemon=1
listen=1
masternodeaddr=YOUR_IP:5555
promode=3
masternode=3
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey(1)
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey(2)
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey(3)

Wow. Great to know. Anyone is running more than one MN on port 5555? What I remember 5555 is the only port for MN. I have to fire back up with my icash MN.

=) I WANT BELIEVE THAT IM RUNING 3 MASTERNODES on 5555 but I dont know if Im doing well or not with the config for to run 3 mn
the reality its thay have in my wallet 300k (on 3 diferents adresses) and minimun 1 mn running every hour about 130/150 icash
so I want that someone that its running more than one mn give me a response if im fine or not (with the config)
regards polcrack

Is it to much to ask for someone to make a beginner video for non technical people to make an icash masternode and the benefits of it or at least write it up assuming we are just investors and not developers. Is that to much to ask?

[smokim87]

Tried running a masternode but getting this error:

not capable masternode: Could not connect to my-public-ip:5555

I tried deleting the peer.dat file and restarting the wallet, did not help.

Port is opened confirmed by checking at http://www.yougetsignal.com/tools/open-ports/ and it says 5555 is opened.

Any ideas guys? I followed the steps, sent myself 100k coins exactly.

oh after sending the 100k to myself, is there a min amount of confirmations needed before the masternode actually works?

After searching alittle in google, appears sending 100k coins might need 15 confirmations before MN will start...waiting to hit that to test.

[Polcrack]

Tried running a masternode but getting this error:

not capable masternode: Could not connect to my-public-ip:5555

I tried deleting the peer.dat file and restarting the wallet, did not help.

Port is opened confirmed by checking at http://www.yougetsignal.com/tools/open-ports/ and it says 5555 is opened.

Any ideas guys? I followed the steps, sent myself 100k coins exactly.

oh after sending the 100k to myself, is there a min amount of confirmations needed before the masternode actually works?

After searching alittle in google, appears sending 100k coins might need 15 confirmations before MN will start...waiting to hit that to test.

Try open ports firewall/router
15 confirmations

[asdalani]

Dang, this coin was like 10 satoshi's and now there's a sudden interest it lol.

[Polcrack]

@jcksteve

Can you add to the OP links for masternode creation guide, coins required to run a masternode. Would help people looking for those.

work for 1 masternode

tep 1) Start your icash wallet.
Step 2) Go to: Tools->Debug ->Console and write "getaccountaddress 0". Copy the address and send exactly 100000 icash to that address (which is in your wallet).
Step 3) Go to: Tools->Debug ->Console and type the following command and hit enter:

masternode genkey

Step 4) Copy the result and place it in the icash.conf file below (look at the configuration for details): (Go to: Tools->Open Configuration File)

rpcallowip=127.0.0.1
rpcuser=YourUserName
rpcpassword=YourRPCPassword
server=1
daemon=1
listen=1
masternodeaddr=YOUR_IP:5555
promode=1
masternode=1
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey


and maybe for 3 masternodes is like this??


tep 1) Start your icash wallet.
Step 2) Go to: Tools->Debug ->Console and write "getaccountaddress 0". Copy the address and send exactly 100000 icash to that address (which is in your wallet). (3 times)
Step 3) Go to: Tools->Debug ->Console and type the following command and hit enter:

Code: [Select]
masternode genkey(3 times)

Step 4) Copy the result and place it in the icash.conf file below (look at the configuration for details): (Go to: Tools->Open Configuration File)

Code: [Select]
rpcallowip=127.0.0.1
rpcuser=YourUserName
rpcpassword=YourRPCPassword
server=1
daemon=1
listen=1
masternodeaddr=YOUR_IP:5555
promode=3
masternode=3
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey(1)
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey(2)
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey(3)

Wow. Great to know. Anyone is running more than one MN on port 5555? What I remember 5555 is the only port for MN. I have to fire back up with my icash MN.

=) I WANT BELIEVE THAT IM RUNING 3 MASTERNODES on 5555 but I dont know if Im doing well or not with the config for to run 3 mn
the reality its thay have in my wallet 300k (on 3 diferents adresses) and minimun 1 mn running every hour about 130/150 icash
so I want that someone that its running more than one mn give me a response if im fine or not (with the config)
regards polcrack

Is it to much to ask for someone to make a beginner video for non technical people to make an icash masternode and the benefits of it or at least write it up assuming we are just investors and not developers. Is that to much to ask?

