Open Source ZEC (ZCash) GPU Miner AMD & NVidia (up to 45 sol/s on RX480)

[aleksfox]

It seems that the increase in the number of instances to 3 in the configuration - gives a small increase compared to the 2.
I have around 4-5 sol +

[1714506085]

1714506085

[1714506085]

1714506085

[1714506085]

1714506085

[1714506085]

1714506085

[weekend40]

@eXtremal
Please lower my payout threshold from 0.01 ZCASH  to 0.005 ZCASH
http://coinsforall.io/#!/coin/ZCASH/wallet/t1XaNVvraept1r3o5npiRh4crvCYCEeJDuq

Thanks you !

[muleman8]

It seems that the increase in the number of instances to 3 in the configuration - gives a small increase compared to the 2.
I have around 4-5 sol +

I can only run it with instances of 1  

Its also odd because when mining eth my GPU's hover around 70 degrees.  Mining zec with this miner they only hover around 49 degrees.... I assume we are leaving alot of GPU capacity spare with this miner?

[eXtremal]

@eXtremal
Please lower my payout threshold from 0.01 ZCASH  to 0.005 ZCASH
http://coinsforall.io/#!/coin/ZCASH/wallet/t1XaNVvraept1r3o5npiRh4crvCYCEeJDuq

Thanks you !

All requests about Z-addresses, lowering threshold please send to email from first post

[lttsi]

@eXtremal coinsforall.io/#!/coin/ZCASH/wallet/t1e55Tj6kRBsc8J6MT5HBM2D6kTUjxBYUfx ,please pay all request balance please .
And please improve the silent miner for Nvi ,my rig 1060 got a 16 slot /1 card ,very slow speed anb can't run the silent miner ..got the crash

[mmedinas]

@extremal

please lower my payout threshold from 0.01 ZCASH  to 0.005 ZCASH


http://coinsforall.io/#!/coin/ZCASH/wallet/t1VaRxKKoHFQPVB5j3K6shYLTrg2SZuLUWh

Thanks

[muleman8]

Just want to say I have received a second payment so payments are coming in - thanks extremal 

[z0n0]

Hi allz i have amost the same problem like @lpedretti. Using zcashgpuclient_silentarmy build from git for ubuntu 14.04.
rig1   GPU   4   39 ms   0 C°   27.515 sols/s    2 cards
rig2   GPU   4   39 ms   0 C°   27.211 sols/s    2 cards
rig3   GPU   4   39 ms   0 C°   27.713 sols/s    2 cards
rig4   GPU   2   36 ms   0 C°   25.237 sols/s    1 card

I cant understand why the rig with 1 card make almost the same like theese with 2 cards

config rig4
server = "coinsforall.io";
port = "6668";
address ="t1WAhAPgwbk8J3rHAfwbHHAggg2QjuBM7Lt";
name ="rig4";
platform="amd";
onCrash="0";
devices=["1"];
worksizes=["256"];
threads   =["8192"];
corefreq  =["-1"];
memfreq   =["-1"];
powertune =["-1"];
fanspeed =["-1"];

configs rig 1-3
server = "coinsforall.io";
port = "6668";
address ="t1WAhAPgwbk8J3rHAfwbHHAggg2QjuBM7Lt";
name ="rig1";
platform="amd";
onCrash="0";
instances="2";//tryed with and without it no change
devices=["1","1"];
worksizes=["256","256"];
threads   =["8192","8192"];
corefreq  =["-1","-1"];
memfreq   =["-1","-1"];
powertune =["-1","-1"];
fanspeed =["-1","-1"];

Please someone help me, 10x in advance

I have the same issue and can't figure it out.
What are the differences on rig itself (CPU, system RAM, OS,...)?

[evilfreak]

Hi allz i have amost the same problem like @lpedretti. Using zcashgpuclient_silentarmy build from git for ubuntu 14.04.
rig1   GPU   4   39 ms   0 C°   27.515 sols/s    2 cards
rig2   GPU   4   39 ms   0 C°   27.211 sols/s    2 cards
rig3   GPU   4   39 ms   0 C°   27.713 sols/s    2 cards
rig4   GPU   2   36 ms   0 C°   25.237 sols/s    1 card

