fubly
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2016, 05:55:21 PM |
|
https://bitcointalk.org/index.php?topic=1569129![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fwww.zwilla.de%2Fwp-content%2Fuploads%2F2016%2F08%2Fbmminer-cgminer-492-S9-017-1200x384.jpg&t=665&c=d1q7X2tZxtAOfA) I will update within the next 24hours at github. This options must be set direct on bmminer.conf, to prevent hardware errors. TODO: GHs Stats for Chain Temp for chain and chip I had many problems and working many hours, but there is no way at moment to find out how to get these stats, for me! https://github.com/bitmaintech/bmminer/issuesp.s. If you use the new build and did not set -bitmain-freq1 -bitmain-freq2 -bitmain-freq3 the miner will choose for chain 1/2/3 the same mhz!!!
|
each time you send a transaction don't forget to use a new address, each time you receive one also!
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3724
Merit: 2646
Evil beware: We have waffles!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2016, 08:38:38 PM |
|
re: temperatures I don't know if this helps but here is the API report that Awesome Miner generates from a s9 batch-11 Version: 1.7.13 API command: config { "STATUS": [ { "STATUS": "S", "When": 1474398049, "Code": 33, "Msg": "BMMiner config", "Description": "bmminer 1.0.0" } ], "CONFIG": [ { "ASC Count": 0, "PGA Count": 0, "Pool Count": 3, "Strategy": "Failover", "Log Interval": 5, "Device Code": "", "OS": "Linux", "Failover-Only": false, "ScanTime": 60, "Queue": 1, "Expiry": 120, "Hotplug": "None" } ], "id": 1 } API command: summary { "STATUS": [ { "STATUS": "S", "When": 1474398049, "Code": 11, "Msg": "Summary", "Description": "bmminer 1.0.0" } ], "SUMMARY": [ { "Elapsed": 626491, "GHS 5s": "12934.44", "GHS av": 12903.99, "Found Blocks": 0, "Getworks": 23852, "Accepted": 162350, "Rejected": 544, "Hardware Errors": 7343, "Utility": 15.55, "Discarded": 336199, "Stale": 934, "Get Failures": 20, "Local Work": 29783168, "Remote Failures": 15, "Network Blocks": 1102, "Total MH": 8084234594038.0, "Work Utility": 179881.14, "Difficulty Accepted": 1875462150.0, "Difficulty Rejected": 2770060.0, "Difficulty Stale": 0.0, "Best Share": 857613536, "Device Hardware%": 0.0004, "Device Rejected%": 0.1475, "Pool Rejected%": 0.1475, "Pool Stale%": 0.0, "Last getwork": 1474398047 } ], "id": 1 } API command: privileged { "STATUS": [ { "STATUS": "S", "When": 1474398049, "Code": 46, "Msg": "Privileged access OK", "Description": "bmminer 1.0.0" } ], "id": 1 } API command: devs { "STATUS": [ { "STATUS": "E", "When": 1474398049, "Code": 10, "Msg": "No ", "Description": "bmminer 1.0.0" } ], "id": 1 } API command: pools { "STATUS": [ { "STATUS": "S", "When": 1474398049, "Code": 7, "Msg": "3 Pool(s)", "Description": "bmminer 1.0.0" } ], "POOLS": [ { "POOL": 0, "URL": "stratum+tcp://stratum.kano.is:3333", "Status": "Alive", "Priority": 0, "Quota": 1, "Long Poll": "N", "Getworks": 22294, "Accepted": 160651, "Rejected": 527, "Discarded": 333950, "Stale": 581, "Get Failures": 14, "Remote Failures": 8, "User": "Fuzzy.Ant70s9b11", "Last Share Time": "0:00:01", "Diff": "10.8K", "Diff1 Shares": 0, "Proxy Type": "", "Proxy": "", "Difficulty Accepted": 1863034548.0, "Difficulty Rejected": 2593716.0, "Difficulty Stale": 0.0, "Last Share Difficulty": 10773.0, "Has Stratum": true, "Stratum Active": true, "Stratum URL": "stratum.kano.is", "Has GBT": false, "Best Share": 857613536, "Pool Rejected%": 0.139, "Pool Stale%": 0.0 }, { "POOL": 1, "URL": "stratum+tcp://stratum80.kano.is:80", "Status": "Alive", "Priority": 