[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[tytanick]

I can implement like in 10 min another miner which will have different pool, but as user authetication it must have ethereum wallet address
so i can use ethpool.
Will be this ok ?

[AmoreJaz]

I can implement like in 10 min another miner which will have different pool, but as user authetication it must have ethereum wallet address
so i can use ethpool.
Will be this ok ?

im not sure what your asking?

i can also change the pool as in simply changing the config.json but that is not the issue, as with any pool there may be times of problems so a backup or fallover pool is always very good advice,

[tytanick]

i can eccept pools which as parameter "user" accept "wallet address"

So i can accept ethpool.org as it requires only wallet address to start mining.
All other pools which need to signup/create account i cant implement.
So any other than ethpool which requires eth wallet address do you have in mind ?

[tytanick]

Hello,

This is only website small update so all rigs stays on v1004
- ability to set custom name for each rig
- option to use ethpool.org instead of dwarfpool (dwarfpool has some problems recently)

[voltlon]

hi

i take this problem , no work with rx480, how config or resolved ? thanks

https://i.imgur.com/3KsV8zC.jpg

[tytanick]

hi

i take this problem , no work with rx480, how config or resolved ? thanks

There is still no support for RX400
I am still working on OS for RX400...

[xleejohnx]

Since you are using claymore does ethman work if running on another computer with windows?

[tytanick]

Since you are using claymore does ethman work if running on another computer with windows?

Hi, yes it should work.
 -mport -3333
try using 3333 as API port.

[sony87]

I can implement like in 10 min another miner which will have different pool, but as user authetication it must have ethereum wallet address
so i can use ethpool.
Will be this ok ?

Hi, can you implement eworker paramether option so we can specify workers in ethpool, now all goes to default. Also if possible to set fan speed by the dashboard per rig would be nice!

[tytanick]

I can implement like in 10 min another miner which will have different pool, but as user authetication it must have ethereum wallet address
so i can use ethpool.
Will be this ok ?

Hi, can you implement eworker paramether option so we can specify workers in ethpool, now all goes to default. Also if possible to set fan speed by the dashboard per rig would be nice!

yeah its next step, now you can set names to your rigs, so next will be worker name in ethpool and dwarfpool
About speed option, i will make adjustable target temperature.
But can someone tell me what is wrong with temperature set to 80 C and auto adjusting fans ?

[sony87]

I can implement like in 10 min another miner which will have different pool, but as user authetication it must have ethereum wallet address
so i can use ethpool.
Will be this ok ?

Hi, can you implement eworker paramether option so we can specify workers in ethpool, now all goes to default. Also if possible to set fan speed by the dashboard per rig would be nice!

yeah its next step, now you can set names to your rigs, so next will be worker name in ethpool and dwarfpool
About speed option, i will make adjustable target temperature.
But can someone tell me what is wrong with temperature set to 80 C and auto adjusting fans ?

let's say I/some of us prefer to damage the fans and keep them on 100% as they are replaceable but cards are not so easy + draw less power

[AmoreJaz]

I can implement like in 10 min another miner which will have different pool, but as user authetication it must have ethereum wallet address
so i can use ethpool.
Will be this ok ?

Hi, can you implement eworker paramether option so we can specify workers in ethpool, now all goes to default. Also if possible to set fan speed by the dashboard per rig would be nice!

yeah its next step, now you can set names to your rigs, so next will be worker name in ethpool and dwarfpool
About speed option, i will make adjustable target temperature.
But can someone tell me what is wrong with temperature set to 80 C and auto adjusting fans ?

let's say I/some of us prefer to damage the fans and keep them on 100% as they are replaceable but cards are not so easy + draw less power

or some of us already have replaced fans cannibalized from other cards cuz the right fans never got shipped! and one of the fans dont work well, or one of the cards needs to be cleaned and im to lazy to clean it. or maybe its the rig owners preference?

[sony87]

Testing the OS for 3 days and i'm stunned how well it performs in matter of stability. Few things I noted:
1. Sometimes when i'm clocking cards one of them stuck ot 450/501Mhz on the core and does not take the value I have put. Coming from Windows i know that this card is working well and can handle it. How to investigate/fix this ?
2. Rig Name column should be configured and sorted from A to Z as of now it's not and it's confusing.
3. GPU errors that I don't know what it means:
[ 17.607877] vgaarb: this pci device is not a vga device
[ 17.607889] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io mem,decodes=none:owns=none

Keep up the good work. From the moment I see RX4XX support, fans peed control, overclocking and voltage if possible and worker name per rig i'm migrating all to this simple and well working OS.
Thanks again !

