Low Cost DIY ASIC MinerPurpose:This thread is intended for the development of a very low cost DIY open source
ASIC miner based on Avalon's chips. Hopefully, it will inspire other Bitcoin ASIC
manufactures to offer their chips as well.
Objectives:* Get ASICs in the hands of the masses ASAP.
* Create the cheapest solution possible. The lowest possible price is the goal.
The $ per hash ratio is not expected to be the best.
* Make it simple enough that anyone with a DIY spirit can assemble one of these with
some simple low priced tools.
https://www.sparkfun.com/tutorials/category/2DIY manufacturing may be an avenue to get these out much faster.
Expect a few hours assembly time per board.
*Make the PCB design that is not only DIY friendly, but mass production friendly as well.
It will use surface mount technology.
*Inspire more ASIC Bitcoin Mining manufactures to pop up all over the world (Decentralization).
ASIC manufacturing in general is the most complicated production process in the world.
IMO, the best thing for Bitcoin would be for ASIC Bitcoin Manufactures to be decoupled from
final product production; or at least offer their chips as well on top of their final products.
Specifications (subject to change):* USB power source is all that is required.
* Utilizes a single Avalon ASIC
* 256+ MH/s
* 2 Watt maximum power usage
* TYPE A USB Male option on either side of the PCB
* Type B USB Female option
* More to come
Sponsors:*Burnin - He is a serious manufacture of Bitcoin mining equipment. He has committed to helping
with the open source software/firmware to make this project function. He has started an official
thread for his miners and it's worth checking out:
https://bitcointalk.org/index.php?topic=179769.0*Zefir - He is preordaining Avalon ASICs in smaller quantities for anyone interested:
funds:
https://bitcointalk.org/index.php?topic=177827.0Zefir is committed to helping this low cost DIY project be successful by making a small quantity
of chips available for ordering and development.
Team:All of you! An open source design also means its open to anyone. Feel free to take the initiative
to help out in your own way. Please don't get discouraged as it may take time to figure
out where your talents fit in best. I have received an overwhelming quantity of supportive emails
and also many request to help out. I wasn't prepared for that, but now, I would like to make
a list of anyone that wants to get involved here and what they would like to bring to the table.
Shoot me ANOTHER email and I will add you name here."Someone42" who was the inspiration and pioneer in hardware wallets has offered his help here.
"Burnin" has also offered his help, but is also very busy as he is preparing his own miner.
Allten's Commitment:I will engineer the schematic and the PCB. As soon as the chip specifications are available, I will
release within a week a preliminary design for feedback. I will personally manufacture enough
of these to get them in the hands of all those that will be helping with firmware/software development.
After that, a detailed tutorial will be made on how to order and produce these by yourself.
Important note: I do not want to become a distributor for these for the simple fact I would like
to have time available for other projects I'm passionate about. This is a golden opportunity for anyone
or a few people to become distributors of DIY kits and already assembled miners. I will assist anyone
to get set up for this once I've completed the tutorial.
Funding:Sending some coins would be very helpful and greatly appreciated.
1AqEzSiw7aqZ7T53XvXMqrcnUD5tKcvJxPWhat will donations cover? Enough to order the parts and PCBs for the initial boards used for development.
All extra will be used to drive bounties for software/firmware development.
I get the feeling that many have ordered chips with confidence that there will be a PCB solution
readily available before the ASICs arrive. If that is the case, consider donating up to 5% of
what you invested in chips to this project. It would sure help hurry it a long! Much of the bounty portion
may go to "burnin" as his code development for the controller portion will be shared with this project and
he is most heavily invested to make it work along with his product ASAP.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ OLD - For Reference ~~~~~~~~~~~~~~~~~
Update: April 15th 2013
A huge thank you to Avalon for making their chips available. This is a great step in the
right direction for Bitcoin! Hopefully ASICMiner, BFL, and future ASIC manufactures will
follow their lead someday.
Looks like we will still be waiting a little bit longer for some more detailed spec's, but
thanks to Burnin's help, he has shown me that the design is adequate so I'm going
forward with a BOM (Bill of Materials) and a preliminary schematic for everyone's
review.