1, "Quota": 1, "Long Poll": "N", "Getworks": 1461, "Accepted": 418, "Rejected": 12, "Discarded": 363, "Stale": 350, "Get Failures": 6, "Remote Failures": 7, "User": "Fuzzy.Ant70s9b11", "Last Share Time": "10:36:19", "Diff": "12.2K", "Diff1 Shares": 0, "Proxy Type": "", "Proxy": "", "Difficulty Accepted": 2260306.0, "Difficulty Rejected": 12504.0, "Difficulty Stale": 0.0, "Last Share Difficulty": 12200.0, "Has Stratum": true, "Stratum Active": true, "Stratum URL": "stratum80.kano.is", "Has GBT": false, "Best Share": 1994801, "Pool Rejected%": 0.5502, "Pool Stale%": 0.0 }, { "POOL": 2, "URL": "stratum+tcp://stratum.antpool.com:3333", "Status": "Alive", "Priority": 2, "Quota": 1, "Long Poll": "N", "Getworks": 97, "Accepted": 1281, "Rejected": 5, "Discarded": 1886, "Stale": 3, "Get Failures": 0, "Remote Failures": 0, "User": "Fuzzy.Ant70s9b11", "Last Share Time": "10:52:38", "Diff": "32.8K", "Diff1 Shares": 0, "Proxy Type": "", "Proxy": "", "Difficulty Accepted": 10167296.0, "Difficulty Rejected": 163840.0, "Difficulty Stale": 0.0, "Last Share Difficulty": 32768.0, "Has Stratum": true, "Stratum Active": false, "Stratum URL": "", "Has GBT": false, "Best Share": 2893938, "Pool Rejected%": 1.5859, "Pool Stale%": 0.0 } ], "id": 1 } API command: coin { "STATUS": [ { "STATUS": "S", "When": 1474398049, "Code": 78, "Msg": "BMMiner coin", "Description": "bmminer 1.0.0" } ], "COIN": [ { "Hash Method": "sha256", "Current Block Time": 1474397769.4423089, "Current Block Hash": "0000000000000000035e214199218e93b1c764732bfbb37a935936fc87c98726", "LP": true, "Network Difficulty": 225832872179.45956 } ], "id": 1 } API command: notify { "STATUS": [ { "STATUS": "S", "When": 1474398049, "Code": 60, "Msg": "Notify", "Description": "bmminer 1.0.0" } ], "NOTIFY": [ { "NOTIFY": 0, "Name": "BC5", "ID": 0, "Last Well": 1474398049, "Last Not Well": 0, "Reason Not Well": "None", "*Thread Fail Init": 0, "*Thread Zero Hash": 0, "*Thread Fail Queue": 0, "*Dev Sick Idle 60s": 0, "*Dev Dead Idle 600s": 0, "*Dev Nostart": 0, "*Dev Over Heat": 0, "*Dev Thermal Cutoff": 0, "*Dev Comms Error": 0, "*Dev Throttle": 0 } ], "id": 1 } API command: stats {"STATUS":[{"STATUS":"S","When":1474398049,"Code":70,"Msg":"BMMiner stats","Description":"bmminer 1.0.0"}],"STATS":[{"BMMiner":"1.0.0","Miner":"4.0.1.0","CompileTime":"Mon Jul 11 18:23:27 CST 2016","Type":"Antminer S9"}{"STATS":0,"ID":"BC50","Elapsed":626491,"Calls":0,"Wait":0.000000,"Max":0.000000,"Min":99999999.000000,"GHS 5s":12999.36,"GHS av":12903.99,"miner_count":3,"frequency":"600","fan_num":2,"fan1":4440,"fan2":5040,"fan3":0,"fan4":0,"fan5":0,"fan6":0,"fan7":0,"fan8":0,"temp_num":3,"temp1":62,"temp2":60,"temp3":60,"temp4":0,"temp5":0,"temp6":0,"temp7":0,"temp8":0,"temp9":0,"temp10":0,"temp11":0,"temp12":0,"temp13":0,"temp14":0,"temp15":0,"temp16":0,"temp2_1":95,"temp2_2":91,"temp2_3":93,"temp2_4":0,"temp2_5":0,"temp2_6":0,"temp2_7":0,"temp2_8":0,"temp2_9":0,"temp2_10":0,"temp2_11":0,"temp2_12":0,"temp2_13":0,"temp2_14":0,"temp2_15":0,"temp2_16":0,"temp_max":62,"Device Hardware%":0.0004,"no_matching_work":7343,"chain_acn1":63,"chain_acn2":63,"chain_acn3":63,"chain_acn4":0,"chain_acn5":0,"chain_acn6":0,"chain_acn7":0,"chain_acn8":0,"chain_acn9":0,"chain_acn10":0,"chain_acn11":0,"chain_acn12":0,"chain_acn13":0,"chain_acn14":0,"chain_acn15":0,"chain_acn16":0,"chain_acs1":" oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo ooooooo","chain_acs2":" oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo ooooooo","chain_acs3":" oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo ooooooo","chain_acs4":"","chain_acs5":"","chain_acs6":"","chain_acs7":"","chain_acs8":"","chain_acs9":"","chain_acs10":"","chain_acs11":"","chain_acs12":"","chain_acs13":"","chain_acs14":"","chain_acs15":"","chain_acs16":"","chain_hw1":364,"chain_hw2":3913,"chain_hw3":3066,"chain_hw4":0,"chain_hw5":0,"chain_hw6":0,"chain_hw7":0,"chain_hw8":0,"chain_hw9":0,"chain_hw10":0,"chain_hw11":0,"chain_hw12":0,"chain_hw13":0,"chain_hw14":0,"chain_hw15":0,"chain_hw16":0,"chain_rate1":"4322.18","chain_rate2":"4281.75","chain_rate3":"4333.52","chain_rate4":"","chain_rate5":"","chain_rate6":"","chain_rate7":"","chain_rate8":"","chain_rate9":"","chain_rate10":"","chain_rate11":"","chain_rate12":"","chain_rate13":"","chain_rate14":"","chain_rate15":"","chain_rate16":""}],"id":1} I see the various temps there under API command: stats Would that apply to your work?
|
|
|
|
fubly
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2016, 10:26:22 PM |
|
|
each time you send a transaction don't forget to use a new address, each time you receive one also!
|
|
|
fubly
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2016, 10:30:28 PM |
|
re: temperatures I don't know if this helps but here is the API report that Awesome Miner generates from a s9 batch-11
I see the various temps there under API command: stats Would that apply to your work?
No, sorry and thx. The problem is here: Line 4727: https://github.com/bitmaintech/bmminer/blob/master/driver-btm-c5.cthis: dev->chain_asic_temp[2][0] for(i = 0; i < BITMAIN_MAX_CHAIN_NUM; i++) { char temp_name[12]; sprintf(temp_name,"temp%d",i+1); root = api_add_int16(root, temp_name, &([b]dev->chain_asic_temp[i][2][0][/b]), copy_data); }
this is not working, they confused with their code, many functions are not in use or if in use it did not work like this here and that: chain_asic_temp[2][1] for(i = 0; i < BITMAIN_MAX_CHAIN_NUM; i++) { char temp2_name[12]; sprintf(temp2_name,"temp2_%d",i+1); root = api_add_int16(root, temp2_name, &(dev->chain_asic_temp[i][2][1]), copy_data); }
and this is also not working: dev->temp_top1 root = api_add_int(root, "temp_max", &([b]dev->temp_top1[/b]), copy_data); and this: displayed_rate for(i = 0; i < BITMAIN_MAX_CHAIN_NUM; i++) { char chain_rate[16]; sprintf(chain_rate,"chain_rate%d",i+1); root = api_add_string(root, chain_rate, [b]displayed_rate[i][/b], copy_data); }
this is the output of: bmminer-api -o stats STATUS=S,When=1474410815,Code=70,Msg=CGminer stats,Description=cgminer 4.9.2|CGMiner=4.9.2,Miner=4.0.1.0, CompileTime=Wed Jun 8 18:26:47 CST 2016,Type=AntminerS9|
STATS=0,ID=BC50,Elapsed=6881,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,GHS 5s=11890.91, GHS av=11796.49, miner_count=3, frequency=625, fan_num=2,fan1=4200,fan2=4320,fan3=0,fan4=0,fan5=0,fan6=0,fan7=0,fan8=0, temp_num=3,temp1=0,T0=0,T0c=0,temp2=0,T1=0,temp3=0,temp4=0,T2=0,temp5=0,T3=0,temp6=0,temp7=0,temp8=0,temp9=0,temp10=0,temp11=0,temp12=0,temp13=0,temp14=0,temp15=0,temp16=0,tempOLI4=0,tempOLI5=0,tempOLI6=0,tempOLI7=0,temp2_1=(null),temp2_2=(null),temp2_3=(null),temp2_4=(null),temp2_5=(null),temp2_6=(null),temp2_7=(null),temp2_8=(null),temp2_9=(null),temp2_10=(null),temp2_11=(null),temp2_12=(null),temp2_13=(null),temp2_14=(null),temp2_15=(null),temp2_16=(null),temp_max=0,temp_max2=0, Device Hardware%=163696265650755762883874206486279682113451099651449903834149508,no_matching_work=86,
