Bitcoin Forum
April 26, 2024, 05:16:19 AM *
News: Latest Bitcoin Core release: 27.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: [1] 2 »  All
  Print  
Author Topic: Die 5 RX480 (Reference)  (Read 2220 times)
Stack37 (OP)
Newbie
*
Offline Offline

Activity: 7
Merit: 0


View Profile
August 30, 2016, 07:58:05 AM
Last edit: August 30, 2016, 08:21:10 AM by Stack37
 #1

Hello!
Died 5 cards rx 480 ref(xfx, gyga, 2 powercolor, his) After downloading Windows error thread stuck in device driver. All 5 of the graphics card died in the first 24 hours. The remaining 30 pieces of work from a week to a month. All the cards worked on the same settings. GPU 1130mhz 900mv, memory 2200mhz 900mv. Mining only eth. Flashed the Bios, only the timings. 2 of 5 dead cards were not flashed. Visible damage no. In safe mode is determined (disabled drivers are also).

Could it be because of settings?(Chip 1130mhz 900mv, memory 2200mhz 900mv)


 The monitor sees this picture.
https://pp.vk.me/c604329/v604329301/29def/TAWP1MMW2HI.jpg

Gpu-z other working card on screen.
http://dl1.joxi.net/drive/2016/08/30/0008/1579/542251/51/43c407dbf2.jpg
1714108579
Hero Member
*
Offline Offline

Posts: 1714108579

View Profile Personal Message (Offline)

Ignore
1714108579
Reply with quote  #2

1714108579
Report to moderator
1714108579
Hero Member
*
Offline Offline

Posts: 1714108579

View Profile Personal Message (Offline)

Ignore
1714108579
Reply with quote  #2

1714108579
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
1714108579
Hero Member
*
Offline Offline

Posts: 1714108579

View Profile Personal Message (Offline)

Ignore
1714108579
Reply with quote  #2

1714108579
Report to moderator
1714108579
Hero Member
*
Offline Offline

Posts: 1714108579

View Profile Personal Message (Offline)

Ignore
1714108579
Reply with quote  #2

1714108579
Report to moderator
1714108579
Hero Member
*
Offline Offline

Posts: 1714108579

View Profile Personal Message (Offline)

Ignore
1714108579
Reply with quote  #2

1714108579
Report to moderator
Redrose
Hero Member
*****
Offline Offline

Activity: 756
Merit: 502


View Profile
August 30, 2016, 08:28:02 AM
 #2

First, they're very hot. Also, did you tried to reinstall Windows ? On a bad quality HDD, when I turned off the system, I would block like you. If you find this too painful, you can also try to run the GPUs in another rig, since you have several. All of this is to make sure that they're really dead.
Did you downclocked or overclocked it ?
mikhan
Member
**
Offline Offline

Activity: 84
Merit: 10


View Profile
August 30, 2016, 08:29:07 AM
 #3

they just die, replace it by warranty
Stack37 (OP)
Newbie
*
Offline Offline

Activity: 7
Merit: 0


View Profile
August 30, 2016, 08:47:12 AM
 #4

First, they're very hot. Also, did you tried to reinstall Windows ? On a bad quality HDD, when I turned off the system, I would block like you. If you find this too painful, you can also try to run the GPUs in another rig, since you have several. All of this is to make sure that they're really dead.
Did you downclocked or overclocked it ?
GPU 1130mhz 900mv, memory 2200mhz 900mv
This is 100% not bad hdd. Cards died

5 graphics cards died in different configurations and in no way related. Different power supplies, different sdd drives. All died in the first 24 hours of mining.
eretron
Full Member
***
Offline Offline

Activity: 156
Merit: 100


View Profile
August 30, 2016, 10:53:40 AM
 #5

Interesting, I got 1 died yesterday with same error as yours... It was Sapphire 480 Reference model...

Exactly the same behaviour as yours...

My all GPUs run at 65-70c max, so its not a temp issue...

EDIT: Card died after 5 days of mining

Q_R_V
Sr. Member
****
Offline Offline

Activity: 428
Merit: 250


Inactivity: 8963


View Profile
August 30, 2016, 11:03:11 AM
 #6

More info about motherboard and risers please. Were cards connected directly to the mobo or through risers (what kind of risers, molex connector, berg connector)?
Stack37 (OP)
Newbie
*
Offline Offline

Activity: 7
Merit: 0


View Profile
August 30, 2016, 11:48:48 AM
 #7

More info about motherboard and risers please. Were cards connected directly to the mobo or through risers (what kind of risers, molex connector, berg connector)?
Different configurations:
all rigs windows 10
motheboard - asrock b85 anniversary, H81 PRO BTC
psu - fsp aurum 1000w gold, COUGAR CMX700 700W bronze, Deepcool DA650 650W bronze
powered risers - http://risers.ru/images/riser_PCI_E_1x-16x_power_molex_onboard.jpg
                       https://ae01.alicdn.com/kf/HTB1EP0DLXXXXXa7XXXXq6xXFXXXa/2015-PCI-E-1X-16X-Flexible-Extension-PCI-Express-1-to-16-X-Adapter-PCI-E.jpg_220x220.jpg

A dead card is replaced by working in the same place and work well
eretron
Full Member
***
Offline Offline

Activity: 156
Merit: 100


View Profile
August 30, 2016, 12:55:27 PM
 #8

Yup. Same here

H81 btc asrock, connected via USB Riser, 750W cooler master PSU.