I cant understand why the rig with 1 card make almost the same like theese with 2 cards

config rig4
server = "coinsforall.io";
port = "6668";
address ="t1WAhAPgwbk8J3rHAfwbHHAggg2QjuBM7Lt";
name ="rig4";
platform="amd";
onCrash="0";
devices=["1"];
worksizes=["256"];
threads   =["8192"];
corefreq  =["-1"];
memfreq   =["-1"];
powertune =["-1"];
fanspeed =["-1"];

configs rig 1-3
server = "coinsforall.io";
port = "6668";
address ="t1WAhAPgwbk8J3rHAfwbHHAggg2QjuBM7Lt";
name ="rig1";
platform="amd";
onCrash="0";
instances="2";//tryed with and without it no change
devices=["1","1"];
worksizes=["256","256"];
threads   =["8192","8192"];
corefreq  =["-1","-1"];
memfreq   =["-1","-1"];
powertune =["-1","-1"];
fanspeed =["-1","-1"];

Please someone help me, 10x in advance

I have the same issue and can't figure it out.
What are the differences on rig itself (CPU, system RAM, OS,...)?

All rigs Ubutnu 14.04, all video drivers same, build in same way mining software from git. All videocards r9 290 8gb vram, all system 4gb ddr ram
rig 1-3 sempron
rig 4 celeron
on eth there was no difference between rig1,2,3,4. rig4 does exacly 1/2 of what does every of other tree rigs

[faaa]

Move to genoil 0.4.2 
Coinforall not profit. My 280x got 32.55 S/s you can mining in flypool or supernova

[markiz73]

Hi Extremal - could you please set my payout to .005

http://coinsforall.io/#!/coin/ZCASH/wallet/t1f6K8TsJy61EbLkNCyKhqhV1qGC4v6FW78

thanks

[gross]

My rigs have 230-240 Sol/s , they mined 0.02 ZEC in 5-6 hours yesterday but today they get 0.01 ZEC in over 12 hours WTF   

[muleman8]

Move to genoil 0.4.2 
Coinforall not profit. My 280x got 32.55 S/s you can mining in flypool or supernova

genoil crashes windows 10 rigs

[Termie]

With Windows 7/64 I also can´t really notice the "SilentArmy" effect... The pic below shows my RIG with

1x R9 290x - mining with 1 silent army CMD task, 2 (fine working) instances at miner config > almost 30 sol
3x R9 Nano - splitted to 2 silent army CMD tasks, each with 1 instance at miner config > converted only ~32 sol per card
(no difference if I set the Nano configs to 2 instances > 3 GPUs working, 3 crashed, same hashing result)



compared to the single 290x, a really bad result for the 3 Nanos.
Also because I read today at Github/Silentarmy that Nanos can reach up to 45.7 Sol/s with one Nano.
Or is this related to the new v2 release which was uploaded 9 hours ago and which isn´t available as Windows binary yet?




 

[gross]

Block 1735 Timestamp Mon 31 Oct 2016 03:25:45 ICT (15 hours ago) Difficulty 51742.05351649
Block 2091 Timestamp Mon 31 Oct 2016 18:20:00 ICT (26 minutes ago) Difficulty 48030.02720516
But earning is = 1/4 yesterday WTF

[gross]

Move to genoil 0.4.2 
Coinforall not profit. My 280x got 32.55 S/s you can mining in flypool or supernova

My GPU only work 85-87%. What's your command ?

[ps_jb]

Hello,

Please proceed the payment:

http://coinsforall.io/#!/coin/ZCASH/wallet/t1PZdwMYbPBuhswESX9yPDCS1XNPHBDgU4f

Thank you!

[TimeTeller]

4 hours ago you said.....

It seems, pool finish all delayed payments, only invalid and Z-addresses in queue now, no more long (more that ~2 hours) delay to move your ZEC from requested to paid

4 hours ago i asked again

Dear eXtremal,

could you pls make pament for http://coinsforall.io/#!/coin/ZCASH/wallet/t1b3hhhw8iST8gHxmBkEphzJxn3nPqHyKAN

it is already in requested and waiting

thanks in advanced

and to keep this thread in balance and in check one more time    ------

Dear eXtremal,

could you pls make pament for http://coinsforall.io/#!/coin/ZCASH/wallet/t1b3hhhw8iST8gHxmBkEphzJxn3nPqHyKAN

it is already in requested and waiting

thanks in advanced


EDIT=

if you ask me to return and mine on your pool ; i will have to say no simply for the fact that this is incorrect behavior as a pool operator/owner or whatever---

[tiCeR]

eXtremal:

Could you please do a manuell payout for this address?

ZCASH: t1bZa8HYqqxHEVB4meQG5tmYnknAdU433Cd

I wont reach the 0.01 that fast and really would love to get that value.

Thank you very much

[xgtele]

I confirm that my all mined coins have been received from the pool.

@eXtremal, SILENTARMY v2 now supports GCN 1st gen GPU -- pls update your miner.


Thanks!