chain_acn1=63,chain_acn2=0,chain_acn3=63,chain_acn4=63,chain_acn5=0,chain_acn6=0,chain_acn7=0,chain_acn8=0,chain_acn9=0,chain_acn10=0,chain_acn11=0,chain_acn12=0,chain_acn13=0,chain_acn14=0,chain_acn15=0,chain_acn16=0, chain_acs1= oooooxoo oxoooooo oooooxoo ooooooxo oooooxxx ooooooxo xoooxooo ooooooo, chain_acs2=, chain_acs3= oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo ooooooo, chain_acs4= oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo ooooooo, chain_acs5=,chain_acs6=,chain_acs7=,chain_acs8=,chain_acs9=,chain_acs10=,chain_acs11=,chain_acs12=,chain_acs13=,chain_acs14=,chain_acs15=,chain_acs16=, chain_hw1=83,chain_hw2=0,chain_hw3=0,chain_hw4=3,chain_hw5=0,chain_hw6=0,chain_hw7=0,chain_hw8=0,chain_hw9=0,chain_hw10=0,chain_hw11=0,chain_hw12=0,chain_hw13=0,chain_hw14=0,chain_hw15=0,chain_hw16=0,
chain_rate1=0,chain_rate2=(null),chain_rate3=0,chain_rate4=0,chain_rate5=(null),chain_rate6=(null),chain_rate7=(null),chain_rate8=(null),chain_rate9=(null),chain_rate10=(null),chain_rate11=(null),chain_rate12=(null),chain_rate13=(null),chain_rate14=(null),chain_rate15=(null),chain_rate16=(null), frequency1=600,frequency2=650,frequency3=650|
STATS=1,ID=POOL0,Elapsed=6881,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,GHS 5s=11890.91,GHS av=11796.49,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=8546.00000000,Min Diff=256.00000000,Max Diff=8546.00000000,Min Diff Count=5,Max Diff Count=3951,Times Sent=2235,Bytes Sent=249102,Times Recv=2483,Bytes Recv=363048,Net Bytes Sent=249102,Net Bytes Recv=363048|STATS=2,ID=POOL1,Elapsed=6881,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,GHS 5s=11890.91,GHS av=11796.49,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=0.00000000,Min Diff=0.00000000,Max Diff=0.00000000,Min Diff Count=0,Max Diff Count=0,Times Sent=3,Bytes Sent=201,Times Recv=6,Bytes Recv=2744,Net Bytes Sent=201,Net Bytes Recv=2744|STATS=3,ID=POOL2,Elapsed=6881,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,GHS 5s=11890.91,GHS av=11796.49,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=1024.00000000,Min Diff=1024.00000000,Max Diff=1024.00000000,Min Diff Count=1,Max Diff Count=1,Times Sent=3,Bytes Sent=200,Times Recv=4,Bytes Recv=1502,Net Bytes Sent=200,Net Bytes Recv=1502|
|
each time you send a transaction don't forget to use a new address, each time you receive one also!
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3724
Merit: 2646
Evil beware: We have waffles!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2016, 10:53:41 PM |
|
Um, maybe you should get together with patrike the author of Awesome Miner monitoring software? He seems to have cracked the coding for BMminer as Awesome Miner correctly reports board and chip temps. I LOVE the setting speed per-board idea. Lets us optimize per-board for performance and temps ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
fubly
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 21, 2016, 12:12:48 AM |
|
Um, maybe you should get together with patrike the author of Awesome Miner monitoring software? He seems to have cracked the coding for BMminer as Awesome Miner correctly reports board and chip temps. I LOVE the setting speed per-board idea. Lets us optimize per-board for performance and temps ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) on my mintorro I also had the problems to get the bmminer stats into, but that problem has nothing to do with the main generation of the stats. thx
|
each time you send a transaction don't forget to use a new address, each time you receive one also!
|
|
|
|
gt_addict
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 03, 2016, 07:41:24 PM |
|
Hi there.
Please help me to restore original bmminer. Unfortunately can't use miner without temp monitoring, so will waiting for that.
