alpha492
|
|
October 11, 2013, 07:51:02 PM |
|
Is there something wrong with the BTC pool? I'm running the SHA-256 Multipool, and whenever it switches over to ZET or TRC I mine and payouts work just fine, but when it switches over to BTC I register a hash rate but I've apparently earned nothing, and I mean like balance is all zeroes even to the billionth of a bitcoin nothing.
EDIT: Also I never get a 1 minute hashrate for my SHA-256 mine (when its on BTC) but I get a 10 minute hashrate.
When I switched my difficulty for sha-256 to 512 I began to get 1 minute hash rates. Also, I made the mistake of running Bit Eruptors and BFL Singles in the same instance of cgminer. The Bit Eruptors are so small they need diff=1 but that is much too fast for a 60 GHps miner. I think that using the highest possible diff for your sha-256 miners would help the pool server cope better with all the new traffic. At diff=512 for BFL Singles I get reject rates <1%. The MP web report also shows a higher hash rate than cgminer reports. Switched my erupters to 1, wow worked like magic good call on that one +1 thx
|
|
|
|
flound1129 (OP)
|
|
October 11, 2013, 10:57:42 PM |
|
EU Pool redundancy is in place.
|
Multipool - Always mine the most profitable coin - Scrypt, X11 or SHA-256!
|
|
|
Aurum
|
|
October 12, 2013, 12:14:24 AM |
|
I dropped my BFL Single to diff=128 and have less than 0.4% rejects all day. Thanks for clarifying that server load question.
|
ghghghfgh
|
|
|
Jriker1
|
|
October 12, 2013, 02:24:21 AM Last edit: October 12, 2013, 03:35:30 AM by Jriker1 |
|
Is there something wrong with the site or WDC? I have been mining WDC directly for a few days now and having consistent payouts. Recently looks like my confirmed has locked and my unconfirmed has as we'll for a number of hours now. even with the mp on WDC not seeing any movement. Also even though I've exceeded my payout threshold it's not paying out.
Confirms of the found blocks seem stuck to.
Thanks.
JR
|
|
|
|
johndec
|
|
October 12, 2013, 03:26:24 AM |
|
Is the CGB hot wallet empty? Been waiting on a payout for a couple of hours now.
|
|
|
|
alpha492
|
|
October 12, 2013, 03:27:13 AM |
|
Not getting any BTC payout for some reason, I guess I'm just mining for you guys for free?
10 Minute Hash Rate 3574 Mh/s Valid Round Shares 128747 Invalid Round Shares 6 Your Efficiency 100% Est. Coins/Block 0.1646 Est. Coins/Day 0.0095 Worker Uptime (last 24h) 18:00:00 (75%) Lifetime Total BTC Earned 0 Total BTC Donated 0 Current N (Round Time) 0 Hours 0 Minutes
|
|
|
|
girlfawkesy
Newbie
Offline
Activity: 55
Merit: 0
|
|
October 12, 2013, 05:25:53 AM |
|
Not getting any BTC payout for some reason, I guess I'm just mining for you guys for free?
10 Minute Hash Rate 3574 Mh/s Valid Round Shares 128747 Invalid Round Shares 6 Your Efficiency 100% Est. Coins/Block 0.1646 Est. Coins/Day 0.0095 Worker Uptime (last 24h) 18:00:00 (75%) Lifetime Total BTC Earned 0 Total BTC Donated 0 Current N (Round Time) 0 Hours 0 Minutes
Because the bitcoin pool has only been operational for a couple of days. Until a block is found a payout wont be made. Thats the idea of a pool if you didn't realize. We all contribute resources until a block is found, then a % of the reward is shared with everyone based on how much they contributed.
|
|
|
|
girlfawkesy
Newbie
Offline
Activity: 55
Merit: 0
|
|
October 12, 2013, 05:33:17 AM |
|
Just curious, maybe this was already addressed but why no peercoin on the sha256 multiport?
|
|
|
|
flound1129 (OP)
|
|
October 12, 2013, 07:22:24 AM |
|
Is there something wrong with the site or WDC? I have been mining WDC directly for a few days now and having consistent payouts. Recently looks like my confirmed has locked and my unconfirmed has as we'll for a number of hours now. even with the mp on WDC not seeing any movement. Also even though I've exceeded my payout threshold it's not paying out.
Confirms of the found blocks seem stuck to.
Thanks.
