I need help troubleshooting newly arrived Avalon unit that does not power up. Since Avalon support have not answered to my e-mail, there is no link to ticket system in Avalon web store and I closely missed Nzhang on #avalon, I thought I may as well appeal to the crowd wisdom of Bitcointalk.
The unit has arrived yesterday and there was a metallic noise inside while I was unboxing it. So, I carefully opened the box before powering the box and as expected, there was one loose nut inside it. After I removed the nut, I tried to power up the unit, but no luck. There is no sound or light inside when I switch it on, the fan does not start with a well-known 'turbo' sound, just dead silence.
I searched wiki and users thread, but could not find steps for troubleshooting this situation anywhere... Any ideas/help troubleshooting this issue?
I will start with power supply
1. remove 24 Pin cable and all other cables from PDu
2. Shortcut green to the ground
http://www.ehow.com/how_4928308_make-power-supply-work-motherboard.htmlcheck if power off on button fires up psu fan shall start to rotate
If psu is good plug back all power cables and remove power of all ASIC boards
then power them one buy one while checking again and again when psu will stop
Do just one move at a time and check