Here's the BOM:
https://www.dropbox.com/s/45698vk7bpvbdkp/BOM.xlsUpdate: April 3rd 2013
we are not looking for investors, and unfortunately batch #3 is sold out at the moment, this means you can do a few things
1. wait till when we finish installing our SMT line and see our production capacity and decide if we were to do another batch or not. ( late April )
2. wait for us to finish our documentation and start selling the Avalon ASIC chips which you can built your own mining machines with. ( mid April )
Currently we don't want any money.
Thanks for querying though,
Cheers.
Update: April 1st 2013
Project is at a stand still until more details are released regarding
AVALON ASICs. I was hoping to encourage BitSyncom to just
give us a few preliminary details in the forum so we could make
sure the hardware design was appropriate. Unfortunately,
That has not happened.
Instead of waiting until complete and official Spec's are available
online I would like to ask anyone with an AVALON that has skills
with an oscilloscope and ohm meter to please help with this.
Shouldn't take too long.
I wanted to offer a bounty, but then I remembered anyone with
an Avalon probably wouldn't be motivated for anything less than
a Bitcoin.
Here are the spec's available so far:
https://en.bitcoin.it/wiki/Avalon#Chip_SpecificationWhat is needed?
1) Pin out for all 48 pins. What pins are ground? What Pins are power? Clock pins? Data pins? etc.
2) Do the ASICs have a frequency multiplier? What is the frequency on the core clock pin? Internal
core clocked is spec'ed around 256 MHZ
3) What is the data bandwidth on the clock/data lines? Just need to know what the clock
frequency is for the clock pins and that would be sufficient.
Bonus: are there any serial communication protocols being used: SPI, I2C, Proprietary, etc.?
Thanks!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Building a DIY Open Source ASIC PCB based on AVALON ASICs
Time is of the essence [obviously] and hoping there will be
a lot of talent that can help make this happen with respect to Firmware
and software. So far its just me with one other who has expressed
interest in an email.
The design is kept as simple and cheap as possible and components were
selected that would be easy to solder. The only difficult soldering
task would be the ASIC themselves and would require oven reflow
(or a skillet). People could get the ASICs pre soldered by someone else
if they don't feel comfortable giving it a try. There will be a tutorial on how
to do a seemingly challenging ASIC soldering job with few tools for those willing to try.
Why do this?
"MiniMiner would be great, and an excellent way to introduce new people to Bitcoin.
A low cost device with a nice, simple, user interface could really broaden the market.
I think there's something about mining that really gets people hooked and interested
in learning more." - Anonymous
Also, it was a tragedy (even though inevitable and necessary) IMO when custom
hardware started to come forth. In the GPU and CPU phase where anyone could learn
about it and be mining at the end of the day was a unique period that hooked many
into Bitcoin. I would like to help lower entry to competitive mining with this project.
Why Avalon?
I was inspired by the article about Yifu.
http://motherboard.vice.com/blog/engineering-the-bitcoin-gold-rush-an-interview-with-yifu-guo-creator-of-the-first-asic-based-minerThey are the only ones I trust to be supportive of a project like this. Even with BFL
rolling out their hardware soon and a 28nm ASIC to hit the market later this year,
this is still essential and could pave the way for other ASIC manufactures to consider
releasing their ASIC interface designs and sell just the chips.
I'm much more of a hardware guy and have not been involved at all with any Bitcoin
mining hardware before so I do not know if the design is appropriate.
Please chime in and help me see what's missing and what needs changed.
A schematic will be available in a day or two depending on the feedback received.
I'm hoping the Avalon team will take a moment and give their feedback as well.
Here's the chip Specification that I have found so far:
https://en.bitcoin.it/wiki/Avalon#Chip_SpecificationMy two biggest design hurdles at the moment:
1)Frequency driver for the Avalon ASIC. What is the input frequency?
I assume it has a clock multiplier, but if not I will need to reconsider that portion of
the design.
2) Having no idea how work is passed to the chip, would 8 data lines with a frequency
of 48 MHz cause a bottleneck? If so, by how much?
Here's a diagram for inspiration. It will give an idea to everyone (technical and non-technical) of what I'm thinking:
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi1148.photobucket.com%2Falbums%2Fo575%2Fmqpickens%2FDIYASICAvalongMiner_V2-FirstPitch_zps7ae16fe5.jpg&t=665&c=V3P7sX8_UeEMSQ)