Genoil's ZEC miner: AMD ZCash miner for Windows - 0.6

[FlensGold]

This software is running stable with my Sapphire RX480 Nitro+ 4GB on stock BIOS with approx. 25-27sol/s.

Unfortunately I have several Rigs with those GPUS having a modded BIOS running at a hosting service. Although I can access the miner I am not able to reflash the GPUs via Teamviewer properly. Is there any chance to set them to "stock BIOS values" by settings?
With the mod. BIOS the mining software crashes very fast.

which pool you?

https://zec.nanopool.org/

[Coyn]

The Genoil miner is more than perfect. Thank you for helping us with this miner.
I was able to get 45+ sol today on my machine with RX 480 Nitro+ 8GB.
Using -K zec zec zec and windows 7. But there is a new problem.
One of my cards is giving me error 43.

Some people say it cant be fixed, can someone help me?

http://imgur.com/a/f8Tfr

[toptek]

his my R9 280 not the x version on https://www2.coinmine.pl/zec/ with no cpu coes on i;ll turn them on once i replace the cpu cooler .so it gona hit close to  40 with cpu cores and it never run that good on flyppool and i want to use flypool that's after a few hours , i still working on my 470 rig 3 cards i had to reformat due to many error and crashes and disconnects.


16:07:03 pool : submitted and accepted
16:07:07 main : zec-sa#0: 32.9S/s       total: 32.9S/s
16:07:12 main : zec-sa#0: 33.3S/s       total: 33.3S/s
16:07:17 main : zec-sa#0: 31.1S/s       total: 31.1S/s
16:07:22 main : zec-sa#0: 32.5S/s       total: 32.5S/s

[YIz]

0.6 suffers from the very same stability issues. works nicely when I start it, come back after an hour an all cards are showing 0.0Sol/s.

The same is true here.
which pool you?

Nanopool and flypool.

[marvykkio]

 
with this version 0.6 and extraction impossible, every 10 minutes one or more gpu stop extract, salt me nervous

[zawawa]

0.6 suffers from the very same stability issues. works nicely when I start it, come back after an hour an all cards are showing 0.0Sol/s.

Use the -f 2 option and a goto loop in the batch file. I also have a watchdog daemon to monitor power consumption of my rigs and restart them when the power consumption is too low. Works like a charm. I'm getting 35-40 sol/s stable with RX 480 and 0.6.

[rednoW]

0.6 suffers from the very same stability issues. works nicely when I start it, come back after an hour an all cards are showing 0.0Sol/s.

Use the -f 2 option and a goto loop in the batch file. I also have a watchdog daemon to monitor power consumption of my rigs and restart them when the power consumption is too low. Works like a charm. I'm getting 35-40 sol/s stable with RX 480 and 0.6.

tested 0.6 with -f 2 option. It works bad, returned to 0.5 with modded kernel and power shell script.

[Ambros]

0.6 suffers from the very same stability issues. works nicely when I start it, come back after an hour an all cards are showing 0.0Sol/s.

Use the -f 2 option and a goto loop in the batch file. I also have a watchdog daemon to monitor power consumption of my rigs and restart them when the power consumption is too low. Works like a charm. I'm getting 35-40 sol/s stable with RX 480 and 0.6.

35/40 ? Do u overlock ? I am getting 30

[zawawa]

0.6 suffers from the very same stability issues. works nicely when I start it, come back after an hour an all cards are showing 0.0Sol/s.

Use the -f 2 option and a goto loop in the batch file. I also have a watchdog daemon to monitor power consumption of my rigs and restart them when the power consumption is too low. Works like a charm. I'm getting 35-40 sol/s stable with RX 480 and 0.6.

tested 0.6 with -f 2 option. It works bad, returned to 0.5 with modded kernel and power shell script.

You just need to restart the miner in the batch file when it craps out. It's that simple.

[zawawa]

0.6 suffers from the very same stability issues. works nicely when I start it, come back after an hour an all cards are showing 0.0Sol/s.

Use the -f 2 option and a goto loop in the batch file. I also have a watchdog daemon to monitor power consumption of my rigs and restart them when the power consumption is too low. Works like a charm. I'm getting 35-40 sol/s stable with RX 480 and 0.6.

35/40 ? Do u overlock ? I am getting 30

I am using my own modded BIOS. I tried Boysie's for ETH first, but the rig was pretty unstable.

[36524s]

0.6 suffers from the very same stability issues. works nicely when I start it, come back after an hour an all cards are showing 0.0Sol/s.

Use the -f 2 option and a goto loop in the batch file. I also have a watchdog daemon to monitor power consumption of my rigs and restart them when the power consumption is too low. Works like a charm. I'm getting 35-40 sol/s stable with RX 480 and 0.6.

Can you share that script?

[zawawa]

0.6 suffers from the very same stability issues. works nicely when I start it, come back after an hour an all cards are showing 0.0Sol/s.