But can't understand how to downgrade cgminer...
Thanks
Can you not just flash it again from the file on bitmains website under the "support" section?
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
gt_addict
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 03, 2016, 08:19:45 PM |
|
Hi there.
Please help me to restore original bmminer. Unfortunately can't use miner without temp monitoring, so will waiting for that.
But can't understand how to downgrade cgminer...
Thanks
Can you not just flash it again from the file on bitmains website under the "support" section? Sure, but there are no firmware for S9 miner https://www.bitmaintech.com/support.htm?pid=00720160628032419599ebY2YSlj06DEThat might pose a problem ![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
|
gt_addict
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 15, 2016, 10:32:40 PM |
|
Strange how the new S9's come out with firmware that auto-adjusts to find the optimum frequency for each hashboard just like what has been done by a member on here 🤔
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
piwi3910
Newbie
Offline
Activity: 18
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 23, 2016, 10:20:22 PM |
|
anyone know how to get past the invalid firmware message. I wanna try the new gcminer for s9 but when i upload it says invalid firmware.
|
|
|
|
RadekG
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2017, 12:27:07 PM |
|
Strange how the new S9's come out with firmware that auto-adjusts to find the optimum frequency for each hashboard just like what has been done by a member on here 🤔
It is not exactly true. Based ony kernel log it looks that each board has factory-programmed each chip's frequency. Final frequency showed in status is average freq for the whole board.
|
|
|
|
maloner
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 28, 2017, 12:54:59 PM |
|
Does the Bmminer-cgminer492 firmware support latest batch S9 with xilink SoC based controllers?
Thread seems to have gone quiet since they were released?
|
|
|
|
|
zwilla
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2017, 11:05:28 PM Last edit: April 20, 2017, 01:39:03 AM by zwilla |
|
fubly account is hacked. Now I use my domain name as user. And No! I do not add all the changes to my build. If you want stats and not money. Use the orig firmware from bitmain. I optimized the driver for the first generation of S9 over 300 hours and killed by this way 2 x S9. The source by bitmain is a disaster at all. I have a build now for all Xilinx board and also without stats. If you want to see the stats then use your pool. There are the stats. If you have problems with the temp than cool better. The miner stops mining at high temps automatically it is implemented inside the chip! If you have a problem with the noise 1. Stop mining 2. unplug one fan optimized the driverLet me tell you one thing about more hash power from S9. The original firmware by bitmain is talking many times to the controller board like this. Ever 50 microseconds: Hey what temp does chip 1 have and so on to 63 then the driver asks many other bullshit questions. Within this time is it not possible for the bullshit controller to make his job: Sending answers what the asic chips find out! You don't belief it? login via ssh and activate the debug mode. Then you see how the hashrate drops! If you want to get out more then 15% up to 25% contact me but only if you have 100 miners or more. I'm not willing to spend more time without any cent. Sorry! https://the-internet-of-money.de/wp-content/uploads/2017/04/Personal-Messages-Index-BitcoinTalk.jpgand yes he hates me. lol
|
|
|
|
steve1965!
Newbie
Offline
Activity: 30
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 14, 2017, 11:43:46 PM |
|
Cant flash it erases the old software but does not install the new software if I ssh into my s9 there is nothing there no software gone!!!. I have to flash the miner again with the old shitty firmware to get it to work can some one tell me what I am doing wrong ?
|
|
|
|
steve1965!
Newbie
Offline
Activity: 30
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 19, 2017, 03:38:06 PM |
|
I was very impressed by this post, this blog has always been giving pleasant news. Thank you very much for such an interesting post. Keep working, great job! https://acersupport.org/ Yes now only if it worked that would be better!!!
|
|
|
|
bulgar73
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 128
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2017, 09:56:06 PM |
|
Cant flash it erases the old software but does not install the new software if I ssh into my s9 there is nothing there no software gone!!!. I have to flash the miner again with the old shitty firmware to get it to work can some one tell me what I am doing wrong ?
Hi! same for me. S9 firmware ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F6MSnOHl.png&t=665&c=97IsbOKAB2kITA) after reboot cgminer run but only max 7.7TH and "MinerStatus" tab graphics distortion ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) any help ? ---- BTC
|
|
|
|
Top0tun
Newbie
Offline
Activity: 34
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 19, 2017, 04:31:19 PM |
|
suppose thread is dead and developer wont do any updates without $. Use original FW
|
|
|
|
|