JR
One of the jobs was hung, should be catching up now.
|
Multipool - Always mine the most profitable coin - Scrypt, X11 or SHA-256!
|
|
|
flound1129 (OP)
|
|
October 12, 2013, 09:03:35 AM |
|
Looks like there were some stratum disconnect issues on the WDC EU pool.. Have been working on that for the last hour or so and I think I have finally resolved it.
|
Multipool - Always mine the most profitable coin - Scrypt, X11 or SHA-256!
|
|
|
flound1129 (OP)
|
|
October 12, 2013, 09:04:47 AM |
|
Just curious, maybe this was already addressed but why no peercoin on the sha256 multiport?
I attempted, but we were having some problems with block submission and PPC doesn't have a working testnet, unfortunately, so I was unable to resolve the issue. I will be giving it another go soon.
|
Multipool - Always mine the most profitable coin - Scrypt, X11 or SHA-256!
|
|
|
fredeq
Legendary
Offline
Activity: 1537
Merit: 1005
|
|
October 12, 2013, 11:14:52 AM |
|
I still cannot mine on eu pool. Either I cant connect or I get stratum disconnect after few secs or just all my cards perform at 600 instead of 700 Mhash. Me an eu pool dont get along Anyway now US pool is starting to report strange things aswell. Like spamming pool diff change between 64 and 512 8 times in a row or something like: Json argument invalid, auth failed, null, (while this happen i get getwork failure but happily miner resumes normally.)
|
|
|
|
disclaimer201
Legendary
Offline
Activity: 1526
Merit: 1001
|
|
October 12, 2013, 12:47:30 PM Last edit: October 12, 2013, 02:27:22 PM by disclaimer201 |
|
I had lots of issues mining at the eu-pool weeks ago and quit mining at multipool altogether. Just restarted again giving it another try and it seems to work ok for the moment.
However, now I'm also mining at the new european sha256 pool with 2 Bitfury Asics 2.5Gh each but get no payouts, neither Zet, Trc, nor Btc. Is that normal?
Edit: Zet payouts seem to work. Understood why there are no payouts for Btc yet. Are there many confirmations required for TRC, then maybe that's why.
Edit: Everything's fine. Waiting for first Btc block.
|
|
|
|
peonminer
|
|
October 12, 2013, 02:41:14 PM |
|
Flound, SHA-256 support. You are GOD. Nuff' Said.
|
|
|
|
disclaimer201
Legendary
Offline
Activity: 1526
Merit: 1001
|
|
October 12, 2013, 05:20:37 PM |
|
Does someone have an idea to which diff I should set my 2x 2.5GH miners? Does the diff setting work on the EU Asic Mpool?
|
|
|
|
Aurum
|
|
October 12, 2013, 08:49:27 PM |
|
Does someone have an idea to which diff I should set my 2x 2.5GH miners? Does the diff setting work on the EU Asic Mpool?
Are those the new BitFury 2.5 GHps miners? I don't have one but what I'd do is start at 1 and see how it runs. Then try, 2, 4, 8, 16, 32 and see when rejects start appearing. Back up and use that diff. To know if diff is working change the diff in your Account/Manage Workers and update that worker. You have to restart cgminer for it to take effect. It'll tell you the pool, username and diff you log in with at the top of cgminer. Please let us know what you find.
|
ghghghfgh
|
|
|
sudwtf
Newbie
Offline
Activity: 34
Merit: 0
|
|
October 12, 2013, 10:57:12 PM |
|
Is there a list of minimum transaction amounts to avoid transaction fees?
|
|
|
|
TheDirtybird
Full Member
Offline
Activity: 206
Merit: 100
http://canadianbit.com/ - Let's Mine Canadian!
|
|
October 13, 2013, 01:40:36 AM |
|
Ya same type of question.. what will be the minimum auto payout amount for BTC? It surely can't be 1BTC..lol Might want to make a page or state it on account page what minimum auto payouts for all coins are. Thank you!
|
|
|
|
flound1129 (OP)
|
|
October 13, 2013, 03:42:45 AM |
|
Does someone have an idea to which diff I should set my 2x 2.5GH miners? Does the diff setting work on the EU Asic Mpool?
You want to be submitting a share every 3-5 seconds, use whatever gives you that. 8 or 16 should probably work well.
|
Multipool - Always mine the most profitable coin - Scrypt, X11 or SHA-256!
|
|
|
flound1129 (OP)
|
|
October 13, 2013, 03:43:37 AM |
|
Ya same type of question.. what will be the minimum auto payout amount for BTC? It surely can't be 1BTC..lol Might want to make a page or state it on account page what minimum auto payouts for all coins are. Thank you! It won't be 1 BTC, I haven't decided yet whether it will be .1 or .01. I'm leaning toward .1.
|
Multipool - Always mine the most profitable coin - Scrypt, X11 or SHA-256!
|
|
|
|