This rig had 3x rx480 undervolted to:

800mA@1000mhz core clock with mem clocked at 2000

GPU Had artifacts on half of the screen when conected to monitor via hdmi. And with that card connected winodws eould always celrash during boot. RMAed waiting for replacement card to return.

Stack37 (OP)
Newbie
*
Offline Offline

Activity: 7
Merit: 0


View Profile
August 30, 2016, 01:00:59 PM
 #9

Yup. Same here

H81 btc asrock, connected via USB Riser, 750W cooler master PSU.

This rig had 3x rx480 undervolted to:

800mA@1000mhz core clock with mem clocked at 2000

GPU Had artifacts on half of the screen when conected to monitor via hdmi. And with that card connected winodws eould always celrash during boot. RMAed waiting for replacement card to return.
Maybe the reason downvolt?

I have 30 pieces of work from a week to a month.
How many cards do you have?
eretron
Full Member
***
Offline Offline

Activity: 156
Merit: 100


View Profile
August 30, 2016, 01:08:49 PM
 #10

9pcs

philipma1957
Legendary
*
Offline Offline

Activity: 4102
Merit: 7764


'The right to privacy matters'


View Profile WWW
August 30, 2016, 02:13:25 PM
 #11

both of you have risers on the dead cards am I correct?


I have 20 cards all good all have no risers.

My guess is it is a riser issue.

▄▄███████▄▄
▄██████████████▄
▄██████████████████▄
▄████▀▀▀▀███▀▀▀▀█████▄
▄█████████████▄█▀████▄
███████████▄███████████
██████████▄█▀███████████
██████████▀████████████
▀█████▄█▀█████████████▀
▀████▄▄▄▄███▄▄▄▄████▀
▀██████████████████▀
▀███████████████▀
▀▀███████▀▀
.
 MΞTAWIN  THE FIRST WEB3 CASINO   
.
.. PLAY NOW ..
zcrewsmok
Newbie
*
Offline Offline

Activity: 7
Merit: 0


View Profile
August 30, 2016, 02:22:23 PM
 #12


800mA@1000mhz core clock with mem clocked at 2000


And what were the vram timings? default? https://pp.vk.me/c630716/v630716944/4968c/QkL9uTMphN0.jpg
zcrewsmok
Newbie
*
Offline Offline

Activity: 7
Merit: 0


View Profile
August 30, 2016, 02:37:51 PM
 #13

I have 20 cards all good all have no risers.

Number of rigs should be under 20 cards? What motherboard?
eretron
Full Member
***
Offline Offline

Activity: 156
Merit: 100


View Profile
August 30, 2016, 03:18:00 PM
 #14


800mA@1000mhz core clock with mem clocked at 2000


And what were the vram timings? default? https://pp.vk.me/c630716/v630716944/4968c/QkL9uTMphN0.jpg
Yes. Default timings. All settings were done in wattmann with stock BIOS on all cards.

Redrose
Hero Member
*****
Offline Offline

Activity: 756
Merit: 502


View Profile
August 30, 2016, 06:29:08 PM
 #15

both of you have risers on the dead cards am I correct?


I have 20 cards all good all have no risers.

My guess is it is a riser issue.

So funny Phil, this attack against risers Cheesy. Though I'll listen to you for my next rig, by not using any riser and placing all the cards on a motherboard, for now all my cards except two cards are connected throught risers and I never had any problem.
Cryptozillah
Hero Member
*****
Offline Offline

Activity: 687
Merit: 502


View Profile
August 30, 2016, 06:38:30 PM
 #16

As long as you run one riser per powerline you should be ok, two per powerline is a 100% fail, just a question about when it is time for a meltdown.
I now run my rigs with 4 x 480 (custom bios 30.5Mhs/gpu) on H81 BTC Pro boards, one riser per rail and they dont get that hot.
eretron
Full Member
***
Offline Offline

Activity: 156
Merit: 100


View Profile
August 30, 2016, 06:49:19 PM
 #17

The riser was the only thing powered from that powerline so that's not an issue.