Its easy Open wour icash wallet,  click tools , open configuration file; and copy paste this with your personal mn info

rpcallowip=127.0.0.1
rpcuser=username
rpcpassword=passowrd
server=1
daemon=1
listen=1
masternodeaddr=your ip public:5555
masternode=1
masternodeprivkey=key masternode
staking=0
port=5555
addnode=98.118.105.12:5555
addnode=54.187.214.128:5555
addnode=85.214.95.177:5555
addnode=85.236.188.213:5555
addnode=109.248.33.69
addnode=108.235.132.66
addnode=5.189.144.97
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=192.241.198.44
addnode=172.245.173.137
addnode=104.238.133.141
addnode=45.63.20.133
addnode=104.156.251.58
addnode=104.238.187.114
addnode=45.32.7.64
addnode=2001:19f0:7402:17:5400:ff:fe2a:c4e3
addnode=185.45.192.177
addnode=2a01:4f8:191:31ea::2
addnode=144.76.35.235
addnode=159.203.7.244
addnode=81.26.143.178


for your masternode info open Debugging console
and step by step
work for 1 masternode

tep 1) Start your icash wallet.
Step 2) Go to: Tools->Debug ->Console and write "getaccountaddress 0". Copy the address and send exactly 100000 icash to that address (which is in your wallet).
Step 3) Go to: Tools->Debug ->Console and type the following command and hit enter:

masternode genkey

Step 4) Copy the result and place it in the icash.conf file  (Go to: Tools->Open Configuration File)

masternodeaddr=YOUR_IP:5555
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey

[TomVelvetPaws]

Dang, this coin was like 10 satoshi's and now there's a sudden interest it lol.

it is because we back hop aboard the Dark train, my brother.

[jokowi]

How to active 1 masternode on icash Wallet

Its easy Open your icash wallet,  click tools , open configuration file; and copy paste this with your personal MN info

rpcallowip=127.0.0.1
rpcuser=username
rpcpassword=passowrd
server=1
daemon=1
listen=1
masternodeaddr=your ip public/IP computer:5555
masternode=1
masternodeprivkey=key masternode
staking=0
port=5555
addnode=98.118.105.12:5555
addnode=54.187.214.128:5555
addnode=85.214.95.177:5555
addnode=85.236.188.213:5555
addnode=109.248.33.69
addnode=108.235.132.66
addnode=5.189.144.97
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=85.175.216.200
addnode=192.241.198.44
addnode=172.245.173.137
addnode=104.238.133.141
addnode=45.63.20.133
addnode=104.156.251.58
addnode=104.238.187.114
addnode=45.32.7.64
addnode=2001:19f0:7402:17:5400:ff:fe2a:c4e3
addnode=185.45.192.177
addnode=2a01:4f8:191:31ea::2
addnode=144.76.35.235
addnode=159.203.7.244
addnode=81.26.143.178


for your masternode info open Debugging console
and step by step
work for 1 masternode

tep 1) Start your icash wallet.
Step 2) Go to: Tools->Debug ->Console and write "getaccountaddress 0". Copy the address and send exactly 100000 icash to that address (which is in your wallet).
Step 3) Go to: Tools->Debug ->Console and type the following command and hit enter:

masternode genkey

Step 4) Copy the result and place it in the icash.conf file  (Go to: Tools->Open Configuration File)

masternodeaddr=YOUR_IP_public/computer:5555
masternodeprivkey=KEY GENERATED BY COMMAND masternode genkey

[Cymatoxa]

Guys let's get together all together and try to promote the coin on BITTREX. Suddenly we will succeed! Who does not mind?

[Polcrack]

Guys let's get together all together and try to promote the coin on BITTREX. Suddenly we will succeed! Who does not mind?

yeah

[Polcrack]

I'm going to buy with 1 bitcoin everything that is sold in icash so be prepared for the bubble

[hananl1styo]

Guys let's get together all together and try to promote the coin on BITTREX. Suddenly we will succeed! Who does not mind?

How?, I Will help promote if i can 

[brightlight]

Guys let's get together all together and try to promote the coin on BITTREX. Suddenly we will succeed! Who does not mind?

How?, I Will help promote if i can 

Just rise BTCs to pay Bittrex and problem is solved.