Use the -f 2 option and a goto loop in the batch file. I also have a watchdog daemon to monitor power consumption of my rigs and restart them when the power consumption is too low. Works like a charm. I'm getting 35-40 sol/s stable with RX 480 and 0.6.

Can you share that script?

The batch file is quite simple:

:loop
genoil.exe -f 2 ...
goto loop

The script for the watchdog daemon wouldn't be useful for you as it remotely controls Wifi power outlets. I was sick and tired of running around in my apartment and keep rebooting my rigs, you know.

[Tmdz]

.6 is broken with my 470s

When I start it, it will just hang at 0 s/s or simply crash out.  Maybe drivers?

Works fine with 290s and 7950.

[navydude]

So is this how my .bat file will look for a simple restart loop?

:loop
genoil.exe -c zec.suprnova.cc:2142 -u navydude.rig3 -p x -i 20 -w 64 -P 0 -z 1 -f 2
goto loop



I have tried a few and keeps locking my rig up.
Would like to restart miner when a gpu fails or shows 0. Loosing many sol's when this happens.

[zawawa]

So is this how my .bat file will look for a simple restart loop?

:loop
genoil.exe -c zec.suprnova.cc:2142 -u navydude.rig3 -p x -i 20 -w 64 -P 0 -z 1 -f 2
goto loop



I have tried a few and keeps locking my rig up.

Looks OK to me. You probably need to lower the intensity.

[navydude]

Is that why my cards keep showing 0 after 20 or 30 mins? I have 380x 4gb with 4 and 8 gb ram rigs.

This is what my cards look like @ -i 20

6:22:53 main : zec-sa#0: 21.8S/s       zec-sa#1: 19.8S/s       zec-sa#2: 20.2S/s       zec-sa#3: 18.4S/s       zec-sa#4: 31.0S/s       total: 111.1S/s
16:22:58 main : zec-sa#0: 28.6S/s       zec-sa#1: 24.8S/s       zec-sa#2: 26.8S/s       zec-sa#3: 19.0S/s       zec-sa#4: 28.4S/s       total: 127.4S/s
16:23:03 main : zec-sa#0: 23.2S/s       zec-sa#1: 19.2S/s       zec-sa#2: 20.8S/s       zec-sa#3: 22.0S/s       zec-sa#4: 25.6S/s       total: 110.7S/s
16:23:08 main : zec-sa#0: 23.2S/s       zec-sa#1: 23.6S/s       zec-sa#2: 25.4S/s       zec-sa#3: 24.8S/s       zec-sa#4: 27.2S/s       total: 124.0S/s
16:23:13 main : zec-sa#0: 18.0S/s       zec-sa#1: 21.7S/s       zec-sa#2: 24.7S/s       zec-sa#3: 22.1S/s       zec-sa#4: 27.3S/s       total: 113.9S/s
16:23:18 main : zec-sa#0: 24.0S/s       zec-sa#1: 16.8S/s       zec-sa#2: 20.8S/s       zec-sa#3: 22.8S/s       zec-sa#4: 24.4S/s       total: 108.7S/s
16:23:23 main : zec-sa#0: 18.2S/s       zec-sa#1: 21.8S/s       zec-sa#2: 23.8S/s       zec-sa#3: 21.8S/s       zec-sa#4: 27.6S/s       total: 113.1S/s
16:23:28 main : zec-sa#0: 22.5S/s       zec-sa#1: 22.1S/s       zec-sa#2: 19.9S/s       zec-sa#3: 23.5S/s       zec-sa#4: 24.3S/s       total: 112.2S/s
16:23:33 main : zec-sa#0: 23.8S/s       zec-sa#1: 20.8S/s       zec-sa#2: 16.6S/s       zec-sa#3: 24.2S/s       zec-sa#4: 23.2S/s       total: 108.4S/s
16:23:38 main : zec-sa#0: 23.6S/s       zec-sa#1: 21.0S/s       zec-sa#2: 21.8S/s       zec-sa#3: 23.4S/s       zec-sa#4: 29.2S/s       total: 118.8S/s

[freebutcaged]

Any version for Win7 build 32 bit that I could use?

[navydude]

Lowered to -i 18. Now lets see what happens.

[zawawa]

Is that why my cards keep showing 0 after 20 or 30 mins? I have 380x 4gb with 4 and 8 gb ram rigs.