BTW nothing was melted or eaven hot to touch.

reb0rn21
Legendary
*
Offline Offline

Activity: 1896
Merit: 1024


View Profile
August 30, 2016, 07:16:01 PM
 #18

If the screen have "garbage" and GPU is booting up, defo its a memory problem

Could be a bad batch of memory used, try to find out which memory was used on those cards, there were reports on bad batch of micron chips with MSI Gaming X 1070 card, they were canceled

I had one MSI gaming 1070 die on my, but it just blown up, prolly VRM dies, bad components

              ▄▄▄ ▀▀▀▀▀▀▀▀▀ ▄▄▄
           ▄▀▀    ▄▄▄▄▄▄▄▄▄    ▀▀▄
        ▄▀▀  ▄▄▀█          ▀█▀▄▄  ▀▀▄
      ▄▀▀ ▄▄▀    ▀▀▄▄▄▄▄▄▄▀▀    ▀▄▄ ▀▀▄
     █   █            ▀            █   █
   ▄▀ █  ▀▄▄                     ▄█▀  █ ▀▄
  ▄▀ ▄▀ █▄ ▀▀▀██▄▄▄       ▄▄▄██▀▀  ██ ▀▄ ▀▄
  ▀▄▀▀▄ ██ ▄▄▄▄▄▄  ▀▄   ▄▀  ▄▄▄▄▄▄ ██ ▄▀▀▄▀
 ██   █ ██ ▀▄    ▀▄ █   █ ▄▀    ▄▀ ██ █  ▀██
 █  ▄█  ▀█  ▀▀▀▀▀▀▀ █   █ ▀▀▀▀▀▀▀  █   █▄  █
█▀ █  █  █          █   █          █  █  █ ▀▀
 █▀  ▄▀  █▀▄        █   █        ▄▀█  ▀▄  ▀█
 ▄  █▀   █ ▀█▄      ▀   ▀      ▄█▀ █  ▄▀█  ▄
 █▄▀  █  █                         █  █  ▀▄█
 ▀▄  █   ▀█        ▄▄▀▄▀▄▄        █▀   █  ▄
  ▀▄▀▀  █▄ █     ▀█  ▀▀▀  █▀     █ ▄█ ▄▀▀▄▀
   ▀ ▄  ██ █▀▄     ▀▀▄▄▄▀▀     ▄▀█ ██ ▀▄ ▀
    ▀█  ██ █ █▀▄    ▄▄▄▄▄    ▄▀█ █ ██  █▀
      ▀▄ ▀ █ █ ██▄         ▄██ █ █ ▀ ▄▀
        ▀▄ █ █ █ ▀█▄     ▄█▀ █ █ █ ▄▀
          ▀▀▄█ █    ▀▀▀▀▀    █ █▄▀▀
              ▀▀ ▄▄▄▄▄▄▄▄▄▄▄ ▀▀
   
..I  D  E  N  A..
   
Proof-of-Person Blockchain

Join the mining of the first human-centric
cryptocurrency
 



 
▲    2 3 2 2

..N  O  D  E  S..
   
                ██
                ██
                ██
                ██
                ██
         ▄      ██      ▄
         ███▄   ██   ▄███
          ▀███▄ ██ ▄███▀
            ▀████████▀
              ▀████▀
                ▀▀
██▄                            ▄██
███                            ███
███                            ███
███                            ███
 ███▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄███
  ▀▀██████████████████████████▀▀
   
D O W N L O A D

Idena node

   
   
▄▄▄██████▄▄▄
▄▄████████████████▄▄
▄█████▀▀        ▀▀█████▄
████▀                ▀████
███▀    ▄▄▄▄▄▄▄▄▄       ▀███
███      █   ▄▄ █▀▄        ███
██▀      █  ███ █  ▀▄      ▀██
███       █   ▀▀ ▀▀▀▀█       ███
███       █  ▄▄▄▄▄▄  █       ███
███       █  ▄▄▄▄▄▄  █       ███
██▄      █  ▄▄▄▄▄▄  █      ▄██
███      █          █      ███
███▄    ▀▀▀▀▀▀▀▀▀▀▀▀    ▄███
████▄                ▄████
▀█████▄▄        ▄▄█████▀
▀▀████████████████▀▀
▀▀▀██████▀▀▀
   
    .REQUEST INVITATION.
Ambros
Hero Member
*****
Offline Offline

Activity: 653
Merit: 500


View Profile
August 30, 2016, 07:20:12 PM
 #19

If the screen have "garbage" and GPU is booting up, defo its a memory problem

Could be a bad batch of memory used, try to find out which memory was used on those cards, there were reports on bad batch of micron chips with MSI Gaming X 1070 card, they were canceled

I had one MSI gaming 1070 die on my, but it just blown up, prolly VRM dies, bad components

They replace that kind of failure on warranty ?
B1tUnl0ck3r
Sr. Member
****
Offline Offline

Activity: 854
Merit: 277

liife threw a tempest at you? be a coconut !


View Profile
August 30, 2016, 07:27:51 PM
 #20

both of you have risers on the dead cards am I correct?


I have 20 cards all good all have no risers.

My guess is it is a riser issue.

Good hypothesis... but still not a good news.

Thank you very much for sharing OP. the reliability issue is very important...

And it seems that the issue is more widespread than I expected  Undecided.

When the people of the world will get that covid was intentionally released to frame china, steal the election from trump, assure massive bail outs and foster the forced vaccination agendas...they will forget, like 911, wmds in irak, uss liberty or pedogate.
Pages: [1] 2 »  All
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!