[tytanick]

Testing the OS for 3 days and i'm stunned how well it performs in matter of stability. Few things I noted:
1. Sometimes when i'm clocking cards one of them stuck ot 450/501Mhz on the core and does not take the value I have put. Coming from Windows i know that this card is working well and can handle it. How to investigate/fix this ?
2. Rig Name column should be configured and sorted from A to Z as of now it's not and it's confusing.
3. GPU errors that I don't know what it means:
[ 17.607877] vgaarb: this pci device is not a vga device
[ 17.607889] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io mem,decodes=none:owns=none

Keep up the good work. From the moment I see RX4XX support, fans peed control, overclocking and voltage if possible and worker name per rig i'm migrating all to this simple and well working OS.
Thanks again !

1. I will PM you about this - and see whats going on.
2. Yeah this table should be more elastic and realtime refreshed i am aware of this
3. Nothing bad, just linux debug message, all its ok.

[hammerhead8599]

I am trying out your OS now with two r9 290x's. Here are the specs from SM.net

GPU0 t=80C fan=54%, GPU1 t=77C fan=66%
ETH: 10/03/16-04:15:41 - New job from eth-eu.dwarfpool.com:8008
ETH - Total Speed: 57.492 Mh/s, Total Shares: 43, Rejected: 0, Time: 00:27
ETH: GPU0 28.747 Mh/s, GPU1 28.744 Mh/s

Only issue I have seen so far is one of the cards dropped out after about an hour and a half. Restart and it picked up to the same specs as above. Will be adding more cards tomorrow and posting the results.
Thanks for your work on this project.

[pjmillion]

First Off - Excellent Work! You made a simple and easy to use miner and I thank you for that! Windows became unreliable after I added my third R9 Nano and ati fglrx drivers seemed to be running slower on Ubuntu server.

Secondly, I wanted to throw out some suggestions if you are open to them,
Possible options for other mining pools not just dwarf or ethpool or maybe allow the user to manually enter a pool address
X11VNC to be installed, this for folks like me that prefer headless systems
On the dashboard maybe display ip address of miner and vnc port address if different than 5900 or a console/vnc screen similar to Proxmox virtual environments
Not sure how involved it would be, but to be able to use the pools API (if available) to gather your miners stats and display on the dashboard

Thanks again and keep up the good work!

[AmoreJaz]

First Off - Excellent Work! You made a simple and easy to use miner and I thank you for that! Windows became unreliable after I added my third R9 Nano and ati fglrx drivers seemed to be running slower on Ubuntu server.

Secondly, I wanted to throw out some suggestions if you are open to them,
Possible options for other mining pools not just dwarf or ethpool or maybe allow the user to manually enter a pool address
X11VNC to be installed, this for folks like me that prefer headless systems
On the dashboard maybe display ip address of miner and vnc port address if different than 5900 or a console/vnc screen similar to Proxmox virtual environments
Not sure how involved it would be, but to be able to use the pools API (if available) to gather your miners stats and display on the dashboard

Thanks again and keep up the good work!

if you read this
http://www.vanemery.com/Linux/XoverSSH/X-over-SSH2.html
you will find out that there is actually no need to install anymore , this system already supports the x11 over ssh.
either way if your running windows or linux as a control pc ,the above artical explains exactly what is needed and how to do it, keeping the system as light as possible but still having full remote control.also eliminating the issue for port reassignments and such... if using a linux machine just a small hint would be to run it from a app called "SecPanel" not sure of anything on windows as i havent had or used it for about a decade and a half.

[sony87]

for anyone that want to change the pool or mine Expanse for example you could PM me

[tytanick]

for anyone that want to change the pool or mine Expanse for example you could PM me

i am thinking about making custom pool option for you guys.
anyway two paths of payment for service would be good:
a) auto managment and mining in my pool with 2-3% fee
b) custom options for advanced users for some $ monthly

anyway as i see custom pool is important for many users.

[sony87]

for anyone that want to change the pool or mine Expanse for example you could PM me

i am thinking about making custom pool option for you guys.
anyway two paths of payment for service would be good:
a) auto managment and mining in my pool with 2-3% fee
b) custom options for advanced users for some $ monthly

anyway as i see custom pool is important for many users.

My advise is to check ethOS and what it offers for what payment, for the moment you are too far away, not to mention you are not as active as for something which you want to make paid...