This is what my cards look like @ -i 20

6:22:53 main : zec-sa#0: 21.8S/s       zec-sa#1: 19.8S/s       zec-sa#2: 20.2S/s       zec-sa#3: 18.4S/s       zec-sa#4: 31.0S/s       total: 111.1S/s
16:22:58 main : zec-sa#0: 28.6S/s       zec-sa#1: 24.8S/s       zec-sa#2: 26.8S/s       zec-sa#3: 19.0S/s       zec-sa#4: 28.4S/s       total: 127.4S/s
16:23:03 main : zec-sa#0: 23.2S/s       zec-sa#1: 19.2S/s       zec-sa#2: 20.8S/s       zec-sa#3: 22.0S/s       zec-sa#4: 25.6S/s       total: 110.7S/s
16:23:08 main : zec-sa#0: 23.2S/s       zec-sa#1: 23.6S/s       zec-sa#2: 25.4S/s       zec-sa#3: 24.8S/s       zec-sa#4: 27.2S/s       total: 124.0S/s
16:23:13 main : zec-sa#0: 18.0S/s       zec-sa#1: 21.7S/s       zec-sa#2: 24.7S/s       zec-sa#3: 22.1S/s       zec-sa#4: 27.3S/s       total: 113.9S/s
16:23:18 main : zec-sa#0: 24.0S/s       zec-sa#1: 16.8S/s       zec-sa#2: 20.8S/s       zec-sa#3: 22.8S/s       zec-sa#4: 24.4S/s       total: 108.7S/s
16:23:23 main : zec-sa#0: 18.2S/s       zec-sa#1: 21.8S/s       zec-sa#2: 23.8S/s       zec-sa#3: 21.8S/s       zec-sa#4: 27.6S/s       total: 113.1S/s
16:23:28 main : zec-sa#0: 22.5S/s       zec-sa#1: 22.1S/s       zec-sa#2: 19.9S/s       zec-sa#3: 23.5S/s       zec-sa#4: 24.3S/s       total: 112.2S/s
16:23:33 main : zec-sa#0: 23.8S/s       zec-sa#1: 20.8S/s       zec-sa#2: 16.6S/s       zec-sa#3: 24.2S/s       zec-sa#4: 23.2S/s       total: 108.4S/s
16:23:38 main : zec-sa#0: 23.6S/s       zec-sa#1: 21.0S/s       zec-sa#2: 21.8S/s       zec-sa#3: 23.4S/s       zec-sa#4: 29.2S/s       total: 118.8S/s

It could be a faulty PSU. The restart loop shouldn't lock your PC up like that. I would either try a different PSU or run the miner with one video card at a lower intensity to see if the problem persists.

[rdnkjdi]

Is that why my cards keep showing 0 after 20 or 30 mins? I have 380x 4gb with 4 and 8 gb ram rigs.

This is what my cards look like @ -i 20

6:22:53 main : zec-sa#0: 21.8S/s       zec-sa#1: 19.8S/s       zec-sa#2: 20.2S/s       zec-sa#3: 18.4S/s       zec-sa#4: 31.0S/s       total: 111.1S/s
16:22:58 main : zec-sa#0: 28.6S/s       zec-sa#1: 24.8S/s       zec-sa#2: 26.8S/s       zec-sa#3: 19.0S/s       zec-sa#4: 28.4S/s       total: 127.4S/s
16:23:03 main : zec-sa#0: 23.2S/s       zec-sa#1: 19.2S/s       zec-sa#2: 20.8S/s       zec-sa#3: 22.0S/s       zec-sa#4: 25.6S/s       total: 110.7S/s
16:23:08 main : zec-sa#0: 23.2S/s       zec-sa#1: 23.6S/s       zec-sa#2: 25.4S/s       zec-sa#3: 24.8S/s       zec-sa#4: 27.2S/s       total: 124.0S/s
16:23:13 main : zec-sa#0: 18.0S/s       zec-sa#1: 21.7S/s       zec-sa#2: 24.7S/s       zec-sa#3: 22.1S/s       zec-sa#4: 27.3S/s       total: 113.9S/s
16:23:18 main : zec-sa#0: 24.0S/s       zec-sa#1: 16.8S/s       zec-sa#2: 20.8S/s       zec-sa#3: 22.8S/s       zec-sa#4: 24.4S/s       total: 108.7S/s
16:23:23 main : zec-sa#0: 18.2S/s       zec-sa#1: 21.8S/s       zec-sa#2: 23.8S/s       zec-sa#3: 21.8S/s       zec-sa#4: 27.6S/s       total: 113.1S/s
16:23:28 main : zec-sa#0: 22.5S/s       zec-sa#1: 22.1S/s       zec-sa#2: 19.9S/s       zec-sa#3: 23.5S/s       zec-sa#4: 24.3S/s       total: 112.2S/s
16:23:33 main : zec-sa#0: 23.8S/s       zec-sa#1: 20.8S/s       zec-sa#2: 16.6S/s       zec-sa#3: 24.2S/s       zec-sa#4: 23.2S/s       total: 108.4S/s
16:23:38 main : zec-sa#0: 23.6S/s       zec-sa#1: 21.0S/s       zec-sa#2: 21.8S/s       zec-sa#3: 23.4S/s       zec-sa#4: 29.2S/s       total: 118.8S/s

What brand of 380X's do you have, what's your command line and what driver are you using?  Mine are only getting 15 - 19 sols and I can't figure out what the issue is.